Augmentation Work of Popatpara (Ronki) Sewage Pumping Station with 2 Year Comprehensive Operation and Maintenance.

Online Opening of Technical Bid (if Possible) 25-05-2026 at 10.00 Hours IST onwards

Online Opening of Price Bid of the 26-05-2026 at10.00 Hours IST onwards

Qualified Bidder (if possible)

Add. City Engineer

Drainage–Project, Bedi Naka,

Nr. Keshar E Hind Bridge, Central Zone

Rajkot Municipal Corporation

Sign and Stamp of Contractor Page 1 of

Sr. No. Content

1 FORM OF PRICE PROPOSAL

2 SCHEDULES OF RATES & PRICES

3 SCHEDULE A - GRAND SUMMARY

4 SCHEDULE B - PAYMENT SCHEDULE

5 SCHEDULE C - BILL OF QUANTITIES (BOQ)

6 SCHEDULE D - BUY BACK

Sign and Stamp of Contractor Page 2 of

FORM OF PRICE PROPOSAL

Bidders are required to fill up all blank spaces in this Bid Form

Municipal Commissioner,

Rajkot Municipal Corporation,

Dr. Ambedkar Bhavan,

Dhebarbhai Road,

SUB:- Augmentation Work of Popatpara(Ronki) sewage Pumping Station with 02 Years Comprehensive

Operation and Maintenance.

We have examined the Conditions of Contract, Employer's Requirements, Schedules, Addenda Nos.

and the matters set out in the Appendix hereto. We have understood and checked these documents and have

not found any errors in them. We accordingly offer to design, execute commission and to maintain for the

two years the said Works and remedy any defects, fit for purpose in conformity with these documents and

the enclosed Proposal, for the fixed lump sum of Rs. Or other such sums as may be determined

in accordance with the terms and conditions of the Contract. The above amounts are in accordance with the

We agree to abide by this Bid until 180 days and it shall remain binding upon us and maybe accepted at any

time before that date. We acknowledge that the Appendix forms part of our Bid.

If our bid is accepted, we will provide the specified performance security, commence the Works as soon as

reasonably possible after receiving the Employer's Representative's notice to commence, and complete the

Works in accordance with the above-named documents within the time stated in the Appendix to Technical

Unless and until a formal Agreement is prepared and executed, this Bid, together with your written,

acceptance thereof, shall constitute a binding contract between us.

We understand that you are not bound to accept the lowest or any bid you may receive. We are, Gentlemen

Yours faithfully

Signature in the capacity of duly authorized to sign bids

for and on behalf of

Sign and Stamp of Contractor Page 3 of

Sign and Stamp of Contractor Page 4 of

RajkotMunicipalCorporation

Water O&M Cell (Drainage)

General terms, condition and detail of works:

1. EMD and Tender fees and other documents should be sent by Speed post to Office of the Dy.

Executive Engineer (Ele./Mech.), Drainage–Project, Bedi Naka, Nr. Keshar E Hind Bridge, Central

Zone, Rajkot Municipal Corporation, Rajkot-360001, on or before the prescribed date and time

mentioned in the milestone dates for e-Tendering.

2. No joint venture is permitted.

3. Conditional tender will not be accepted and no advance payment against the tender will be

made by department.

4. The rate should be clearly quoted in figure and words in online price bid only. The rates

quoted in any other manner will not be acceptable.

5. The rate should be Exclusive of GST and all other taxes & duties i.e. transportation charges

etc are inclusive.

6. Tender should be submitted along with relevant documents asked in tender. Tender without

any document will liable to reject.

7. Time for completion of SITC work is 06 Months from the date of work order. All erection,

installation, testing and commissioning of all materials should be completed in 06 months. In

case of late handing over, penalty will be imposed on tenderer as per RMC rules.

8. Contractor shall guarantee the work for a period of 24 months from the date of issue of SITC

Completion Certificate.

9. Tender should be completely filled in all respects, incomplete tenders are liable to reject.

10. The bidder shall have to identify various risks involved in this work and shall accordingly

frame the methodology for constricting the same.

Rates and prices received in any other formats will be rejected and the Bids will be

12. It will be entirely at the discretion of the Owner to accept or reject the bidder’s proposal,

without giving any reasons whatsoever.

Sign and Stamp of Contractor Page 5 of

schedule. Prices quoted in online Schedule only will be considered for price evaluation &

shall form apart of the Contract Agreement.

15. The bidder shall be deemed to have allowed in his price for provision, maintenance and final

removal of all temporary works of whatsoever nature required for construction including

temporary bunds, diverting water, pumping, dewatering etc. for the proper execution of

works. The rates shall also be deemed to include any works and setting out that maybe

required to be carried out for laying out of all the works involved.

16. Where there is a discrepancy between the unit rates and the amount entered, in the price

schedule the latter shall govern.

Specifications and other sections of these bid documents and these documents are to be taken

as mutually explanatory of one another.

18. Prices quoted by the bidder shall be firm for the entire period of Contract without any

19. The bidder shall interpret the data furnished and carryout any additional survey work, or

investigation work required at his own cost.

20. The prices quoted shall also include the cost of materials utilized for testing.

21. The bidder should acquaint himself with the site conditions including the access to Work site.

The successful bidder shall have to make suitable access to worksites at his own cost. These

accesses will be used by the other Contractors working for RMC.

22. From each Running Account Bill, labour cess, Income Tax, Value Added Tax (VAT),

Professional Tax and other taxes prevailing from time to time will be deducted as per norms.

23. The contractor shall have to avail PF Code as per the prevailing Circular of Government for

the employees on work. The process for preparation of bill will be taken up only after

submission of the Challan for the amount of P.F. deposited every month for the employees

on work, which will binding to the contractor. The required documents shall have to be

submitted every month by the contractor to the competent authority.

24. The prices shall have to be quoted firm & fix including all the taxes & duties without any

statutory variation. RMC will not consider any statutory variation as well as the price rise in

the market and if any, those shall be on account of contractor

25. The work contract tax shall be borne by the agency.

Sign and Stamp of Contractor Page 6 of

26. The material / Items as supplied by the contractor and as found necessary by engineer-in-

charge will be inspected by Project Management (PMC) of this project.

27. The contractor shall have to borne all charges for testing and inspection purpose including

TPI agency charges. TPI agency charges will be born by contractor.

28. The contractor shall have to provide his own level instrument for this work.

29. In excavation, the decision regarding classification of strat a shall rest with the Engineer-In-

Charge and his decision in this regards shall be final and binding to the Contractor.

30. The rates of work are inclusive of shoring, strutting, dewatering etc. complete and hence no

any extra payment shall be made for the same.

31. During work activity, proper care must be taken for labour safety and all the provisions of the

labour laws must be followed by the contractor.

32. The G.A. Drawings provided with the tender document is only for reference. Contractor

(Agency) shall have to prepare GA drawing considering actual plot size and site situation and

GA drawings shall have to be approved from Engineer-in charge of Rajkot Municipal

Corporation and/or TPI Agency without any extra cost.

33. Incase of any ambiguity found in the tender or in the specifications/drawings etc., Engineer-

in-charge is empowered to take necessary decision for rectification and the same shall be

final and binding to the contractor.

34. Appendix provided in tender is a sample format. The bidder shall furnish the details of

concern tender duly signed by Chartered Accountant and Tenderer. List of Ongoing Work

(i.e. Running Work details) must be attached. Ongoing work list shall include details name of

work, total amount of awarded work, Work done amount till date, pending work today. In

work, total amount of awarded work, Work done amount till date, pending work today. In

this Appendix, the details of experience and amount shall have to be mentioned in the

respective column.

35. For any type of license regarding labour etc. has to be achieved by agency

36. This office Circular bearing Order are uploaded in tender document. The Contractors quoting

their rates shall have to read, implement, and submit the same duly signed along with the

documents to be submitted during physical submission.

37. In reference to the above Circular and Order cited at above, the Contractor firm who have

quoted their rates for this work will be called in person for verification of original documents.

The date and time for verification of original documents will be intimated to the Contractors.

Sign and Stamp of Contractor Page 7 of

38. Before procurement of Material the Quality Assurance Plan (QAP) shall be approved by

RMC. QAP for approval shall be submitted in 3 Original copy duly signed and stamped by

Manufacturer, Third Party Inspection Agency and Tenderer.

39. The Vendor Form provided in the tender document shall also have to be filled by the

contractor and submitted along with all other required documents during the physical

40. Any Finacial document i.e. FDR, Demand Draft etc. must be accompanied with the details

like; Name Address of Issuing Branch, Name and Address of Verifying Brach, Name &

Designation of Contact Person, Contact Number, e-mail address, Fax Number etc.

41. Necessary certificate / approval from PGVCL or electrical department or any other statutory

authority may be required is to be obtained and submitted by contractor. Necessary fees will

be paid by Contractor and no refund will be given to contractor by RMC, hence the charges

for the same should be included in tender by contractor.

42. Inspection: RMC will depute the representative of technical person (Elect. & Mech.) of

Rajkot Municipal Corporation & TPI for inspection at manufacturer site. After successful

inspection Contractor should inform RMC before dispatch of material. The bidder should

arrange for the inspection at his own cost.

43. Training: If Required RMC will depute the representative of technical person (Elect. &

Mech.) of Rajkot Municipal Corporation for Training. The bidder should arrange for the

44. The tender will be treated as no responsive if Tender in the name of firm or a person who is

not an approved manufacturer or Black Listed/Debar/ Terminated anywhere, in India by any

Govt. / Semi-Govt. Department.

45. Penalty: for late completion of work, penalty will be imposed as per RMC rules.

46. The contractor shall have to arrange all tools and tackles, consumable like; Kerosene, cotton

Waste, etc, and man power. No tools and man power will be provided by RMC.

47. Length of cable utilized will be measured and payment will be done on actual measurement

of cable utilized. Quantity of cables shown in price bid is approximately and it is only for

estimate purpose, but bidder must consider this quantity to quote the tender.

48. Extension of Delay: If work is delayed by force majeure like act of God, Serious loss or

Damage by fire, Strike, Bandh, curfew, Rally, Heavy rain, flood, cyclone, earth quake or any

natural calamities occurs, or any other cause which is beyond the control of contractor. In

such case, Engineer in charges will decide sympathetically to waive penalty.

49. Municipal Commissioner, Rajkot Municipal Corporation, reserves the right to Accept or

reject any or all the tender(s) without assigning any reason thereof.

Sign and Stamp of Contractor Page 8 of

50. Technical Bid will be opened on the prescribed date and time (if possible) in c/o Add. City

Engineer (W.M.U.), Central Zone, near S.T. Stand, Rajkot Municipal Corporation, Rajkot.

51. Rajkot Municipal Corporation will deploy own engineers, who will inspect all the material at

factory anywhere in India and will also supervise erection, testing and commissioning of the

52. Every document, each page of tender and copy of commissioner’s order must be duly signed.

53. All the drawings should be provided and Control Circuit Diagram of all panels should be

provided with Manuals (in soft copy & Hard copy both) and also take approval of TPI &

Rajkot Municipal Corporation.

54. If any necessary technical change required by competent authority or TPI in drawing,

tenderer will do that immediately and no any extra payment will be paid for the same.

55. For any legal matter only Rajkot jurisdiction will be considered.

56. If any necessary extra material or extra work will be need to done which is not including in

Tender/BOQ, then payment will be paid as per RMC/Government SOR. No tax or any + or –

rate of tender apply for this.

57. Tenderer should visit site for augmentation work and take actual measurement for cable, PDB

before quote the tender.

58. SITC Work has to be done to ensure that the routine pumping operation is not affected.

59. Bidder should supply Desktop 12th Gen Intel® Core™ i7-Processor, Ram-16-GB, SSD-512

GB, HDD-512 GB with printer & Scanner. (Make-Dell, Lenovo, Acer, HP) Bidder must

quote their prices including of this supply work

Signature and stamp of Contractor

Sign and Stamp of Contractor Page 9 of

:: SCHEDULE - A ::

BOQ & RATES FOR EACH AS PER SCHEDULE-B, ATTACHED IN SEPARATE FOLDER

(Exclusive GST)

Sr. Location of O & M Cost

Name Capital Cost Tender Amount

No Pumping Station (02 Years)

Popatpara(Ronki) sewage

pumping station

I/We agree to carry out the above work at % (in Fig.)

(in Words) equal/above/bellow the estimated cost.

Contractor shall have to quote the rates in the given online Price Bid only.

Sign and Stamp of Contractor Page 10 of

:: SCHEDULE - B ::

PAYMENT SCHEDULE

Schedule of Payment % Break-up of payment for each component of the Pumping Machinery

During Supply, Installation, Trial Run & Commissioning.

Sr. No. Break-Up

1 On supply of equipment at site after TPI approval 65%

2 On erection, testing and commissioning of equipment 25%

After satisfactory completion of SITC period + 30 Days Trial Run

Note:- Trial Run period of 30 Days is excluding of O&M period.

Schedule of Payment % Break-up of operation & Maintenance component of 2 Years.

%of quoted amount of

Respective Comprehensive

Sr. No. Break-up

1 Half I of each respective year 24%

2 Half r II of each respective year 24%

3 Half III of each respective year 24%

4 Half IV of each respective year 24%

On handing over the plant/pumping station to owner 04%

 As per above a total of 4% of each year of Comprehensive Maintenance shall be retained by client &

shall be released at the end of comprehensive maintenance period and handing over the plant /

pumping station to owner / client.

 Any other items not specified above but considered necessary for completion of work to the

satisfaction of Engineer-in-charge and efficient operation of the plant / PS.

 After commissioning the plant / pumping station, comprehensive maintenance shall be the

responsibility of the Contractor to run Plant/pumping station for 2-years (24 months) period and

after that plant/pumping station should be handed over to the Client (RMC).

Sign and Stamp of Contractor Page 11 of

 In Comprehensive Operation & Maintenance work, all tender items that a replaced or installed by the

contractor shall remain the contractor’s responsibility to insure successful operation and repairing for

a period of two years. Other than this equipments/machinery related repairing responsibility shall lie

Add. City Engineer

Water Management Unit

Rajkot Municipal Corporation

Sign and Stamp of Contractor Page 12 of

:: SCHEDULE - C ::

BILL OF QUANTITIES (BOQ)

(BOQ & RATES WITH COST SUMMARY FOR THE WDS ATTACHED SEPARATELY)

RAJKOT MUNICIPAL CORPORATION

WATER MANAGEMENT UNIT- Water O&M cell (Dainage)

Augmentation work of Popatpra(Ronki) sewage pumping station with 2 year comprehensive operation

and maintenance .

Mechanical Work

Sr.No Description of Item Qty Unit Rate Amount

Supply of Submersible non clog Pump set of

approved make of required capacity and head

with suitable motor working on 3-phase, 50 Hz,

+/- 3% 415V +/- 10% and as per relevent IS and

following material of construction and Spe

with 3 core flat copper cable from pump to

starter panel with cable end

Material Of Construction:

Impeller : SS:CF8M; Casing(Volute) : C.I., Shaft:

AISI SS410, Wearing Ring :

Item Bearing/ Thrust Bearing: Bearing Life L10(min

Shut Off head: More than 120% of rated duty

Discharge : 600 m³/hr.

Min. Efficiency(Duty point) :70.5% included with

PMU,Autocoupling with Integral Bend

(With Autocoupling PIN)+ Foundation

bolt; (Each), Double SS Guide pipe of suitable

size & SS Gr.80 lifting chain with hook for Lifting

and lowering of pump(As per site requirement)

Sign and Stamp of Contractor Page 13 of

Supply, installation, testing & commissioning of

sewage submersible, non clog type suitable for

working on three phase, 50 Hz ± 3%,

415 V ± 10%, AC supply, 1450 RPM synchronous

speed with 3 core flat copper cable from pump to

starter panel with cable end

terminations, all supports, clamps, pipe fittings

along with mechanical seal, bearing bush, strainer

etc. complete set & following M.O.C:

Casing: CI, Impeller: SS CF8M, Wearing ring &

Bearing bush: Bronze, TC mechanical seal, CS / SS

Item bearing, SS shaft with sleeve, SS

2.0 strainer & MS motor body.

Discharge : 260 m³/hr.

Min. Efficiency(Duty point) :70.5% included with

PMU,Autocoupling with Integral Bend

(With Autocoupling PIN)+ Foundation+Duck foot

bolt; (Each), Double SS Guide pipe of suitable size

& SS Gr.80 lifting chain with hook for Lifting and

lowering of pump(At Mansarovar P.st-As per site

Supply, installation, testing & commissioning of

sewage submersible, non clog type suitable for

working on three phase, 50 Hz ± 3%,415 V ± 10%,

AC supply, 1450 RPM synchronous speed with

core flat copper cable from pump to starter panel

with cable endterminations, all supports, clamps,

pipe fittings along with mechanical seal, bearing

bush, strainer etc. complete set & following

M.O.C:Casing: CI, Impeller: SS CF8M, Wearing ring

& Bearing bush: Bronze, TC mechanical seal, CS / 2 Nos

SS bearing, SS shaft with sleeve, SSstrainer & MS

motor body.Discharge : 200 m³/hr.Head :

mtr.Min. Efficiency(Duty point) :70.5% included

with PMU,Autocoupling with Integral Bend(With

Autocoupling PIN)+ Foundation+Duck foot

bendbolt; (Each), Double SS Guide pipe of suitable

size & SS Gr.80 lifting chain with hook for Lifting

and lowering of pump(At Lalpari P.st-As per site

M.S. Specials Flanged ends (10mm thick ) 300 Kgs.

Manufacture, Supply & Delivery of Ductile Iron

Flange socket spigot bends, tees, reducers or any

Item other specials as per BS-EN-545/1995 Class-A

3.2 series K12 suitable for use with D.I. Pipes

manufactured as per 15:8329/1994delivery of

specials is to be made to GWSSB store or site of

Sign and Stamp of Contractor Page 14 of

works any where in Gujarat including all taxes,

loading, unloading. carling, stacking, Insurance,

Inspection charges, octroi etc. complete.

Item TEE 600MM *300MM PN 1.6 (5 Nos)

Item BEND 90* PN 1.6 - 300MM (5 Nos)

Item BEND 90* PN 1.6 -600MM (1 Nos)

Item DOUBLE FLANGED BARREL PIESE -300 MM (As Per

4.0 Requirement of site condition)

Item DOUBLE FLANGED BARREL PIESE -600 MM (As Per

4.1 Requirement of site condition)

Providing and supplying D. I. K-9 grade Dual

Flange ended pipes for following nominal bore

diameter with internal cement mortar lining

including all taxes, insurance, transportation,

freight charges, octroi, Inspection charges,

loading, unloading, conveyance to departmental

stores, stacking etc, complete. (IS 8329-2000).

Rate for Di pipe based on Wholesale Price Index

of Pig tran as 149.2 for the month of Jan-2022.

For sewerage project cement mortar lining shall

be with sulphate resistance cement

Item 300 mm DI K-9 pipe Double Flanged

5.1 (For Discharge Line)

Reflux valve (Non Return Valve)

a) Providing and supplying single plate reflux

Valve of approved make & confirming to API-

594/598 IS 5312 with IS mark and of following

class and diameter; including all taxes, octroi,

inspection charges, freight charges, insurance,

Item loading, unloading, conveyance to departmental

6.0 stores, stacking etc. complete; and -

b) Lowering, laying and jointing in position

including cost of all labour, jointing material,

including nut bolts and giving satisfactory

hydraulic testing, etc. complete as per Tender

Specifications and instructions of Engineer in

Item 300 mm dia Reflux valve PN 1.6(For Decharge

Knife Gate Valve, (Two side sealing) assy FG

Resilient Seated Knife Gate

Item Valve of , Manually and With electric actuator

6.2 Geared Operated, Bonnet-less

Design, Suitable for

Uni-directional flow

application. (For Decharge line)

As Above 300mm (For Discharge line) (Manually) 5 No. 66,740.00

Sign and Stamp of Contractor Page 15 of

Item As Above 600mm (For Header line) (With electric

SS Expansion Bellows

a) Providing and supplying corrugated design

stainless steel Expansion bellows with flanges,

15mm axial movement, 300mm overall length

with tie rods, nuts etc. of following class and

diameter; including all taxes, octroi, inspection

Item charges, freight charges, insurance, loading,

7.2 unloading, conveyance to departmental stores,

stacking etc. complete Tender Specifications; and

b) Lowering, laying and jointing in position

including cost of all labour, jointing material,

including nut bolts and giving satisfactory

hydraulic testing, etc. complete as per

instructions of Engineer in charge.

Item SS Expansion Bellows - As Above for 300mm (For

8.0 Discharge line)

Item SS Expansion Bellows - As Above for 600mm (For

9.0 Header line)

Item C.I. KINETIC (DK Type) Air Valve with IS-14845

10.0 150mm Dia. Foe header main line

S.I.T.C. of bourdon type glycerine filled 150 mm

Ø Pressure Guage complete with syphon tube

with isolating cock having range of 0 to 14 kg/cm2 6 Nos.

as per IS:8793.

(For Discharge + Common Header)

SITC of 600 mm Full Bore Electro-magnetic Flow

meter (for Common Header)

Providing, supply, installation, teasting and

commissioning of Full Bore Electromagnetic flow

meter with factory callbrated, IP-68, Battery

operated, flanged connection, Flow sensor,

Indicator, transmitter and totaliser with all

accessories viz. power and Control cables upto

starter panel, cabinets, hardwares, etc completed

as per following specifications:

a) Flow Sensor: neoprence/Polyurethene llning. 1 No.

DC pulsed, ss 316 electrodeds, CS / SS

flanges, Fully welded / SS 304 sensor construction

b) Flow transmitter / converter: Microprocessor

based/Modular design/HART type 2 line back lit

LCD for indication of actual flow rate, forward,

reverse, sum totallser display, One current(4-

20mA)/one scalable pulse / one statkus output, IP

67, Die cast alluminium with PU finish with glass

window enclousre, 25 metres length sensor cable

S.I.T.C. of Single girder type fully electrically 1 No.

operated EOT crane with electricallly operated

hoist , suitable for outdoor applicationclass II duty

geared travellying trolly with lift(6-10m) , span(9-

12m)complete with long travel rail track (40 mm

Sign and Stamp of Contractor Page 16 of

sq.bar) moving or cross girder, all three motions

electrically operated by suitable rating motor IP

54, control panel & down pendant control block,

brake , safety device, cable from motor to starter

pannel & other required accessories & tested to

50% overload etc. comp. as per site requirement

S.I.T.C. of Hand operated HOT with travelling 1 No. 13,750.00

trolly - 1 T capacity

(SS Chain As per site requirement )

supporting structure / and all type of fabrication

(MS Plate, channels, Angle, girder etc.) As per site 15000 Kgs.

Item Aluminum Foldable Expanded ladder Capacity

Horizontal Portable non clog dewatering

Capacity : 50 m3 / hr. Head : 17 m Motor Rating:

Mini. 5.5kw (7.5HP)

The scope includes design, supply installation

testing & commissioning of submersible Portable

Item non clog dewatering pump set with necessary

17.0 accessories starter panel, cable up to starter

panel, cable with necessary safety features ,cable

termination / junction box ,PVC delivery pipe min

30mtr, non-return valve, PVC flex. Pipe, lifting

chain, pump stool, fittings, hardwares each pump

etc. The pumps shall have auto start / stop

MISCELLANEOUS WORK

Item Dismantling existing Electrical-mechanical

18.0 equipments like pump-motor sets, Electric motors

& all electrical cables, drain pump sets, valves,

LEVEL MEASURING SYSTEM

Supply, installation, testing and commissioning Meas. 1 nos

19.0 Range: upto 10 mtr. For wet well

Item SS 304 - Lifting chain with "O" Ring @ 2 m & with

20.0 D/Bow Shackle @ 1 End

Furniture ( Table-02 Nos. , Chair-04 Nos. , Kabaat-1 ) 1 Job

Total Mechanical Works

Sign and Stamp of Contractor Page 17 of

RAJKOT MUNICIPAL CORPORATION

WATER MANAGEMENT UNIT- Water O&M cell (Drainage)

Augmentation work of Popatpra(Ronki) sewage pumping station with 2 year comprehensive operation

and maintenance .

ELECTRICAL COSTING

Sr.No Description of Item Qty Unit Rate Amount

1.0 H.T. INDOOR SWITCH GEAR PANEL

SITC of 11 kV, 500-MVA, 630A 1-Incomer & 2-

Outgoing Tr. feeder, indoor, draw out type HT

Vacuum Circuit Breaker Panel complete in all

respects as per IS, tender Specification

supplying rubber matting of 3mm thickness as per

tender specification

2.0 H.V. CABLES

SITC of 3C x 95 sq.mm. XLPE (E) 11 kV armoured

2.1 Aluminium H.V Cable including all accessories, 100 Mtr 1357

supports, etc. as per IS and tender Specification.

SITC of the Heat shrinkable type Outdoor

2.2 H.T.cable end terminations suitable for 11 kV, 3C 1 Nos 14,467

x 185 sq.mm. XLPE (UE) armoured cable.

SITC of the Heat shrinkable type Indoor H.T.cable

2.3 end terminations suitable for 11 kV, 3C x 185 5 Nos 7,925

sq.mm. XLPE (UE) armoured cable.

providing and fixing printed instruction chart both

in gujarati and english as per tender specifications

SITC of fire bucket round bottom of 9-litres

capacity made out of 24-guage G.I. sheet with

3.2 extra handle at bottom duly painted white inside 4 Nos 212

and red outside with fire mark, filled with dry

SITC of floor mounting stand for keeping four nos

of fire buckets comprising 1500 mm in length,

mm heights frame made out of 30mm X 30mm X

3.3 4mm angle iron with cross supports for legs, 1 Nos 933

welded with 4 hooks and duly painted with one

coat of red lead and two coats of approved

enamelled silver paint.

SITC of 320-KVA DG set as per tender

LOW VOLTAGE (LT) PANEL BOARD

(PMCC) : SITC of PMCC Panel (50kA),

5.0 compartmentalized, floor mounted, as per Tender

Specification / IS and including following as

Sign and Stamp of Contractor Page 18 of

INCOMER 1-2 & DG(3-Nos ACB) : FP, 800 A,

50 KA Microprocessor EDO ACB

5.2 No load Compansation 25 KVAR bank 2 Nos 13,286

SOFT STARTER FOR 75 KW Motor : 5 NOS:

(3-working + 2-stand by)

5.4 250-Amp, 4 Pole, Air Break Fixed MCCB 1 Nos 43,183

4 Pole, Air Break Fixed MCCB (63-Amp 2-Nos,

32-Amp 2-Nos, 16-Amp 2- Nos)

Supply, laying, testing & commissioning of

APFC Panel of 100-KVAR

LOW VOLTAGE (LT) CABLES :-Supply,

laying, testing & commissioning of 1.1 kV

grade, XLPE insulated (IS 7098) Copper/Alu

conductor cables as per tender specification & IS.

3.5C x 240 sq. mm. 1.1 kv grade A2XWY Alu.

Cable (2 run from DG to PMCC Panel )

3.5C x 185 sq. mm. 1.1 kv grade A2XWY Alu.

6.2 Cable (2 run from Transformer to PMCC Panel for 160 Mtr

3.5 C x 35 sq. mm. 2XFY Copper Cable (1 run

6.3 from 75-kw starter panel to wet well Junction 300 Mtr.

Box for each motor )

4 C x 2.5 sq. mm. 2XWY Copper Cable (1 run

6.4 from starter panel to wet well Junction Box 300 Mtr.

for each motor remote operation )

8 C x 2.5 sq. mm. 2XWY Copper Flexible

Cable (2 run from starter panel to wet well

6.5 Junction Box for each motor control/protection)(2 700 Mtr.

run from VCB panel to Transformer

control/protection)

7.0 METALLIC ENCLOSURE (5-Nos)

Providing & erecting weather proof, dust &

vermin proof, MS Stand mounted front operated Sq.

outdoor type double door cubical switchgear mtr

enclosure as per tender specificatons.

Supplying and erecting triple pole & neutral

440V Panel mounting Copper Busbars

with necessary connections As per tender

CABLE END TERMINATION AND

CONNECTION: SITC of Double compression

brass cable glands and crimping type Bimetalic

lugs / sockets with necessary tools and

equipments as specified in specifications and

Sign and Stamp of Contractor Page 19 of

Double Compression Brass Cable Glands for

Double Compression Brass Cable Glands for

Double Compression Brass Cable Glands for 35 sq

Double Compression Brass Cable Glands for 2.5 sq

8.5 240 sq.mm copper long barrel heavy duty lugs. 12 Nos 135

8.6 185 sq.mm copper long barrel heavy duty lugs. 24 Nos 121

8.7 120 sq.mm copper long barrel heavy duty lugs. 4 Nos 56

8.8 95 sq.mm copper long barrel heavy duty lugs. 8 Nos 47

8.9 35 sq.mm copper long barrel heavy duty lugs. 40 Nos 22

SITC of Chemical type bore earthing, IS 3043-

1947 Rated earth electrode & 50 kg. Chemical

bag.(DG,VCB,PMCC,Junction Box) as per tender

Supply & Erection HOT Deep GI earthing strip

9.2 for T/R, DG, PMCC, Junction Box As per tender 70 kg 77.00

Supply & Erection Copper earthing strip for

VCB, DG, T/R As per tender specification

CABLE TRAY :- Supply & laying GI perforated C

type cable trays including accessories & as per

tender specification and instruction of Engineer-

Supply & laying 450(W) x 50(H) x 2.0 mm thick GI

perforated C type cable trays

Supply & laying 300(W) x 50(H) x 2.0 mm thick GI

perforated C type cable trays

Supply & laying 200(W) x 50(H) x 2.0 mm thick GI

perforated C type cable trays

Supply & laying 150(W) x 50(H) x 2.0 mm thick GI

perforated C type cable trays

Sign and Stamp of Contractor Page 20 of

11.0 ELECTRIC WIRING-LIGHTING

SITC Point wiring for light, fan, bell with all

accessories as per tender specification

SITC Point wiring for on board looped plug for 6-

11.2 Amp with all accessories as per tender 4 point 66

SITC Point wiring for on board looped plug for 16-

11.3 Amp with all accessories as per tender 4 point 162

SITC 2 wire 2.5 sqmm Mains with all accessories

as per tender specification

SITC 40-W Indoor LED tube Lights with all

accessories as per tender specification

SITC 60-W Outdoor LED street Lights with all

accessories as per tender specification

SITC 90-W Outdoor LED flood Lights with all

accessories as per tender specification

SITC of celing fan having 1200 mm blades with all

accessories as per tender specification

SITC of Industrial Exhaust fan having 450 mm dia,

11.9 1400 mm RPM with all accessories as per tender 6 Nos 2459

Liaisons fees for preparing necessary

12.0 documents and drawing with getting NOC from 1 job 8000

PGVCL/ELE. INSPECTOR.

Total Mechanical Works

Sign and Stamp of Contractor Page 21 of

RAJKOT MUNICIPAL CORPORATION

WATER MANAGEMENT UNIT- Water O&M cell (Drainage)

Augmentation work of Popatpara(Ronki) sewage pumping station with 2 year comprehensive

operation and maintenance.

CIVIL WORKS (Panel & VCB Room and Miscellaneous work)

QTY. Item Rate Unit Amount

1 140.00 Excavation of Foundation in Soft/Hard 137.00 Cu. Mt.

Murrum, Soil or Sand from 0.0 mtr. to

1.50 mtr depth including dewatering with

lifting and laying in RMC limit as

2 40.00 Excavation of Foundation in Hard Murrum 159.00 Cu. Mt.

from 1.51 mtr. to 3.0 mtr depth including

dewatering with lifting and laying in RMC

limit as instructed

3 80.00 Excavation of Foundation in Soft 534.00 Cu. Mt.

Rock/Hard Rock from 1.51 mtr. to 3.0 mtr

depth including dewatering with lifting

and laying in RMC limit as instructed

4 16.00 Foundation filling with CC work in 4626.00 Cu. Mt.

proportion of 1:2:4 using 1.5 cm to 2.0 cm

aggregate including Raming, Curing etc.

5 40.00 CC work M-25 for RCC footing using 5620.00 Cu. Mt.

aggregate of size 10-20 mm, centring,

curing, finishing etc. complete (without

6 23.00 CC work M-25 for Column using aggregate 6550.00 Cu. Mt.

of size 10-20 mm, centring, curing,

finishing etc. complete (without

7 62.00 Brick Masonry work in Cement:Mortar 1:6 5761.00 Cu. Mt.

8 20.00 CC work M-25 for Beam using aggregate 6250.00 Cu. Mt.

of size 10-20 mm, centring, curing,

finishing etc. complete (without

Sign and Stamp of Contractor Page 22 of

9 120.00 Filling of Plinth with using excavated 185.00 Cu. Mt.

usefull material partly and remaining

murrum to be brought from out side in

layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc.

10 19200.00 Supplying, Cutting, Beding, Binding and 65.00 Kg.

Hooking and binding with

wire for RCC work Tor steel TMT round

bar including all cost

11 66.00 CC work M25 for RCC slab using aggregate 6150.00 Cu. Mt.

of size 10-20 mm, centring, curing,

finishing etc. complete (without

12 2.00 CC work M-25 for Chhajja using aggregate 5861.00 Cu. Mt.

of size 10-20 mm, centring, curing,

finishing etc. complete (without

13 2.00 CC work M-25 for Lintel using aggregate of 6000.00 Cu. Mt.

size 10-20 mm, centring, curing, finishing

etc. complete (without reinforcement)

14 10.00 CC work 1:2:4 for RCC slab using 5535.00 Cu. Mt.

aggregate of size 10-20 mm, centring,

curing, finishing etc. complete (without

15 430.00 Cement Plaster 12 mm thick using 223.00 Sq. Mt.

Cement:Mortar in proportion 1:3

with Niru Finishing curing, etc. Complete

16 410.00 20mm thick Sand Face Cement Plaster 263.00 Sq. Mt.

Work in which 1 paster in

proportion of 1:3 and 2nd plaster inteh

proportion of 1:2 using

Cement:Mortar with spong finishing etc.

17 120.00 Supply & Fixing of Broken Glazed (China 306.00 Sq. Mt.

Mosaic) tiles size 5-6 mm thick of different

size and shade (approved crazy patern) in

Cement:Mortar 1:2 and joint filling with

White Cement / Coloured Cement

including Ramping, Watering, Curing etc.

18 430.00 Plastic Imulsion Paint (Two coats) (Asian 145.00 Sq. Mt.

Paint, ICI, Dulux, Nerolac, Berger etc. of

approved type) (with Prime Coat)

Sign and Stamp of Contractor Page 23 of

19 410.00 Apex Color work on Outer side of Wall 115.00 Sq. Mt.

(Two coats) (with Base

20 20.00 Cement Concrete flooring (IPS) 50 mm 338.00 Sq. Mt.

thick in proportion of 1:2:4

with a floating coat of neat cement,

finishing, curing etc. Complete

21 110.00 Supply, Fixing & Polishing of Kota Stone 913.00 Sq. Mt.

work thickness 20-25

mm to be fixed in Lime:Mortar 1:2 and

liquid Cement and as

22 25.00 Providing & fixing approved quality & 2376.00 Sq. Mt.

designed rolling shutterswith necessary

top cover, fittings, single coat red lead,

double coatsilver or oil paint (with

23 90.00 Enemal painting on door/window, iron 125.00 Sq. Mt.

door, iron grill or woodwork

24 1950.00 Iron work as per drawing and instruction 109.00 Kg.

25 50.00 Cement, lodhiya work with neat cement 26.00 Rmt.

slurry finishing.

26 60.00 Rigid P.V.C. Pipe ISI Marked of 6 kg/sq.cm. 250.00 Rmt.

Pressure, required with coupler, only

supplies work.for pipe of 110 m.m.outer

27 60.00 Rigid PVC Pipe 4 to 6 kg/sq.cm pressure. 12.00 Rmt.

With the necessary fittings of it. The

required solvent to be joined with

cement. (Only labour work).for pipe of

110 m.m. outer dia.

28 25.00 Foundation filling with Rubble Cement 1667.00 Cu. Mt.

Mortar in proportion of 1:6

29 12.00 Rubble Plinth massonary work in 1425.00 Cu. Mt.

Cement:Mortar in proportion of

1:6 with Brick Massonary Or Rubble

propoproportion of 1:3 without C.Pointing

30 3.00 Providing & fixing FRP door. 4200.00 Sq. Mt.

31 130.00 Removal of Excavated Stuff and laying 171.00 Rmt.

within RMC limit as

directed by Engineer-in-Charge

Sign and Stamp of Contractor Page 24 of

32 10.00 CC work M-25 for Partition, Parsdment, 7150.00 Rmt.

railling etc.using aggregate of size 10-20

mm, centring, curing, finishing etc.

complete (without

33 250.00 Supplying and fixing of chain link jali 450.00 Sq.M.

50x50x8g (including cost of

reveting,bolting, screw, nut etc. complete

34 18.00 aluminium section window work (with 3 7061.00 Sq.M.

track mosquito net )

(jindal)(with necessary all fittings)

Total civil work

Note:- All the BOQ item should be as per tender specification so bidder should refer to tender Vol II

for detail Specifications.

Add. City Engineer

Water Management Unit

Rajkot Municipal Corporation

Sign and Stamp of Contractor Page 25 of