SPL REPAIR TO PLUMBING WORK OF TOLIET KITCHEN AND MISC ITEMS OF MD ACCN NO P-194 AND P-171 AT NAGTALAO UNDER GE BANAR

Amount

Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land complete all as specified.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing complete all as specified.

Dismantling wall, hearth,floor tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured glazed ceramic tiles 350x250x7mm/450x350x7 mm thick as per IS 13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified.

M&L for Non -skid Ceramic tiles 7 to 8 mm thick (white), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for Light shade Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified.

All as item No 9.00 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified.

Taking down cement plaster on brick wall/stone masonry /RCC surfaces/ dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified.

M&L for 10 mm thick rendering in CM 1:6 on brick masonary finished even and smooth without using extra cement complete all as specified.

M&L for 10mm thick rendering in CM 1:4 over brick masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified.

M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified.

M&L for 15mm thick rendering in CM 1:4 on stone masonry finished even and smooth without using extra cement complete all as specified.

M/L for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper over priming coat complete all as specified.

M&L for three coats of white wash including preparation of new surfaces on walls complete all as specified.

M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified.

Material & Labour for Preparation of surface of wall including complete removal of existing treatement by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and making surface even and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including complete removal of existing treatment complete all as specified.

Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc 1.50 sqm each complete all as specified.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc 4.0 sqm each complete all as specified.

S&F PVC door frame wooden finish of size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified.

Taking down of window and ventilators complete all as specified.

Taking down and refixing existing steel window shutter in same opening after replacement of broken projecting type hinges with box type hinges incl necessary welding complete all as specified.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coverin, Doors, etc.(Fe 410-W Gde E-250 quality A ) to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

S&F IInd class hard wood 35 mm thick, factory made, plain, framed, paneled shutters (two panel) of 9 mm thick BWP marine grade plywood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive of conforming to IS 710. The sized of rails and styles shall be as per IS 1003 (Part I) Kiln seasoned as per IS 1141 and chemically pressure treated as per IS 401 complete all as specified.

S & F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

S&F 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified.

S&F factory made wooden finish PVC shutter 30 mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frmae shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail lock rail on other side and as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slovent cement complete all as specified.

S &F in repair of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size complete all as specified.

S&F in repair 150 mm long aluminium anodised tower bolt complete all as specified.

S&F in repair 150mm long aluminium anodised handle extruded section complete all as specified.

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M/L for two coat of synthetic enamel paint on old wooden surface including preparation of surface, over 10Cm width or girth complete all as specified.

M/L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth complete all as specified.

M&L for preparing old painted surfaces of steel or iron of any description not other wise described over 10cm width or girth & applying one coat of synthetic enamel paint Ist quality all as specified.

Taking up or down GI steel water tubing 15 mm bore and connection, including cleaning for refixing or remove to site complete all as specified.

Taking up or down GI tubing 20 mm bore and connection, including cleaning for refixing or remove to site complete all as specified.

Supply & Fixing 15mm bore GI Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supply & Fixing 20mm bore GI Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

S/F in repair of bib cock 15mm dia, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified.

S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union complete all as specified.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

M&L for Cement concrete Type C2 (1:3:6)(40 mm graded) in foundations, filling and mass concrete complete all as specified.

S&F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified.

S&F in repair tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end complete all as specified.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4 complete all as specified.

S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor complete all as specified.

Dismantling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified.

Dismantling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified.

Supplying and laying of 75 mm dia PVC pipes SWR & Plain PVC SDR 11 fittings in trenches complete all as specified.(with all fitting)

Supplying and laying of 110 mm dia PVC pipes SWR & Plain PVC SDR 11 fittings in trenches complete all as specified. (with all fitting)

Supplying and laying of 75 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

Supplying and laying of 110 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

S&F 75 mm bore PVC bends any radius with oval acess door complete all as specified.

S&F 110 mm bore PVC bends any radius with oval acess door complete all as specified.

S&F for 100mm dia PVC cowls, diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed complete all as specified.

S&F in repair 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc complete all as specified.

S&F in repair 15mm bore PVC connection 600mm long best quality with PTMT nuts complete all as specified.

S&F in repair Kitchen sink without drainage board made of stainless steel 1mm thick with plug, washers and waste Including bedding in cement mortar or Including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm & bowl size 410mm x 330mm x 160mm including brass waste coupling, PVC wastepipe complete all as specified.

M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified.

M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic complete all as specified.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified.

M&L for roof treatement in the following stages :-(a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified . (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides, thickness 3 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) 40mm thick PCC padding in cement concrete 1:2:4 (12.5 mm graded aggregate finishing even and smooth) complete all as specified.

Treatment of sunken portion is as follows:- (i) demolition of lean concrete and other type of filling in sunken portion & cleaned portion incl vertical wall surface complete as directed (ii) M&L for providing 12 mm dia holes of 40 mm deep @2.00 mm c/c at junction of beams and columns as co-ordial points for inserting /pouring cement slurry by pressure grouting for sunken floors of toilet , including sealingthe hole with CM 1:3,all specified and as directed by EIC. (iii)M&L for water proofing for sunken portion in CM 1:3,20 mm thick two coats with water proofing compound at rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement .(WPC to be measured and paid separately) (iv)M&L for apply in evenly two coats of industrial bitumen 85/25 at rate of 1.20kg/sqm (v)A layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides, thickness 3 mm having weight 2.25 Kg/Sqm. (v)M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in filling (sunken portion),etc. (vi)M&L for PCC1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @2% by wt of cement as sub base, 75 mm thick. .(WPC will be measured and paid separately) on top (vii)M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at rate of 2% by weight of cement and finishing the surface even and fair.(WPC will be measured and paid separately)(screed bed to recieve ) Note:(a) Test again of water tightness by pounding for 72 hrs & rectify defects if any till total elimination of defect (b) The sunken portion shall be tested for leakage /seepage/dampness by pounding with water for 72 hours . in case of any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical &tested again.The process of grouting and testing shall be repeated till leakage /seepage/dampness is eliminated (c) Horizontal flat area to be measured.

Dismantling water tanks of exc 250 litres n exc 500 litre capacity and removing to store complete all as specified.

S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 500 ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as specified.

Supply only integral water proofing compound (ISI marked) complete all as specified.

Demolition of stone masonry /block walling built in cement mortar complete all as specified.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified.

M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete, in walls complete all as specified.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified.

M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement complete all as specified.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified.

S&F in repair Soap Dish complete all as specified.

S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample kept in GE's office complete all as specified.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified.

M&L for salt glazed stoneware drain pipes 150mm dia (internal) grade 'A' laid in trenches and jointed in CM(1:1) including taking down old u/s pipe complete all as specified.

S&F 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

M&L for cement concret (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork all as specified.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each complete all as specified.

Removing excavated soft/loose soil to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depth nexc 60 cm complete all as specified.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density manufactured by an ISO 9000 certified company using for shutter celluca ply 18 mm thick cut in desired size of shutter and fixed with frame of kitchen accesory/cubboard at all four edges of shutter using 13/6 size self tapping steel screws. below cooking platform The thickness of the shutter is edfe painted by matching colour of PVC ink of plain colour of PVC sheet using complete all as specified and directed by Engineer-in-Charge and manufacturers specification. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L in repair for Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified.

M&L in repair for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

M&L in repair for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F in repair of Vitreous China wash basin size 450 x 300mm, white, flat back, including 32 mm CP waste coupling, waste pipe, PVC Connection 450 mm long, brackets complete all as specified.

S&F in repair 15 mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F MS chromium plated peg set of five fixing with wall complete

Demolition of cement concrete in ground floors and pavings exe 15 cm thickness but above ground level complete all as specified.

M&L for 100 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified.

S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.Office laid over sand filling layer & spreading fine sand over the tiles to fill in the joints & cleaning the same after filling of joints complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick CM (1:6) cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 15 mm thick CM (1:6) laid over cement screed and jointed complete all as specified.

S&F in repair Pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

AJEET ENTERPRISES (BID ID -3279834)

RISING ELECTRICALS (BID ID -3273492)

M/s Anand Construction Company (BID ID -3277224)