35/2025-26

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.

Replacement/P/F/T/C of Emergency Lights (16/20W x 2 Nos.) Twin LED emergency Swivel type Beam Lights having minimum 90 Minutes and upto 5 Hours Battery Backup, Made out of CRCA/MS Powder Coated Sheet as per manufacturer’s Design, 12V, 7AH SMF Battery, Overcharging and Low Battery Protection, Fuse suitable for operation on 230V 50 Hz AC Supply etc. complete in all respect to the entire satisfaction of Fire Officer.

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. a) 30 M

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

80 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Stainless steel

Supplying, Fixing, Testing & Commissioning of CO2 gas cylinder of 45 Kg. capacity seamless steel manufactured as per IS:7285/1988 duly inspected and certified by BIS (ISI) and approved by Deptt. of explosive Nagpur with ISI marked valve painted with red colour complete all as specified and as directed by the Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of gas weighing weight surveillance module assembly with locking arrangement fabricated out of 1.6mm thick MS square tube powder coated with approved shade suitable for NFPA 12 with online gas weighing scale 04Nos. with platform, collar and necessary cables including connections complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge. a) 4 Cylinder digital weighing monitor scale.

Supplying, Fixing, Testing & Commissioning of CO2 pressurized valve approved make and quality for manual and automatic gas release complete complete all as specified and as directed by the Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of 2 Kg. capacity with gas (Nitrogen) pilot cylinder made of heavy duty gauge seamless tube & fitted with specifically designed valve suitable for accepting pressure gauge & gun metal rod with require accessories complete all as specified and as directed by the Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of wire braided main header hose pipe for connecting main cylinder to manifold of 8 mm dia and length 24" etc. complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of wire braided R-1 flexible pipe (Length 20" and dia 8 mm) for connecting nozzle complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of wire braided flexible pipe for interconnection of cylinder of dia 6 mm and length 14 inches etc. complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of gun metal lever of standard make of approved quality for manual gas release complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of gun metal non return valve of standard size and make of approved quality complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Supplying, fixing, testing & commissioning of CO2 discharge nozzle made of gun metal which is designed to prevent high velocity CO2 discharge & subsequent unbalance and the nozzle should be drilled to the required orifice size depending on the design flow rate complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Providing, fixing, testing & commissioning of ASTM schedule-40 pipes of following diameters for connecting the complete system complete in all respect.

a) 25 mm dia

Providing, fixing, testing & commissioning of ASTM schedule-40 pipes of following diameters for connecting the complete system complete in all respect.

b) 50 mm dia

Supplying, fixing, testing & commissioning of manifold made of ASTM106 with the bracket & clamping arrangements etc. complete in all respect to the entire satisfaction of Fire Officer / Engineer-In-Charge.

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete etc. as required

Supply and fixing of 2 hour fire rated Steel Fire Door Frame 100x57mm single rebated as per site and location complete with directions of Engineer-in-charge/ Fire Officer. a) The door frame shall be 2 hours 3 criteria rating (Stability, Integrity and thermal Insulation) fire door- fabricated and complying with requirements of CBRI Roorkee/Government Department and conforming to relevant BS: 476 Part 20 & 22 & IS: 3614 Part II. b) The frame shall be fabricated from 1.6 mm thick galvanized steel sheet conforming to IS:277 with a factory pre-punhced groove so as to accomodate Fire & smoke seal size 10 x 4mm Frames should be butt jointed and field assembeled with bolting sytem for proper strength. Frames shall be provided with holdfasts, fasteners etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. Note: The frame shoule be finished with Powder coating in desired shade.

Providing and Fixing 46 mm thick Steel fire check door shutter of 120 minutes fire rating for stability & Integrity & 20 minutes of insulation confirming to BS:476 Part 22 and IS: 3614 Part II fabricated with 2 nos. 1.2 mm thick galvanized sheet with infill of fire rated Mineral Wool insulation filler of 64 Kg./M3 bonded to both faces of sheet with lock seam joints at stile edges and internal reinforcement at top, bottam and stile edges for fire rating. The door frames are manufactured from 1.6mm thick galvanized steel sheet pressed form to single Rebate profile of size 100mm 57mm. The door frames and door shutters are finished with "H" primer plus powder coating etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. Note: The shutter shoule be finished with Powder coating in desired shade.

Supply and fixing of 6mm thick, 2 Hrs. Fire Rated clear glass size 200 x 300, which can also withstand thermal shock upto 800 degree centigrade shall be used as in vision panel and is to be fixed in between the glass beading by using ceramic fiber and fire rated acrylic sealant in accordance with BS : 476 Part 22, EN 1363/EN 1364 for stability and integrity etc complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Providing and fixing of 2 hour fire rated Door Closers UL tested for fire doors, fire tested in accordance of EN 1634-3 and for mechanical test to EN 1154 for 50000 cycles and shall be tested with fire door for 2 Hours fire rating door weight upto 36 kg, to 80 Kg and door width from 701mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Supplying and Fixing of Stainless Steel Tower Bolt of 300 x 10 mm 2 hrs Fire rated on existing double leaf door shutters openable inside or outside etc. complete U.L. listed, CBRI tested complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Providing and fixing stainless steel 304 Grade D - Type pull handle 2 hrs fire rated of size 300 mm long and 22 mm Dia including stainless, Caps, nuts and bolts etc. of required size complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Providing and Fixing of 2hrs fire rated Mortice dead Lock of superior quality complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Condition- Credit of unserviceable materials including dismantling the following existing irrepairable parts including removal from site complete all as specified and as directed by Fire Officer/Engineer-in-Charge. 1. M.S. scrap Rs. 41.17 per Kg 2. Gun Metal Scrap @ Rs. 300/- Kg.

Please Enable Macros to View BoQ information