PROVN OF CERTAIN SANCTION WORKS AT VSN CHILODA UNDER GE (AF) CHILODA

Amount

M & L for 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed.

M&L for mild steel Framed brackets & similar work of angles, flat iron or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, fixing with holdfast complete as necessary conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

S & F universal type hook for fire extinguisher of capacity 15 kg with screws and rings fixed to plate complete all as specified and directed.

S & F universal type hook for fire extinguisher of capacity 10 kg with screws and rings fixed to plate complete all as specified and directed.

S & F Acrylic Sheet of 300mmx250mm with background colour of white and writing instruction on each plate in Hindi and English of total words not exceeding 400 Nos. in red as per sample approved by GE.

S & F Acrylic Sheet of 100mmx300mm with background colour of white and writing instruction on each plate in English of total words not exceeding 10 Nos. in red as per sample approved by GE.

S & F Anchor and fastners size dia 12 mm ,length 100 mm complete all as specified and directed.

Excavating in post holes ( or similar holes ) n.exc 0.5 cum getting out , returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft loose soil complete all as specified and directed by Engr in Charge.

M&L for providing cement concrete 1:2:4, type B2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr in Charge.

S&F steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded suare or round tubes conforming to IS 1161-1979 grade St- 240 complete all as specified and directed .

S&F for mild steel plates (plain or chequered) of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed .

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E-165) complete all as specified and directed.

S&F for Roof tiles Mangalore pattern of any shape and size with grey cement and pigment ,interlocking at side joints, laid dry complete all as specified and directed by Engr in Charge.

S&F for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engr in Charge.

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge.

S&F false ceiling with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edge GRG false ceiling tiles at all heights with GRG ( Glass reinforced gypsum ) false ceiling tiles of size 595 x 595 mm of approved texture, designs and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRCO .5 to .75 as per IS 8225:1987 non combustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

S&F Framed work such as grills, gratings, cooler stand etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Surfaces excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed by Engr in Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr in Charge.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with 8 to 10 ton roller compacted complete all as specified and directed by Engr in Charge.

M & L for Hardcore of gauge n exc. 63 mm, broken bricks deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr in Charge.

M & L for Plain Cement concrete in foundations, filling and mass concrete, Type D-2, 1:4:8 (40mm graded ggregate) complete all as specified and directed by Engr in Charge.

M & L 25mm thick Sand filling under floors or in foundations including watering and solidation, laid dry over PCC laying interlocking tiles complete all as specified and directed.

M&L for outdoor coloured vitrified paving tiles/ rubber moulded digital chequered tile joint free edge cut of size 40cm x 40cm of 10 to 12 mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 25 mm thick screed bed or bedding layer in cement mortar 1:6 complete to match the tiles complete all as specified and directed by Engr in Charge.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shape of pawer block complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block of approved shape and size 80mm thickness, with minimum compressive strength of 40 N/Sqmm (M-40 Grade) without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with white cement and pigment laid over , confirming to IS 15658-2006 complete all as specified and directed.

Material & Labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making rainage opening wherever required complete all as specified and directed by Engr in charge.

Excavation over areas n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes etc and getting out in Soft / loose soil complete all as specified and directed.

Excavation over areas for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes etc exc 1.50m and n exc 3.00m in depth and getting out in Soft / loss soil complete all as specified and directed.

Excavation over areas for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes etc exc 3.00m and n exc 4.50m in depth and getting out in Soft / loss soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished surfaces complete all as specified and directed.

M & L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter on curved surfaces complete all as specified and directed.

M&L for RCC M-25 (20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (20 mm graded aggregate) as in Walls, retaining walls, basement walls,base slab, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

All as per item No 36 here in before but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders dia complete all as specified directed by Engineer-in-Charge.

M & L for Rough excavation not exceeding 1.5 m deep and getting out Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in soft loose soil complete all as specified and directed.

Material and Labour for 75mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layer in cement mortar 1:4 for floor finishes with WPC compund @ 3% wt of cement complete all as specified and directed. Note:- WPC to be measured and paid seperately

Material and labour for 10mm thick rendering/ backing coat or bedding layer in cement mortar 1:4 for over concrete wall surfaces for fixing of tiles complete all as specified and directed.

Supply and fix designer Italian glass mosic of size 20mm x 20mm x 4mm thick of approved colour / pattern / designed over screed bed / backing coat surfaces , curved or straight with epoxy chemical adhesive as per manufacturer recommendation complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

Supply and fix 24 mm dia mild steel blots, purpose made with hexagonal or square head one end and screwed for other , or screwed for both ends, each screwed to be fitted with washer and one hexagonal or square length not exc 300mm long complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floor, mass concrete or similar work Including necessary formwork complete all as specified and and directed.

M&L for preparation of new wall/concrete surfaces over 10cm width or Sqm girth not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. n exc 10 sq m on plan and getting out in Hard / Dense Soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed by Engr-in-Charge.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed .

M&L for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr-in-Charge.

M&L for RCC nominal mix using 20 mm aggregates in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M&L for Form work to sides and soffits of floor or roof beams, lintels, cantilevers plinth beams;and similar work; vertical or to batter pillars etc complete all as specified and directed by Engr-in-Charge.

M&L for RCC nominal mix using 20 mm aggregates in beams, cantilevers, lintels over 1.5 M span complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:3:6) type C1 using 20 mm graded aggregate as in copings, including necessary form work complete all as specified and as directed.

M&L for Mild steel, plain, black sheet of 1.0 mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required welding with frame complete all as specified and as directed by Engineer-in-Charge.

M & L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete all as specified and directed by Engineer-in-charge.

S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed.

Provision of roller and sliding channel for sensor door including following details:- (a) Sliding Channel for 12mm thick toughned glass door of length n exc. 3.50 m for auto sliding door including servicing all as per directed by Engr-In-Charge (b) Big Roller set (Qty -4 Each) (c) F seal (Qty - 2 shutter) (d) Floor Guide for automatic sensor door (Qty- 2 Each) (e) Roller Clamp Set (Qty- 4 Each)

Provision of roller and sliding channel for sensor door including following details:- (a) Sliding Channel for 12mm thick toughned glass door of length n exc. 3.50 m for manual sliding door including servicing all as per directed by Engr-In-Charge (b) Big Roller set (Qty -4 Each) (c) F seal (Qty - 2 shutter ) (d) Floor Guide for manual door (Qty- 2 Each) (e) Glass handle (01 Each)

Abhishek Enterprises (BID ID -3159645)

Haritwal traders (BID ID -3156856)

divyarsh entrprise (BID ID -3156330)

Shreeganesh Construction (BID ID -3157641)

ARTI CONSTRUCTION (BID ID -3159695)

Indice Technologies (BID ID -3158858)

Ramdev and Sons (BID ID -3160155)

UMIYA BUILDCON (BID ID -3159565)