Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.5 LAccepted-AOC M 13A PUNJ HOUSE CONNAUGHT PLACE NEW DELHI DELHI DELHI 110001 | NEW DELHI | DELHI | 110001 | ₹8.5 L | 1 | Accepted-AOC Lowest Bidder |
| 2 | 2₹10.4 L+₹1.9 L (22.5%)Rejected-Finance 1 CORRIGENDUM ADDENDUM 01 DATED 2 YOUR TENDER SUBMITTED ON 31 10 2025 04 10 2025 ON E TENDER WEBSITE 3 YOUR PRICE BID OPENED ON 31 10 2025 ON E TENDER WEBSITE | ₹10.4 L+₹1.9 L (22.5%) | 2 | Rejected-Finance Rejected due to non - Lowest bid |
| 3 | Rejected-Technical 662 7 KHANDELWAL KHANDELWAL GURUNANAK SCHOOL MARHATAL JABALPUR MADHYA PRADESH 482002 | JABALPUR | MADHYA PRADESH | 482002 | - | - | Rejected-Technical 1 ISO certifications submitted by the bidder is from QRO and UKAF which are not QABCB certified agencies. 2 Audited balance sheets and PL statement for 2024 25 are not submitted |
| 4 | Rejected-Technical | - | - | Rejected-Technical 1 The Bidder has availed the EMD exemption under MSE category, as per the tender conditions the bidder is not registered in the required category Hence EMD exemption cannot be admissible 2 Audited balance sheets and PL statement for 2022 23 and 2024 |
| 5 | Rejected-Technical NO 6 BHEEMNAGAR MADARMADDI ROAD DHARWAD 580001 | DHARWAD | KARNATAKA | 580001 | - | - | Rejected-Technical 1 The Bidder has availed the EMD exemption under MSE category as per the tender conditions the bidder is not registered in the required category. Hence EMD exemption cannot be admissible 2 The bidder has not submitted ISO certifications and BIFMA com |
| Sl No | Description | Qty | Unit | Eurocoustic Products Ltd | Royal Safe Company KB |
|---|---|---|---|---|---|
| 1.00Laying and Jointing PVC Pipe. Heading | |||||
| 1.01 | Providing, supplying, fabricating, Installation, transportation, loading, unloading, placing in position Single bed of Size 1940mm (L) x 1030mm (W) x 465 mm(H) with under storage boxes.
The Bed shall be made up of 18mm thick BWP grade ply shall be pasted lamination on all sides with edge banding tape (1mm thick - American Walnut on visible sides and 0.8mm thick plain laminate on inner face).
Headboard: (900mm Height): 38mm (12mm+12mm+12mm) thick BWP Ply with laminate on all sides with a fillet cut of R50 at the top corners.
Footboard (515mm Height): 38mm (12mm +12mm+12mm) thick BWP ply with laminate on all sides fillet cut of R50 at the top corners.
Base Plank: 18mm thick BWP RAW Ply as mattress back panel.
Side Plank: 18mm thick BWP ply with laminate on all sides.
Under storage boxes: The 2 No's of equal size drawers of 850mm depth made up of 18mm thick BWP ply with laminate on all sides mounted on castors (min of 5 castors on each drawer) and concealed 'G' handle on drawer fascia.
Metal Frame:
Horizontal Members: 2 no's of main members - Made up of 25x50x1.6mm thick MS pipe with black color powder coating.
5 No's of crossmembers made up of 25x25x1.6mm thick MS Pipe with black color powder coating.
Vertical Legs: 6 No's of supports made up of 25x25x1.6mm thick MS Pipe with black color powder coating.
All the Horizontal, vertical MS members to connected using nut and bolts.
A Minimum of 50 microns to be done for powder coating.
The connectivity of the headbboard, footboard, side planks, fascia to the bed frame is done by clamping brackets made up of 2mm thick CRCA which are welded on MS frame.
Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Adjustable levelling screws at the bottom of the ply at equal distance. Nothing extra will be paid.
Drawing No. - H 12 - BED - ID - 101 A | 12 | Nos | 2,52,000 ₹2,52,000 Lowest | 3,95,280 ₹3,95,280 |
| 1.02 | Providing, supplying, fabricating, Installation, transportation, loading, unloading, placing in position Wooden wardrobe of Size 900mm (L) x 600mm (W) x 2100mm (H). The wardrobe shall be made up of 18mm thick BWP grade ply shall be pasted lamination on all sides with edge banding tape (1mm thick - American Walnut on visible sides and 0.8mm thick plain laminate on inner face).
Back Panel: 12mm thick BWP Ply with lamination on all sides.
Side Panels: 18mm thick BWP Ply with lamination on all sides.
Top & Bottom Panels: 18mm thick BWP Ply with lamination on all sides.
Bottom Skirting: 18mm thick BWP Ply with lamination on all sides.
Openable Shutters: 18mm thick BWP Ply with lamination on all sides.
Shelves: 18mm thick BWP Ply with lamination on all sides.
Edge banding: All edges of the wardrobe and shelves finished with 2mm thick edge banding to match with laminate.
Accessories / Fittings:
The shutters should be fixed with carcass unit using soft closing hinges.
Two Numbers of latches to be provided on the inactive shutter.
Wardrobe lock to be provided on the active shutter.
Concealed handles to be provided on both shutters.
Aluminium pipe / rod to be provided for hangers.
Adjustable levelling screws at the bottom of the wardrobe
Magnetic catcher to be provided for shutters to be placed in the position.
Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Nothing extra will be paid.
Drawing No. - H 12 - WARDROBE - ID - 201A | 12 | Nos | 3,57,600 ₹3,57,600 Lowest | 4,32,000 ₹4,32,000 |
| 1.03 | Providing, supplying, fabricating, installation, transportation, loading, unloading, placing in position Study Table with pedestal.
Table Size: 1200mm (L) x 600mm (W) x 750 mm(H)
Pedestal Size: 450mm (L) x 450mm (W) x 700 mm(H)
The table should be supported on 50x50x1.6mm thick MS Powder coated legs on side and other side on the wooden pedestal fixed to the table top and inter connection with a cross member of 40x40x1.6mm thick MS Powder coated using nut and bolts, screws with woodne surface. Table top is supported on metal frame using screws. The connectivity of the table top with MS structure is done by clamping brackets made up of CRCA which are welded on MS frame.
Table Top: 18mm thick BWP ply with laminate on all sides.
Edge banding: All edges of the wardrobe and shelves finished with 2mm thick edge banding to match with laminate.
Pedestal (2 Drawers + 1 Filling unit):
Drawer body, drawer bottom & pedestal back are made up 12mm thick BWP ply with laminate on all sides.
Pedestal side panels, top skirting, bottom skirting & drawers fascia are made up of 18mm thick BWP ply with laminate on all sides.
Hardwares / Fittings:
Pedestal drawers are mounted on 450mm Telescopic slide for pull out.
Adjustable levelling screws at the bottom of the Table and pedestal.
Concealed Handle for the pedestal drawers
Centralized locking system.
Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Nothing extra will be paid.
Drawing No. - H 12 - STUDY TABLE WITH PEDESTAL - ID - 301A | 12 | Nos | 2,26,800 ₹2,26,800 | 2,03,040 ₹2,03,040 Lowest |
| 1.04 | Supply of Mattress of Size - (71 Inch X 38 Inch x 5 Inch) / (1803 mm x 980mm x 125mm)
- Top Layer 25mm coir 80D, bottom layer - 100mm rebounded 70D, Top quilting (8+8), bottom quilting 8mm | 1 | Nos | 9,800 ₹9,800 | 6,300 ₹6,300 Lowest |
Tender Value
₹11.5 L
EMD Value
₹23,200
Closing Date
9 Sept 2025, 4:00 pmClosed
Head (Projects)
IIM Visakhapatnam Gambheeram Village Anandapuram Mandal, Visakhapatnam
Supply and fixing of Furniture in Hostel 12 at permanent campus of IIM Visakhapatnam
2025_IIMV_873575_1
IIMV/PMO/T/01/2025-26
Open Tender
Civil Works - Others
Item Rate
60 days
IIM Visakhapatnam
As per Tender Document
7 documents required · 7 mandatory
₹0
₹23,200
Yes
IIM Visakhapatnam
5 Jun 2026
18 Aug 2025
10 Sept 2025
18 Aug 2025
9 Sept 2025
18 Aug 2025
18 Aug 2025 - 21 Aug 2025
21 Aug 2025
Laying and Jointing PVC Pipe. Heading
Providing, supplying, fabricating, Installation, transportation, loading, unloading, placing in position Single bed of Size 1940mm (L) x 1030mm (W) x 465 mm(H) with under storage boxes. The Bed shall be made up of 18mm thick BWP grade ply shall be pasted lamination on all sides with edge banding tape (1mm thick - American Walnut on visible sides and 0.8mm thick plain laminate on inner face). Headboard: (900mm Height): 38mm (12mm+12mm+12mm) thick BWP Ply with laminate on all sides with a fillet cut of R50 at the top corners. Footboard (515mm Height): 38mm (12mm +12mm+12mm) thick BWP ply with laminate on all sides fillet cut of R50 at the top corners. Base Plank: 18mm thick BWP RAW Ply as mattress back panel. Side Plank: 18mm thick BWP ply with laminate on all sides. Under storage boxes: The 2 No's of equal size drawers of 850mm depth made up of 18mm thick BWP ply with laminate on all sides mounted on castors (min of 5 castors on each drawer) and concealed 'G' handle on drawer fascia. Metal Frame: Horizontal Members: 2 no's of main members - Made up of 25x50x1.6mm thick MS pipe with black color powder coating. 5 No's of crossmembers made up of 25x25x1.6mm thick MS Pipe with black color powder coating. Vertical Legs: 6 No's of supports made up of 25x25x1.6mm thick MS Pipe with black color powder coating. All the Horizontal, vertical MS members to connected using nut and bolts. A Minimum of 50 microns to be done for powder coating. The connectivity of the headbboard, footboard, side planks, fascia to the bed frame is done by clamping brackets made up of 2mm thick CRCA which are welded on MS frame. Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Adjustable levelling screws at the bottom of the ply at equal distance. Nothing extra will be paid. Drawing No. - H 12 - BED - ID - 101 A
Providing, supplying, fabricating, Installation, transportation, loading, unloading, placing in position Wooden wardrobe of Size 900mm (L) x 600mm (W) x 2100mm (H). The wardrobe shall be made up of 18mm thick BWP grade ply shall be pasted lamination on all sides with edge banding tape (1mm thick - American Walnut on visible sides and 0.8mm thick plain laminate on inner face). Back Panel: 12mm thick BWP Ply with lamination on all sides. Side Panels: 18mm thick BWP Ply with lamination on all sides. Top & Bottom Panels: 18mm thick BWP Ply with lamination on all sides. Bottom Skirting: 18mm thick BWP Ply with lamination on all sides. Openable Shutters: 18mm thick BWP Ply with lamination on all sides. Shelves: 18mm thick BWP Ply with lamination on all sides. Edge banding: All edges of the wardrobe and shelves finished with 2mm thick edge banding to match with laminate. Accessories / Fittings: The shutters should be fixed with carcass unit using soft closing hinges. Two Numbers of latches to be provided on the inactive shutter. Wardrobe lock to be provided on the active shutter. Concealed handles to be provided on both shutters. Aluminium pipe / rod to be provided for hangers. Adjustable levelling screws at the bottom of the wardrobe Magnetic catcher to be provided for shutters to be placed in the position. Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Nothing extra will be paid. Drawing No. - H 12 - WARDROBE - ID - 201A
Providing, supplying, fabricating, installation, transportation, loading, unloading, placing in position Study Table with pedestal. Table Size: 1200mm (L) x 600mm (W) x 750 mm(H) Pedestal Size: 450mm (L) x 450mm (W) x 700 mm(H) The table should be supported on 50x50x1.6mm thick MS Powder coated legs on side and other side on the wooden pedestal fixed to the table top and inter connection with a cross member of 40x40x1.6mm thick MS Powder coated using nut and bolts, screws with woodne surface. Table top is supported on metal frame using screws. The connectivity of the table top with MS structure is done by clamping brackets made up of CRCA which are welded on MS frame. Table Top: 18mm thick BWP ply with laminate on all sides. Edge banding: All edges of the wardrobe and shelves finished with 2mm thick edge banding to match with laminate. Pedestal (2 Drawers + 1 Filling unit): Drawer body, drawer bottom & pedestal back are made up 12mm thick BWP ply with laminate on all sides. Pedestal side panels, top skirting, bottom skirting & drawers fascia are made up of 18mm thick BWP ply with laminate on all sides. Hardwares / Fittings: Pedestal drawers are mounted on 450mm Telescopic slide for pull out. Adjustable levelling screws at the bottom of the Table and pedestal. Concealed Handle for the pedestal drawers Centralized locking system. Note: All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. Nothing extra will be paid. Drawing No. - H 12 - STUDY TABLE WITH PEDESTAL - ID - 301A
Supply of Mattress of Size - (71 Inch X 38 Inch x 5 Inch) / (1803 mm x 980mm x 125mm) - Top Layer 25mm coir 80D, bottom layer - 100mm rebounded 70D, Top quilting (8+8), bottom quilting 8mm
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .