Installation and Energisation of GHATMAL-I L.I. Project under SINAPALI Block in NUAPADA District (RIDF-XXX 2025-26)

Filling in F&P with excavated materials including well watered and rammed. .(Mechanical 60% & Manual 40%)

Filling F and P with sand, well watered and rammed

Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal (Crusher Broken)

RCC/Cement Concrete (1:2:4) with 12mm (½”) size hard granite chips including Hoisting and laying (Crusher broken)

FLY Ash Brick masonary in cm(1:6) in foundation and plinth (25cm X 12cm X 8cm size)

FLY Ash Brick masonary in cm(1:6) in Superstructure work ( 25cm X 12cm X 8cm size )

12mm thick Cement plaster in CM (1:6) over brick work

Cement punning over plastering

Rigid smooth centering shuttering for R.C.C. work including all cost etc. complete Roof slab, R.C.C. floor, Landing Balcony, Projection sun shed & Chajja, Sheles

(A) Column Base

(B) Columns

( C ) Plinth Bend Floor Slab Beams and Roof Slab,cornice,Lintels ,Chajjas.

Cost of 40 mm sige HG metal for spreading

2.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete

Labour charge for M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl.

Distempering two coats to walls with distemper of approved shade on new area

Painting two coats with enamel paint for priming over iron work indcluding (Door & Window)

Labour charge for spreding of metal (Labour only)

White washing 2 coats with shell lime.

Cost of 45mm Dia steel Pipe of Length 6mtr & cost of 4mm thick ( 1.2m x 0.9m ) 33.91 kg MS Plate inlcluding fitting , fixing , bracing & welding etc

Cost of Stickering & Lettring with radium Boarder

Cost of M.S. Pannel Iron door with M S Frame etc. (Size 1 x 1.00m x 1.80 m ) weight 63kg

Cost of M.S. Pannel Iron Window with M S Frame etc. (Size 1 x 0.90m x 0.75 m ) weight 23.625 kg

Cost of Pump Chamber wiring with all electrical materials like conduit pipe, switchs, holders, bulbs & board etc. including labour cost.

Provision for foundation nut bolt, Rubber insertion, including cost of cutting, threading & Fabrication etc

Cost of 12.5 HP Centrifugal monoblock pumpset having 0.028 cumec discharge and 20 Mtr. head

Cost of 15 HP Control Pannel with Auto star delta starter & MCB

Cost of 63 Amp -400 Main Switch confirming to IS No.4064

Cost of Base Plate for pannel board Made of MS Channel for Motor

Cost of Pannel Board with stand

Cost of Base Frame for Pannel Board (0.4m x 0.2m)

Cost of Motor Hood made out of 18mm gauge CR sheet

Cost of 6 KVAR Capacitor

Cost of 3x16mm2 T.D. cable

Cost of 4mm2 PVC Wire (Copper)

Cost of 4.00 mm2 Submerssible (3 Core) Flat Cable ISI mark

Cost of Electrical Earthing (for 2nos= 1 set)

Cost of 100 mm Ø G.I. Bend (Medium duty)

Cost of 100 mm Ø G.I. Flange (Medium duty)

Cost of 100 mm Ø C.I. Foot Valve

Cost of 100 mm Ø Sluice Valve

Cost of 100 mm Ø C.I.Reflux Valve (NR)

Cost of 200 mm Ø HDPE Pipe PN-4, PE-80

Cost of complete Jointing Charges of 200 mm dia HDPE pipe etc

Labour charges for laying , fitting & Fusion welding of 200 mm Ø HDPE Pipe PN-4/6, PE-80 including Transporation

Cost of 160 mm Ø HDPE Pipe PN-4, PE-80

Labour charges for laying , fitting & Fusion welding of 160 mm Ø HDPE Pipe PN-4, PE-80 including Transporation

Cost of complete Jointing Charges of 160 mm dia HDPE pipe etc

cost of 160 mm Slipon Flange , Tail Piece and all fittings

200 mm HDPE End Cap

160 mm HDPE End Cap

160x160x160 HDPE Equal Tee (Spigot Design)

200x200x160 HDPE Equal Tee (Spigot Design)

Cost of 160mm Butterfly Valve

Cost of 50 mm Ø Air release valve with saddle & Raiser pipe (KS)

Cost of 160 mmx160mmx110 mm G.I.Tee with accessories & Outlet

Cost of River Bank cutting & shaping for const. of P.F.

Cost of 110 mm G.I Socket

Cost of 100x100x25mm G.I. Tee with Plug for priming

Cost of 200 mmx110 mm G.I./M.S. Reducer Socket

Misc. Welding charges for "Z" joint, "S" bend, etc.

Cost of cuttng and filling of trench for overburden earth and ridges of plots over and above stabdard estimate of trenc for pipe line

Cost for Electrical Installation & energisation & Installtion of MB pump set with Trail run including fitting of Sluice Valve, NR valve, Butterfly Valve etc incluing labour cost and fitting materials.

Cost of 11/0.4 KV 25 KVA Transformer (BIS Energy level -II) DPM S/S

Cost of 3Ph.3 W 11 KV Line with 55 mm2 AAAC on 300 Kg 9 Mtr long PSC Pole having one taping point & two cut points (Span length-60Mtr)

Cost for construction 3Ph 4W AB cable L.T. Line with 50mm2 cable, L.T. distribution box with accessories.

11KV line single pole Cut point

11KV Taping pole with all accessories

Cost for construction 3Ph 4W AB cable L.T. Line with 50mm2 cable, L.T. distribution box with accessories.

11KV line single pole Cut point

11KV Taping pole with all accessories