Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹44.4 LAccepted-AOC VILL DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | ₹44.4 L Quoted ₹46.2 L | L-1 | Accepted-AOC Being L1 |
| 2 | L-2₹46.2 L+₹4,769.13 (0.10%)Rejected-Finance | ₹46.2 L+₹4,769.13 (0.10%) | L-2 | Rejected-Finance Being other than L1 |
| 3 | L-3₹49.0 L+₹2.8 L (6.08%)Rejected-Finance | ₹49.0 L+₹2.8 L (6.08%) | L-3 | Rejected-Finance Being other than L1 |
| 4 | L-4₹49.1 L+₹2.9 L (6.28%)Rejected-Finance | ₹49.1 L+₹2.9 L (6.28%) | L-4 | Rejected-Finance Being other than L1 |
| 5 | L-5₹50.9 L+₹4.8 L (10.3%)Rejected-Finance | ₹50.9 L+₹4.8 L (10.3%) | L-5 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | M/s. RAMPHAL GARG L5 | M/S SHYAM ENTERPRISE L6 | SHIVAAY CONSTRUCTIONS L3 | M/S Pradeep Enterprise L4 | SAILESH GIRI L2 | SHRI ARABINDA GHOSH L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down Chowkhats or frame exc 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the frame complete all as specified and as directed. | 30 | Each | 250 ₹7,500 | 300 ₹9,000 | 260 ₹7,800 | 275 ₹8,250 | 250 ₹7,500 | 245 ₹7,350 Lowest |
| 2.00 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site complete all as specified and as directed. | 35 | Per leaf | 100 ₹3,500 | 92 ₹3,220 | 100 ₹3,500 | 84 ₹2,940 Lowest | 88 ₹3,080 | 85 ₹2,975 |
| 3.00 | S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm, 1.25mm thick complete all as specified and as directed. | 153 | RM | 355 ₹54,315 | 400 ₹61,200 | 380 ₹58,140 | 360 ₹55,080 | 360 ₹55,080 | 350 ₹53,550 Lowest |
| 4.00 | S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. | 168 | RM | 470 ₹78,960 | 500 ₹84,000 | 480 ₹80,640 | 450 ₹75,600 Lowest | 455 ₹76,440 | 450 ₹75,600 Lowest |
| 5.00 | M&L for 2nd class hard wood for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in pieces for replacing one leg or certain portion of decayed portion without taking down chowkhat or frame by cutting existing length/portion complete including making good disturbed opening by rich mortar in CM 1:4 all as specified and as directed. | 0.27 | Cum | 83,550 ₹22,558.5 | 90,000 ₹24,300 | 85,000 ₹22,950 | 87,500 ₹23,625 | 79,200 ₹21,384 Lowest | 80,000 ₹21,600 |
| 6.00 | S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I kiln seasoned and chemically pressure treated. complete all as specified and directed. | 45 | Sqm | 3,250 ₹1,46,250 | 3,300 ₹1,48,500 | 3,200 ₹1,44,000 | 3,200 ₹1,44,000 | 3,105 ₹1,39,725 | 3,100 ₹1,39,500 Lowest |
| 7.00 | S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkhats complete all as specified and as directed. | 45 | Sqm | 2,900 ₹1,30,500 | 3,000 ₹1,35,000 | 2,800 ₹1,26,000 | 2,725 ₹1,22,625 | 2,710 ₹1,21,950 | 2,700 ₹1,21,500 Lowest |
| 8.00 | S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain color PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain color PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction, specification. complete all as specified and directed. | 45.5 | Sqm | 2,650 ₹1,20,575 | 2,800 ₹1,27,400 | 2,700 ₹1,22,850 | 2,600 ₹1,18,300 | 2,490 ₹1,13,295 Lowest | 2,500 ₹1,13,750 |
| 9.00 | Easing of door shutters for properly closing/opening, tighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt but exc. 1.00 Sqm not exc 2.00 sqm etc complete all as specified. | 20 | Each | 50 ₹1,000 | 53 ₹1,060 | 60 ₹1,200 | 47 ₹940 Lowest | 47 ₹940 Lowest | 48 ₹960 |
| 10.00 | Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening all as specified and as directed. | 10 | Each | 230 ₹2,300 | 225 ₹2,250 | 220 ₹2,200 | 240 ₹2,400 | 205 ₹2,050 | 200 ₹2,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Jan 2026, 6:00 pmClosed
GE (North) Binnaguri
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
CERTAIN REPAIR OF B/R AND EM SERVICES AT CERTAIN MD ACCN IN MANOJ PANDEY VIHAR UNDER GE NORTH BINNAGURI
2025_MES_734886_2
8701 / 74 / 2025-26 / 07 / E8
Open Tender
Civil Works
Item Rate
270 days
Binnaguri cantonment
D class catg a(i)
8 documents required · 8 mandatory
₹500
GE (North) Binnaguri
₹90,000
Yes
19 Feb 2026
20 Dec 2025
5 Jan 2026
20 Dec 2025
3 Jan 2026
27 Dec 2025
Each Set
S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkhats complete all as specified and as directed.
S&F rolled mild steel equal angles framed work confirming of Fe-290 (Gde-E-165) including welding, drilling for holes as necessary for fixing door frame, verandah jali, mesh and staple etc complete all as specified and directed.
S&F aluminium handles cast type anodised 150mm of size. complete all as specified and directed.
All as item No 22 above but fixed type complete all as specified and directed.
S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars as per CESZ/2018/TD 07 sheet No. 1 to 3 complete all as specified and directed.
M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as directed.
M&L for one coat of white wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.
M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed.
Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F vitreous china squatting pan"Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one complete all as specified and directed.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .
Dismantling of Plain or profile steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings .
M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.
S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.
S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.
S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and as directed.
S & F switch piano single pole flush type, two way, 5 amps, 230 volts complete all as specified and directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed.
S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S & F in replacement MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.
S & F in replacement MCB SPN 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps complete all as specified and as directed.
S & F bell push flush type 5 amps, 230 volts complete all as specified and directed.
S & F in replacement MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB's all as specified and as directed.
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.
All as per item No110 above but using two run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks complete all as specified and as directed.
S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with and taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. complete all as specified and as directed. (NOTE : Two run of submain wiring cable alongwith one run of earth wire with and including 25mm dia PVC conduit pipe shall be measured as one unit length).
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Sch.pdf
Additional Documents • 0.39 MB
Tender.pdf
Tender Documents • 1.96 MB
BOQ_834742.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .