REPAIR/REPLACEMENT OF UNSERVICEABLE WATER SUPPLY DISTRIBUTION NETWORK IN MARRIED/OTM ACCN AT SHIKARGARH, BSE, NAFLAND AREA IN ARMY AREA JODHPUR

Amount

Excavation in trenches not exc 1.5m width and not exc 1.5 m in depth and getting out for laying of pipes etc in soft/loose soil .

Returning filling in including spreading levelling watering and ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated surplus soil to a distance not exceeding 50M where directed and at a level not exceeding 1.5 M above the starting point.

M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge of size 100 mm bore.

All as per item ser No 4 above but for 150 mm bore.

All as per item ser No 4 above but for 200 mm bore.

All as per item ser No 4 above but for 300 mm bore.

All as per item ser No 4 above but for 350 mm bore.

Supply and lay DI pipe centrifugally cast of class K-7 with spigot and socket ends/flanged end suitable for tyton joints/flanged joints including rubber gasket/rubber ring and other accessories like nut-bolts etc of size 100 mm bore. Make: Jindal, Electrosteel castings, Electrotherm (India).

All as per item ser No 5 above but for 150 mm bore.

All as per item ser No 5 above but for 200 mm bore.

All as per item ser No 5 above but for 300 mm bore.

All as per item ser No 5 above but for 350 mm bore.

Material and labour for fixing DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of size upto 150 mm bore .

All as per item ser No 6 above but above 150 mm bore.

Supply and Fixing for DI sluice valve of 80 mm bore PN-1.6 incl new rubber gasket, nuts and bolts, stainless steel spindle etc including dismantling of existing unserviceable one complete all as specified and as directed. Make: Kartar, BIR, Kirloskar.

All as per item ser No 7 above but for 100 mm bore.

All as per item ser No 7 above but for 150 mm bore.

All as per item ser No 7 above but for 200 mm bore.

Material and labour for repairing the leakage of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed of size f80 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

All as per item ser No 8 above but for 100 mm bore.

All as per item ser No 8 above but for 150 mm bore.

All as per item ser No 8 above but for 200 mm bore.

All as per item ser No 8 above but for 250 mm bore.

All as per item ser No 8 above but for 300 mm bore

All as per item ser No 8 above but for 350 mm bore

Supply and fix LRC joint /Detachable joint for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required and directed of size 80 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

All as per item ser No 9 above but for 100 mm bore.

All as per item ser No 9 above but for 150 mm bore.

All as per item ser No 9 above but for 200 mm bore.

All as per item ser No 9 above but for 250 mm bore.

All as per item ser No 9 above but for 300 mm bore.

All as per item ser No 9 above but for 350 mm bore.

Material and labour for repairing the leakage of flange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed of size 100 mm bore. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

All as per item ser No 10 above but for 150 mm bore.

All as per item ser No 10 above but for 200 mm bore.

All as per item ser No 10 above but for 250 mm bore.

All as per item ser No 10 above but for 300 mm bore.

Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of size 15mm bore.

All as per item ser No 11 above but for size 20mm bore.

All as per item ser No 11 above but for size 25mm bore.

All as per item ser No 11 above but for size 40mm bore

All as per item ser No 11 above but for size 50mm bore.

All as per item ser No 11 above but for size 80mm bore.

All as per item ser No 11 above but for size 100mm bore.

M&L galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fitting concealed or fixed to walls, celling or laid in floors including chase cuttings where required, making good to distributed surfaces as per existing as directed and specified of size 15mm bore. Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate by the tenderer. Make: Jindal, Prakash Surya, Tata

All as per item ser No 12 above but for size 20mm bore.

All as per item ser No 12 above but for size 25mm bore.

All as per item ser No 12 above but for size 50mm bore.

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked) laid in trenches jointed and tested complete all as specified and directed for 15mm bore. Make: Jindal, Prakash Surya, Tata

All as per item ser No 13 above but for 20mm bore.

All as per item ser No 13 above but for 25mm bore.

All as per item ser No 13 above but for 40mm bore

All as per item ser No 13 above but for 50mm bore.

All as per item ser No 13 above but for 80mm bore

All as per item ser No 13 above but for 100 mm bore

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of sicze 15 mm dia incl taking down and removal from site:- Make: Kartar, Sant, Zoloto

All as per item ser No 14 above but for size 20 mm dia

All as per item ser No 14 above but for size 25 mm dia.

All as per item ser No 14 above but for size 50 mm dia

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate with PCC blocks 20 cm thick wall built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron (50x50x6mm) of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of size size 1050 x 1200 x 1000mm.

All as per item srl No 15 but of size 900 x 600 x 1000mm

All as per item srl No 15 but of size 450 x 450 x 600mm

All as per item srl No 15 but of size 2500 x 2200 x 1500mm and wall thickness of 30 cm PCC blocks

Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts for connection from existing 50-300 mm bore CI/DI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site.

S&F in replacement of u/s PVC float valve,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20 mm bore.

S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25 mm bore.

Material and labour for laying of pipe under road crossing of size 50 mm to 200 mm by trenchless technology by aguring or mechnical means in any type of soil.

M & L for road cutting and repairing the same with road patch material width upto 75 cm all as specified and directed by EIC. Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a penalty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in support of pipes or foundation of pump complete all as directed.

M&L 15 mm thick cement plaster in cum (1:6) on brick/stone/PCC surface fair and even complete all as directed

S&F CI foot valve ball type, threaded/flanged as required of 50mm bore ball type. :- Make: Normex, Kartar, Sant

All as per item ser No 23 above but for size 80mm bore ball type.

All as per item ser No 23 above but for size 150mm bore ball type.

All as per item ser No 23 above but for size 200mm bore.

S&F CI Non Return Valve PN 1.6 of 150 mm bore size. Make: Kartar, BIR, Kirloskar

S&F DI air release valve with two air outlets, 50mm dia bore and fixing up in cast iron/ DI water supply mains complete all as specified and as directed

S&F DI air release valve with two air outlets, 80mm dia bore and fixing up in cast iron/ DI water supply mains complete all as specified and as directed

Supply and fixing for CI Butterfly valve (ISI Marked) size 150 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant

Supply and fixing for CI Butterfly valve gear operated (ISI Marked) size 200 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant

Taking up raising/ delivery DI water mains 100mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket with nut bolts & washers of any size and relaying the same with using new gasket / tyton joint complete all as specified and as directed. Note: Cost of excavation/ earth work required shall deemed to be included in quoted rates.

All as per ser item no 29 above but of size 150 mm bore

All as per ser item no 29 above but of size 200 mm bore

All as per ser item no 29 above but of size 300 mm bore

Material and labour for disconnecting of 20/25/50 mm UPVC/HDPE connections from existing 50/80/100 mm GI/DI pipeline as required at site making proper alignment and replacing the pipe with GI pipe in original position with additional plumbing/welding works as required at site and testing the same for any leakage and pressure to overhead tank complete all as specified and directed by Engineer-in-charge. Note :- 1. Cost GI fittings required like Tee, elbow, Nipples etc as required shall deemed to be included in quoted rates. 2. Cost of any additional plumbing work/welding work deemed to be included in quoted rates. 3. Cost of excavation/ earth work required shall deemed to be included in quoted rates. 4. Contractor shall rectify the fault and reconnect the pipeline at the same day. 5. Any GI pipe installed in place of UPVC/HDPE shall be measured under respective Sch 'A' item.

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size 300 mm bore in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.

All as per ser item no 31 above but of size 250 mm bore

All as per ser item no 31 above but of size 200 mm bore

All as per ser item no 31 above but of size 150 mm bore

All as per ser item no 31 above but of size 100 mm bore

All as per ser item no 31 above but of size 80 mm bore

Shri Electrical Enterprises (BID ID -3313202)

Anil Builders (BID ID -3312555)