DEPOSIT Work CFC Fund Multimedia filtration iron removal plant and chlorine Kattakampal Grama Panchayath

Pressure Sand Filter ,iron remoal filter and activated carbon filter

OD176225/2024-2025:Supply and installation of Storage tank, 10,000L, Aqua Tech,Capacity : 10000L MOC : PE, Black, 2 layers- ISI

OD176226/2024-2025:Supply and installation of Dosing Pump, 6LPH @ 10kg/cm2,Dosing Pump : 1No,Type : Diaphragm,Capacity : 6LPH @ 10kg/cm2,Origin : E-dose,Dosing Tank, 100L, PP : 1No

OD176228/2024-2025:Supply and installation of Filter feed pump, 1HP, Single PhaseCapacity : 1HP,Flowrate : 3,000LPH @ 25m Head Phase : Single Phase,Brand : Kirloskar/Equivalent,Control Panel : 1No

OD176230/2024-2025:Supply, Installation of Control Panel with change over

OD176231/2024-2025:Supply, assembly and installation of pressure sand filter, 3m3/hr,Origin : Pentair/Alfa Aerosol MOC : Poly-glass, 1665,Flow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Multi-port Valve : 1 No, Side Mounted, Manual,Distributors : 1set Pressure Gauge : 1No

OD176232/2024-2025:Supply, assembly and installation of iron removal filter, 3m3/hr,Origin : Pentair/Alfa Aerosol,MOC : Poly-glass, 1665 Flow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Katalox Light (Germany), MnO2,Multi-port Valve : 1 No, Side Mounted, Manual,Distributors : 1set Pressure Gauge : 1No

OD176233/2024-2025:Supply, assembly and installation of activated carbon filter, 3m3/hr,Origin : Pentair/Alfa Aerosol,MOC : Poly-glass Flow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Activated Carbon IV 1100,Multi-port Valve : 1 No, Side Mounted, Manual Distributors : 1set, Pressure Gauge : 1No

OD176234/2024-2025:Supply and installation of NRV, 1?,MOC : SS 304,Origin : Enolgas, ITALY

OD176235/2024-2025:Supply and installation of Level Controller

Tank Support

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

OD3278/2025-2026:KSEB Connection charges,lighting connection for pump house including material cost and labour charges ,all works etc..completed

Please Enable Macros to View BoQ information