SPECIAL REPAIR TO BLDG NO P 520 AT CTW CME KIRKEE

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in sub base of floors 75mm thick all as specified and directed.

M & L for cement concrete (1:2:4) type B1, (using 20mm graded stone aggregate) in sub base of floors 25 mm thick mixed with WPC all as specified and directed. (Note : Water proofing compound will be measured and paid separately)

M & L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid to slope of (1:12) and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing to store and rubbish off the premises complete.

M & L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) in floors ,polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match the shade laid over and including15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) in vertical surfaces such as skinrtings, dado, polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match the shade, fixed over and including 15mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M & L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeing 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed

S & F Glazed ceramic coloured tiles in verticle surfaces of size 350x250x7mm thick fixed over and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M & L for block masonry with solid block of precast cement concrete class designation C-5 (using 20mm graded stone aggregate), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

Labour only for block masonry using solid blocks and setting in M&L for cement mortar (1:6) complete all as specified and as directed. Note: Old serviceable PCC block retrieved from item No 10 above will be reused.

Dismantling stone slabs / tile of any description & thickness laid bedded & pointed in cement mortar in floors etc and removal of debris (except stone slab) out of MD land complete all as specified and as directed.

M & L for machine cut and polished kota stone slab flooring 20-25mm thick laid over cement screed base and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for machine cut and polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar fixed over and including backing coat 10mm thick in cement mortar in CM (1:4) and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 20 mm thick granite work fixed over and including 15 mm thick cement mortar (1:4) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for machine cut cudappah stone slab 20-25mm thick fixed over and including cement screed base 15mm thick in CM (1:4) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water and removal of debris out of MD land complete all as specified and as directed.

M & L for 10 mm thick rendering in CM (1:6) on stone masonry surfaces finished even and smooth (without using extra cement) over and including dubbing coat 10mm thick in CM (1:6) complete all as specified and as directed. Note: Dubbing coat shall be executed on order of GE in writing.

M & L for rendering 15mm thick on other than fair face of brick/ stone masonry/concrete surface in CM (1:4) finished even and smooth mixed with WPC as per manufactures instruction over and including 10 mm thick dubbing coat in CM (1:4) complete all as specified and as directed. Note: 1) WPC shall be measured and paid separately. 2) Note: Dubbing coat shall be executed on order of GE in writing.

M & L for 5mm thick rendering in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of primer on wall over and including layer of 3mm thick wall care putty complete all as specified and as directed.

M & L preperation of newly plastered or previously untreated surfaces of wall and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algae paint over one coat of primer all as specified and directed.

M & L for preparation of newly plastered ceiling surface and applying two coats oil bound distemper over a coat of primer on wall over and including layer of 3mm thick wall care putty complete all as specified and as directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of oil bound distemper on wall with 3mm thin layer of wall care putty (in two layers) including one coat of chalk whiting complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of oil bound distemper on ceiling including thin layer of wall care putty (in two layers) including one coat of chalk whiting complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of white wash on wall surface complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of white wash on ceiling surface complete all as specified and directed.

M & L for complete removal of existing treatment and preparation of wall surfaces (plastered/unplastered ) and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algae paint over one coat of primer as per manufacturer instruction complete all as specified and directed.

M & L for two coats of synthetic enamel paint over coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M & L for two coats of synthetic enamel paint over coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

M & L for preparation of new steel surface of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-Charge.

M & L for preparation of old steel surface of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing and connnections, including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge.

Taking up or down 32 mm bore steel tubing and connnections, including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge.

S & F galvanised steel tubes 15mm bore, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed by Engineer-in-Charge.

S & F galvanised steel tubes 20mm bore, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed by Engineer-in-Charge.

Fixing only 15 mm bore steel tubing and connections in new or old position (walls,ceiling,floors,etc) including new fittings such as bends, tees, etc all as specified and directed by Engineer-in-Charge. Note: Serviceable GI tube retrieved under item No 38 shall be used for fixing.

Fixing only 20 mm bore steel tubing and connections in new or old position (walls,ceiling,floors,etc) including new fittings such as bends, tees, etc all as specified and directed by Engineer-in-Charge. Note: Serviceable GI tube retrieved under item No 39 shall be used for fixing.

S & F galvanised steel tubes 32mm bore, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed by Engineer-in-Charge.

Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/ laid in trenches including making good disturbed portion of wall floor etc all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 110 mm bore PVC (SWR) bends any radius, with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, double (double 'Y') equal or unequal, 110 mm bore with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction double (double T) equal or unequal 110mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 75 mm dia PVC (SWR) bends any radius provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) branch pieces, double (double Y) equal or unequal, 75 mm bore, with access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 75mm bore, with access door complete complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction double (double T) equal or unequal 75mm bore, with access door complete complete all as specified and directed by Engineer-in Charge.

S & F under counter wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste filling union and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, and all necessary inlet outlet connections complete all as specified and directed. Make : Jaguar Cat Pt No. CNS - WHT-705 or equivalent approved make indicated in list of makes in tender.

S & F in repair wall mount installation type, brass CP hand shower (Health Faucet) 15 mm bore with 1 meter long easy flex tube in chrome finish & wall hock complete fixed to wall all as specified and directed by Engineer-in Charge. (Make - Jaquar Cat No. ALD-565 or equivalent approved make indicated in list of makes in tender.

S & F in repair overhead shower 100 mm dia round shape single flow (ABS Body Chrome plated with grey face plate ) with Rubit cleaning system complete fixed to ceiling all as specified and directed by Engineer-in Charge. Make - Jaquar Cat No. OHS-1989 or equivalent approved make indicated in list of makes in tender.

S & F in repair stainless steel soap dish holder complete fixed to wall complete as specified and directed by Engr-in-Charge. Make- Jaquar CodeCat No ACN-1131N or equivalent approved make indicated in list of makes in tender.

S & F in repair brass CP chrome finish Toilet paper roll holder with flap fixed to wall with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. Make:Jquar Cat No. AQN-7753 or equivalent approved make indicated in list of makes in tender.

S & F brass chromium plated single towel rail, 60 cm long between flanges complete all as specified and directed by Engineer-in-charge. Make : Jaquar CAT No CAN-1111 NM or equivalent approved make indicated in list of makes in tender.

S & F in repairs brass chromium Angular stop cock with wall flange of 15mm bore capastan head complete all as specified and directed by Engineer-in-charge. Make - Jquar Code No. CON- 059KN or equivalent approved make indicated in list of makes in tender.

S & F in repair brass CP pillar tap long neck with 450mm long braided hose chrome finish complete all as specified and directed by Engineer-in-charge. Make - Jaquar Cat No.Code No CQT-230218 or equivalent approved make indicated in list of makes in tender.

S & F in repair wall mixer brass CP with provision for overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flange chrome finish complete all as specified and directed by Engineer-in-charge. Make - Jaquar Cat No.Code No FUS-29273UPR or equivalent approved make indicated in list of makes in tender.

S & F in repair urinal of size 355 x 340 x 535 mm, white colour with grating and union for discharge pipe (excluding flushing Cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal backing cement including making connections complete all as specified and directed. Make - Jaquar Cat No. URS-WHT-13261 or equivalent approved make indicated in list of makes in tender.

M&L for complete removing old water proofing treatment, plaster and cleaning the surfaces with wire brushes removing dust, foregin material and rubbish beyond 100m but n.exc 250m & M & L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under:- (a) apply one coat of oil based bituminous primer @ 0.25 kg/sqm. (b) laying 3 mm thick APP polymer modified membrane weighing not less than 3.5 kg/Sqm reinforced with non woven polyster weighing not less than 160 gm/sqm with thermal insulation by torch application method all as specified and directed by Engineer-in-charge. (c) Applying a coat of solar reflective bituminious aluminium paint @ 0.15 Kg/Sqm over the memberane. complete all as specified and directed by Engineer-in Charge.

M & L for rendering 15mm thick in as in bedding layer for water proofing treatment, in cement sand mortar (1:3) on roof surfaces mixed with WPC 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed by Engineer-in Charge. Note: Water proofing compound will be measured and paid seperately.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M & L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate for filleting and benching slightly rounded or chamfered on edges complete all as specified and directed by Engineer-in Charge.

M & L 100 mm dia of outlet, cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 & tested complete, all as specified and directed including taking down floor trap/nahani trap of any description any size.

M & L 75 mm dia of outlet, cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 & tested complete, all as specified and directed including taking down floor trap/nahani trap of any description any size.

S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed including taking down old , flushing cistern of any description any size.

S & F in viterous china wash down water closet pan (pedestal pattern) white, including P or S trap, provision of flush pipe , (including fixing bolts, and flush pipe) plastic seat any colour, closed pattern with flat bottom and cover and aluminium hinging device for pedestal pan complete all as specified and directed including taking down old wash down water closet pan of any description any size.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs stainless steel grating with or without hole 75mm dia complete as specified and directed by Engr-in-Charge.

S & F in repairs stainless steel grating with or without hole 100mm dia complete as specified and directed by Engr-in-Charge.

S & F in repair 15mm bore fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc 1.5 sqmbut n.exc 4 sqm each and removing from site complete all as sepcifed and directed.

S & F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put to gether with glue pinned at joints complete all as specified and directed.

S & F 30mm thick flush shutter, solid core construction, with block board core and both sides covered with plywood face panels with lipping/frame to match complete all as specified and directed.

S & F 30mm thick flush shutter, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match including taking down existing shutter and removing to store complete all as specified and directed.

M & L for mild steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed.

M & L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work complete all as all as specified and directed.

M&L for preparing surfaces of iron materials and treating with tar or coal tar paint small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as sepcifed and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S & F mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolts, ISI marked of extruded section and fixed, length of bolt 200 mm complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolt, ISI marked of extruded section and fixed, length of bolt 150 mm complete all as specified and as directed.

S & F 150 mm long aluminium anodised handles, ISI marked of extruded section complete all as specified and directed.

S & F 125 mm long aluminium anodised handles, ISI marked of extruded section complete all as specified and directed.

S & F 300mm long aluninium alloy, anodised , ISI marked, sliding door bolt with hasp, staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including taking down existing old window with frame of any description complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S & F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old ventilator with frame of any description complete all as sspecified and directed. (a) SP 20048 (b) Glazing clips 19352

Supply and fix in reapir 19/20 mm dia medium weight, aluminium powder coated of choice colour as in curtain rod/drapery rod complete all as specified and directed.

S & F in repairs brackets, powder coated of approved decorative type suitable for fixing curtain rods of 19/20mm dia pipe incl fixing screws, drilling etc as per sample approved by Engr-in-charge all as specified and as directed.

S & F in repair aluminium powder coated intermidiate brackets, decorative type of colour and design as spproved suitable for curtain rods of 19/20mm dia complete all as sspecified and directed.

S & F in repairs PVC flexible waste pipe 32mm dia, 450mm long with full thread brass coupling and washers complete all as specified and directed by Engineer-in Charge.

M & L cutting hole in brick walls/stone walls exc one brick thick but n.exc two brick thick for any purpose and making good dismantled position in cement mortor (1:3) or cement concrete (1:2:4) type B-1 as required complete as specified and directed by Engr-in-Charge.

M & L for cutting chases, pinning in stone, concrete block or slab walls and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n, exc 10 cm girth complete all as specified and directed complete as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F in repair flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only in repair flat iron fillets retrieved from the work (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S & F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, nut & bolt complete all as specified and directed by Engineer-in-Charge.

M & L for 40mm thick cement concrete (1:2:4) type B-1, (using 12.50 mm graded stone aggregate) as in sunken floor complete all as specified and directed.

M & L for 15mm thick plastering in CM (1:3) along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed. (Note : Water proofing compound will be measured and paid separately)

M & L for bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.

M & L for Polythene film black 50 micron laid in floor complete all as specified and directed.

M & L for cement concrete (1:4:8), type D2 (using 40mm graded stone aggegate) as in lean concrete in sunken floor complete all as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents regulators, sockets etc revoming materials to store for seperately) and making good disturbed surface of walls, floors etc complete all as specified and directed.

Taking down ceiling fans any type/sweep 230 V AC and refixing after cleaning, painting and making connection complete.

M & L for point wiring for light/fan/bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type and modular white cover plate with frame complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.

All as per item No 114 above but for 5 pin 5 amps socket outlet on same board with other switches complete all as specified and directed.

All as per item No 114 above but for 5 pin 5 amps socket outlet on independent board with other switches complete all as specified and directed.

M & L for point wiring for light/fan/bell with FRLSH cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type and modular white cover plate with frame complete all as specified and directed for 6 pin 15 amps socket outlet flush type on independent board controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.

S & F Modular switch, 1 way 6 amps, 1 module complete all as specified and directed.

S & F Modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S & F ceiling rose on PVC square blocks, 3 phase PVC/polycarbonate isolated body complete all as specified and directed.

S & F angle/batten lamp holder on PVC square blocks, PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S & F modular fan regulator electronic rotary stepped increase type 2 module 120W complete all as specified and directed.

S & F modular sockets 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S & F modualr switches 1 way 16 amp, 1 module complete all as specified and directed.

Supply and fixing on two PVC square blocks surface and wall mounted LED batten 20 watt (LED tube light fitting ) extruded aluminium housing provided for efficeint heat dissipation wth polycarbonate diffuser & integrated electronic driver including taking down old unserviceble one. Make- Havells cat No ENDURALINEARNEOBS20wLED840SPCWH or equivalent in Philips/wipro.

Supply and fixing on two PVC square bocks surface and wall monted LED batten 10 watt (LED mirror tube light fitting) extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic diriver incl taking down old unserviceble one. Make- Havells cat No ENDURALINEARNEOBS10WLED830SPCWH or equivalent inPhilips/Wipro.

S & F environmental friendly ultra modern energy saving surface mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LEDs 10w complete all as specified and directed. Make - Havells cat No RUGBYNEONFT10WLED860SSYMTOPC or equivalent to Philips/Wipro

S & F building security light luminaire LED type fitting 45Watt pressure die cast housing with individual LEDs suitable for 230 volts 50 Hz single phase AC supply IP 65 protection including suitable size GI bracket, medium grade not less than 1m in length bent to shape and fixing on wall with MS clamps and brackets incl taking down old unserviceable light fitting of any type. Make- Havells cat No ENDURAPEARLNEOSL45WLED757SASYTOPC or equivalent in Philips/Wipro.

S & F in replacement by flushing to walls MCB distribution board SPN 240 volts 8 way double door with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc complete all as specified and directed.

All as per item Nol 129 above but SPN 240 volts 4 way double door complete all as specified and directed.

All as per item No 129 above but TPN 415 volts 4 way double door complete all as specified and directed.

S & F in replacement MCB SPN 32 amps 230 volt 10 KA, tyep B complete all as specified and directed.

S & F in replacement MCB SPN 63 amps 230 volt 10 KA, type B complete all as specified and directed.

S & F in replacement MCB TPN 63 amps 415 volt 10KA complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 amps 230 volt 10KA type B complete all as specified and directed.

M & L for sub main wiring with two runs of 6 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 6 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC casing caping of desired colour not less than 1.2 mm thick and 25 mm wide with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 6 sqmm single core multi stranded PVC copper conductor,one run of 6 sqmm single core multi stranded PVC copper conductor and one run of PVC casing caping shall be measured as one length for payment.

M & L for sub main wiring with two runs of 10 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 10 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC casing capping of desired colour not less than 1.2 mm thick and 25 mm wide with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 10 sqmm single core multi stranded PVC copper conductor, one run of 10 sqmm single core multi stranded PVC copper conductor and one run of PVC casing caping shall be measured as one length for payment.

M & L for earthing complete with Gl earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 25x3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, with and including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade, Gl pipe for lead protection with and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part I connected to earthing test point all as specified and indicated including testing on completion including retrieving of old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed.

S & F single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB 20 amps all as specified and directed.

Supply and fixing LED lamp 10 watts 230V pin type 230 V 50 Hz all as specified and directed.

Mukund Engineers and Contractors

BSK Construction

Decent Decorators

UNIQUE ENGINEERS