MIRPA-Construction of field channel near ch 0.300 km of Nettinampilly LIS in ward 6 of Kalady Gramapanchayath

Amount

Appx.A.-Civil Works

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc complete as per the direction of departmental officers at site

2.6.1 : Earth work excavation in all classes of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, with all leads and lifts , disposed earth to be levelled and neatly dressed etc complete as per the direction of departmental officers at site

4.1.8 : Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level etc complete as per the direction of departmental officers at site

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for side wall of canal etc complete as per the direction of departmental officers at site

4.1.6 : Providing and laying in position cement concrete of specified grade 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level etc complete as per the direction of departmental officers at site

4.1.3 : Providing and laying in position cement concrete of specified grade 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)excluding the cost of centering and shuttering - All work up to plinth level etc complete as per the direction of departmental officers at site

13.16.1 : Providing and laying 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)etc complete as per the direction of departmental officers at site

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size )excluding the cost of centering, shuttering, finishing and reinforcement, All work up to plinth level:etc complete as per the direction of departmental officers at site

5.22.6 : Steel reinforcement for R.C.C work using Thermo - Mechanically Treated bars of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc complete as per the direction of departmental officers at site

APPX B PUMP HOUSE RENOVATION

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size )excluding the cost of centering, shuttering, finishing and reinforcement, All work up to plinth level:etc complete as per the direction of departmental officers at site

5.1.3 :Providing and laying in position specified grade of reinforced cement concrete, 1:2:4 (1 cement:2coarse sand :4 graded stone aggregate 20 mm nominal size )excluding the cost of centering, shuttering, finishing and reinforcement, All work up to plinth level:etc complete as per the direction of departmental officers at site

5.22.6 : Steel reinforcement for R.C.C work using Thermo - Mechanically Treated bars of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc complete as per the direction of departmental officers at site

50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete as per the direction of departmental officers at site

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood etc complete as per the direction of departmental officers at site

14.29 : Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows etc complete as per the direction of departmental officers at site

50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling using Anjily /Jack wood etc complete as per the direction of departmental officers at site

50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood etc complete as per the direction of departmental officers at site

9.9.3.2 : Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.30 mm thick etc complete as per the direction of departmental officers at site

15.39.1 : Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Upto 10 mm thick etc complete as per the direction of departmental officers at site

15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet etc complete as per the direction of departmental officers at site

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers etc complete as per the direction of departmental officers at site

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform etc complete as per the direction of departmental officers at site

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre etc complete as per the direction of departmental officers at site

13.1.1 :Providing and laying 12 mmthick cement plaster of mix:1:4 ( 1 cement : 4 fine sand) etc complete as per the direction of departmental officers at site

10.6.2 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top etc complete as per the direction of departmental officers at site

Bidder Name

K A JOY