Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹3.5 L+₹36,742.55 (11.6%)Rejected-Finance | ₹3.5 L+₹36,742.55 (11.6%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.7 L+₹50,681.99 (15.9%)Rejected-Finance | ₹3.7 L+₹50,681.99 (15.9%) | L3 | Rejected-Finance L3 |
| 4 | L4₹3.9 L+₹70,207.95 (22.1%)Rejected-Finance | ₹3.9 L+₹70,207.95 (22.1%) | L4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | V. ASHRAF L1 | SUNIL KUMAR N L2 | ARUN SUNDAR O L4 | SHIJITH P L3 |
|---|---|---|---|---|---|---|---|
| 1.00DETAILED ESTIMATE | |||||||
| 1.00 | OD141234/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness
with zinc
coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on
both side of
the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns
minimum to avoid scratches during transportation and should be supplied in single length upto
12 metre or
as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
of size
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the
cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 219.5 | sqm | 461 ₹1,01,189.5 Lowest | 515 ₹1,13,042.5 | 560 ₹1,22,920 | 533.76 ₹1,17,160.32 |
| 1.00 | OD141235/2025-2026:Supplying and fixing 150 mm dia pvc rain water gutter semi circular section including fitting with 32*5 cm flat supporting at 1 m interwal etc.complete | 52.75 | metre | 377 ₹19,886.75 Lowest | 420 ₹22,155 | 460 ₹24,265 | 436.8 ₹23,041.2 |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 15 | metre | 734 ₹11,010 Lowest | 800 ₹12,000 | 870 ₹13,050 | 829.44 ₹12,441.6 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.91 | cum | 7,210 ₹6,568.31 Lowest | 7,845 ₹7,146.8 | 8,490 ₹7,734.39 | 8,144.07 ₹7,419.25 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,015.67 | kg | 147 ₹1,49,303.49 Lowest | 164 ₹1,66,569.88 | 180 ₹1,82,820.6 | 170.88 ₹1,73,557.69 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 220.59 | sqm | 124 ₹27,352.66 Lowest | 140 ₹30,882.04 | 155 ₹34,190.83 | 144.96 ₹31,976.15 |
| 1.01 | 11.40:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | 2.16 | sqm | 1,171 ₹2,529.36 Lowest | 1,290 ₹2,786.4 | 1,420 ₹3,067.2 | 1,354.56 ₹2,925.85 |
Tender Value
₹3.8 L
EMD Value
₹9,616
Closing Date
20 Aug 2025, 6:00 pmClosed
Assistant engineer
LID and EW Section Thalakkulathur Gp Kozhikode
Roof truss and sheet work
2025_LSGD_785683_1
LSGD/CELSGD/TR/89123/2025
Open Tender
Civil Works - Buildings
Item Rate
Thalakkulathur GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹850
Yes
₹9,616
Yes
27 Nov 2025
13 Aug 2025
22 Aug 2025
13 Aug 2025
20 Aug 2025
13 Aug 2025
Amount
DETAILED ESTIMATE
OD141234/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD141235/2025-2026:Supplying and fixing 150 mm dia pvc rain water gutter semi circular section including fitting with 32*5 cm flat supporting at 1 m interwal etc.complete
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
11.40:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
SUNIL KUMAR N (BID ID -2298794)
SHIJITH P (BID ID -2298360)
ARUN SUNDAR O (BID ID -2298824)
Bidder Name
V. ASHRAF
SUNIL KUMAR N
ARUN SUNDAR O
SHIJITH P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .