Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.4 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹15.3 L+₹83,260.99 (5.77%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹15.5 L+₹1.1 L (7.53%)Rejected-AOC | 3 | Rejected-AOC L3 | |
| 4 | 4₹15.8 L+₹1.4 L (9.87%)Rejected-AOC | 4 | Rejected-AOC L4 | |
| 5 | 5₹144.2 Cr+₹144.0 Cr (99854.6%)Rejected-AOC | 5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | BIJU V P L5 | N D JOHNSON L3 | SANEESH A S L2 | K P SANU L1 | Abhilash L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Building | ||||||||
| 1.00 | OD357401/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester
top coat 15-18 microns.Sheet should have protective guard film of 25 microns
minimum to avoid scratchesduring transportation and should be supplied in
single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall
be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required | 429.3 | sqm | 693 ₹2,97,504.9 | 621.1 ₹2,66,638.23 | 559.05 ₹2,40,000.17 | 540 ₹2,31,822 Lowest | 580.72 ₹2,49,303.1 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,888.92 | kilogram | 158 ₹2,98,449.36 | 116.69 ₹2,20,418.07 | 105.03 ₹1,98,393.27 | 90 ₹1,70,002.8 Lowest | 109.1 ₹2,06,081.17 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,888.92 | kg | 168 ₹3,17,338.56 | 118.01 ₹2,22,911.45 Lowest | 174.86 ₹3,30,296.55 | 160 ₹3,02,227.2 | 181.64 ₹3,43,103.43 |
| 1.00 | OD366530/2025-2026:Plain ridge capping 225mm flaps with 0.35mm/nearest available thickness SS screws
including plain washers and bitumen washers etc complete. | 60 | metre | 412 ₹24,720 | 286.62 ₹17,197.2 | 257.98 ₹15,478.8 | 210 ₹12,600 Lowest | 267.98 ₹16,078.8 |
| 1.00 | OD357402/2025-2026:Man coolie | 5 | Day | 1,232 ₹6,160 Lowest | 2,218.45 ₹11,092.25 | 1,996.82 ₹9,984.1 | 1,700 ₹8,500 | 2,074.25 ₹10,371.25 |
| 1.01 | OD357400/2025-2026:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws
and mica finishing,fittings wherever required, edges to be painted with polyurethane primer
(fittings to be paid separately) as per the direction of site Engineer-in-charge. | 113.81 | sqm | 2,096 ₹2,38,545.76 | 2,033.6 ₹2,31,444.02 | 1,830.44 ₹2,08,322.38 | 1,800 ₹2,04,858 Lowest | 1,901.41 ₹2,16,399.47 |
| 1.01 | 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover | 10.5 | sqm | 4,023 ₹42,241.5 | 3,596.89 ₹37,767.35 | 3,237.56 ₹33,994.38 Lowest | 3,400 ₹35,700 | 3,363.09 ₹35,312.45 |
| 1.01 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 944.55 | sqm | 114 ₹1,07,678.7 | 113.94 ₹1,07,622.03 | 102.55 ₹96,863.6 | 80 ₹75,564 Lowest | 106.53 ₹1,00,622.91 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 51.3 | sqm | 157 ₹8,054.1 | 164.86 ₹8,457.32 | 148.39 ₹7,612.41 | 130 ₹6,669 Lowest | 154.14 ₹7,907.38 |
Tender Value
₹16.9 L
EMD Value
₹42,372
Closing Date
7 Feb 2026, 4:00 pmClosed
AE
AE LIDEW Sub Division Mala Block Panchayath
Rennovation of Veterinary poly clinic office building
2026_LSGD_832451_1
041/25-26
Open Tender
Civil Works - Buildings
Item Rate
240 days
Mala
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
Yes
₹42,372
Yes
10 Mar 2026
31 Jan 2026
9 Feb 2026
31 Jan 2026
7 Feb 2026
31 Jan 2026
Building
OD357401/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD366530/2025-2026:Plain ridge capping 225mm flaps with 0.35mm/nearest available thickness SS screws including plain washers and bitumen washers etc complete.
OD357402/2025-2026:Man coolie
OD357400/2025-2026:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and mica finishing,fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.
10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover
13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
17.18.2:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - coloured
OD369495/2025-2026:15mmCP short body tap
OD386626/2025-2026: Supplying and applying of ShaliHDPE® SA/SIKA/BASF is a multi-layer compound waterproofing membrane, composed of a layer of highdensity polyethylene (HDPE) film 1.20mm thickness, polymer press-sensitive adhesive layer and unique technology reactive inorganic fine granule or silicon-oiled release film layer, specially designed for underground basement structure waterproofing, and suit for pre-applied construction method. This waterproofing membrane with cast-in-place concrete by chemical cross-linking to achieve high strength bonding can completely prevent moisture penetration and leaking, without basal displacement effect
OD386627/2025-2026:Supplying and injection of Shaligrout /SIKA/BASF EI to points to seal the cracks and strengthening the concrete
OD386628/2025-2026: Supplying and injecting of Polyurethene foam Shaligrout/SIKA/BASF PU in to points.
OD387486/2025-2026:Supplying and fixing handles
OD387487/2025-2026:Supplying and fixing autohinges
13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)
OD357386/2025-2026:Supplying and fixing Name Board at site as per the direction of departmental officers at site
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1399293.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.08 MB
affidavit.pdf
Tender Documents • 0.24 MB
BOQ_1399293.xls
BOQ • 0.31 MB
fot.pdf
Tender Documents • 0.25 MB
pa.pdf
Other Document • 0.26 MB
epayment.pdf
Tender Documents • 0.24 MB
sbd.pdf
Tender Documents • 0.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .