REPAIR / REPLACEMENT OF LT ACBs, PANELS, POLES, EARTHING, LT UG CABLES AND LT SWITCH GEAR ITEMS, LT ACSR CONDUCTOR, UG CABLES, HIGH MAST POLES, LED LIGHTS, LED STREET LIGHTS AND SOME ALLIED WORKS AT BARRACKPORE MIL STN UNDER GE BARRACKPORE.

Amount

Supply and fixing MCCB 4 pole, 415V, 400 Amps rupturing capacity 36KA thermal magnetic based on LT panel/feeder pillar box including dismantling/taking down existing unserviceable MCCB complete all as specified and directed.

Supply and fixing MCCB 4 pole, 415V, 250 Amps rupturing capacity 25 KA thermal magnetic based on LT panel/feeder pillar box including dismantling/taking down existing unserviceable MCCB complete all as specified and directed.

Supply and fixing MCCB 4 pole 200 Amps rupturing capacity 25 KA thermal magnetic based on LT panel/feeder pillar box including dismantling/taking down existing unserviceable MCCB complete all as specified and directed.

Supply and fixing MCCB 4 pole 100 Amps rupturing capacity 16 KA thermal magnetic based on LT panel/feeder pillar box including dismantling/taking down existing unserviceable MCCB complete all as specified and directed.

Material and labour for ACB sheet steel enclosure made out of 2 mm thick CRCA sheet of size (1000 x 800 x 800)mm duly painted with powder coating in approved shade, rubber, gasketed, hinged door having front and rear opening, locking arrangement and any manufacturer shall be followed CPRI norms suitable for fixing of LT ACB draw out type, 3 phase,4 pole,415V and including providing of holes for incoming and outgoing cables, CTs,Controll fuses,controll wiring,Phase indication lamps, gland plate cover,danger notice plate and including incoming and out going suitable rating bus bars,Neutral bars,Earthing bars and including MS angle iron frame of size (50x50x6)mm with supports at a height 1 metre with red oxide primer and two coated of synthetic enamel paint to MS sections and embedded in floor with necessary PCC foundation with cement concrete 1:3:6 type C-1 including taking out old unserviceable enclosure complete all as specified and directed. Note - ACB 800 amp will be measured and paid separately under Srl Item No. 6 here in after.

Supply, install, testing and commissioning of Air Circuit Breaker (ACB) 800 Amps, 4 pole, 65KA, 415volts, 50Hz manual drawout type with microprocessor released, spring charged mechanism and shall be enclosed in sheet steel enclosure complete all as specified and directed. Make Legrand/ABB/Havells Note - Sheet metal enclosure will be measured and paid separately under Srl Item No. 5 here in before.

Taking down unserviceable street lights/wall mounted lights/flood lights/Post top lantrens /Guarden lights and decorative out door type lights in any wattage from 6 watt to 400 watts on any type of poles, highmast lights at any height/any places for servicing/overhauling/repair and replacement of unsv items and maintenance and including providing damaged spare parts/burnt out accessories such as wires,surge protector,LED drivers,LED strip,MCBs ,GI brackets,MS clamps,Timer switch,LED neon lamp,slector switches, Hole fastners etc as required for functioning items to be replaced as per site requirement is in under supply only materials and complete all as specified and directed by Engr-in-Charge. Note:- (i) New spare parts / fixtures will be measured and paid separately as supply only items from Item Srl No. 8 to 33 here in after.

Supply only 3.0 core, 1.0 sqmm PVC sheathed, flexible,multistranded copper conductor cable,1100Volts grade complete all as specified and directed.

Supply only 3.0 core, 1.5 sqmm PVC sheathed, flexible,multistranded copper conductor cable,1100Volts grade complete all as specified and directed.

Supply only 3.0 core, 2.5 sqmm PVC sheathed, flexible,multistranded copper conductor cable,1100Volts grade complete all as specified and directed.

Supply only PVC conduit pipe,20 mm dia medium grade, ISI marked complete alongwith firxing arrangement all as specified and directed.

Supply only MCB SP 6 Amps,240Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only MCB SPN 32-40 Amps,240Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only MCB TPN 63 Amps,415Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only GI bracket 25 mm dia medium grade pipe of length 1.2 mtr and including bending and necessary shape as required at site complete all as specified and directed.

Supply only GI bracket 40 mm dia medium grade pipe of length 1.2 mtr and including bending and necessary shape as required at site complete all as specified and directed.

Supply only fabricated flat iron MS clamps 25X5mm & 30 mm x 6 mm as required and including necessary holes,nuts,bolt and washers etc and bending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of paint and directed

Supply only LED electronic driver of capacity upto 6 watt to 18 wattage,240 Volts,50 Hz suitable for decorative and guarden lights as existing complete all as specified and directed.

Supply only LED electronic driver of capacity upto 20 watt to 36 wattage,240 Volts,50 Hz suitable for wall mounted and post top lantrens as existing complete all as specified and directed.

Supply only LED electronic driver of capacity upto 40 watt to 60 wattage,240 Volts,50 Hz suitable for street lights as existing complete all as specified and directed.

Supply only LED electronic driver of capacity upto 70 watt to 90/100 wattage,240 Volts,50 Hz suitable for street/security lights as existing complete all as specified and directed.

Supply only LED electronic driver of capacity upto 120 watt to 150 wattage,240 Volts,50 Hz complete as existing complete all as specified and directed.

Supply only LED electronic driver of capacity upto 200 watt to 250 wattage,240 Volts,50 Hz complete as existing complete all as specified and directed.

Supply only LED electronic strip rating 6 watt to 18 watt ,240 Volts,50 Hz suitable for garden lights and indoor decorative type lights as existing complete all as specified and directed.

Supply only LED electronic strip rating 20 watt to 40 watt ,240 Volts,50 Hz suitable for Post Top lanterns and wall mounting lights as existing complete all as specified and directed.

Supply only LED electronic strip rating 60 watt to 90 watt ,240 Volts,50 Hz suitable for Street lights and security lights as existing complete all as specified and directed.

Supply only LED electronic strip rating for 100 watt to 150 watt ,240 Volts,50 Hz suitable for street light and flood lights as existing complete all as specified and directed.

Supply only LED electronic strip rating 200 watt to 250 watt ,240 Volts,50 Hz suitable for flood lights complete as existing complete all as specified and directed.

Supply only surge protect device IP-66 suitable for 60 watt LED light to 250 watt fittings upto 4 -10 KV Surge protector,240Volys,50Hz as existing complete all as specified and directed.

supply only Analogue time switch(Daily time switch) with suitable power contactor 32 Amps ML-2 type,3Phase,415 volts complete all as specified and directed.

Supply only LED phase indication lamps RYB-01 set of three complete as existing complete all as specified and directed.

Supply only highmast metalic chain suitable for existing pully and shaft for existing arrangements including greasing and oiling complete as existing complete all as specified and directed.

Supply and fixing of 15/16 mtr highmast stainless steel wire rope grade AISI-316,6mm dia of 3 Nos for lantern carriage and 02 Nos for double drum winch 2350 Kgs per stainless steel rope of breaking capacity complete all as spfd and directed.

M&L for re-winding of Highmast 3 Phase motor,3HP,415Volts,50Hz including taking out from existing position including providing same/suitable guage copper wing wire as existing, proper varnishing,heating and testing and including complete overhauling and servicing with necessary accessories replaced such as capacitor,connectors,Nylon fan blades,nuts,bolts and washers etc complete all as spfd and directed.

Taking down existing highmast pole by mechanical method using by hydra suitable tonnage for maintenance any type/ height and refixing after maintenance and testing complete all as spfd and directed.

Supply and fixing high mast suitable for highmast 15/16 mtr as existing stainless steel in two section for 08 Nos flood light fixing arrangement including nuts,bolts and washers etc complete all as spfd and directed.

Taking out of existing old unserviceable pole 7.5 to 9.5 metres long of any type from the PCC foundation,couping and including carefully taking down existing ACSR conductor,cables,Street light,Security light fitting, GI brackets, looping boxe, stay assembly of any type & patten etc,after disconnection of electric supply by using necessary T&P/crane/ any mechanical method will be applied and debris disposal upto distance not exc 50 mtr at defence land complete all as specified and directed.

M&L for steel tubular swaged type poles 9 metrs long,pole weight approximately 154 kgs, pole should be in one piece only and smooth finishing,ISI marked complete with all accessories such as cast iron base plate, finial taper plug,bolts, nuts, screws,washers and drilling of holes for continious GI earth wire as specified type 410 SP-32 including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer and embedded portion shall be painted with two coats of black paint after preparation of surface complete all as specified and directed make as approved Note:- Necessary earth work and PCC shall be measured and paid separately.

M&L for cross arms,bracings,supports,clamps, angles etc and back plates fabricated in structural steel sections including nuts, bolts,washers, welding, bending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and applying one coat of synthetic enamel paint over a coat of red oxide primer and including removing old unserviceable item complete all as specified and directed

M&L for aluminium conductor with steel reinforced ACSR conductor as required type for fixing and stretching properly drawn for overhead lines on poles including binding at site to insulator with suitable size of wire and it is to be determined by measuring taut horizontal distance between centre of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra added for sag,jointing and jumper etc and including removing old unserviceable item complete all as specified and directed make as approved.

Dismantling of existing old unserviceable insulators from pole any type/size complete all as specified and directed

M&L for pin type porcelain ,vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one iron nut ,100 mm height,65 mm dia for 1100 volts grade complete all as specified and directed

M&L for loop type insulator, vitreous porcelain white, brown or green of large size with overall dimensions 90mm X 140 mm clearance of hole 25.5 mm including necessary clamps,nuts, bolts and washers complete all as specified and directed

Dismantling of existing broken/unserviceable stay assembly complete and S&F for new stay assembly complete with accessories and GI stay rod 20 mm dia 1900 mm long,stay wire7/4 mm stranded galvanised including mild steel stay plate 300mm x300 mm x 6 mm and galvanised thimble, galvanised steel 14 mm dia 400mm long stay bow and GI nuts, bolts ,washers including loop type insulator vitreous porcelain white brown or green big size with overall dimensions 90 mm x140 mm clearance of hole 25.5 mm complete all as specified as shown in electrical plate No.1 of SSR Part-I Note:- Cost of excavation, concrete work,removing of surplus soil,returning filling is deemed to be included in quoted rate.

Supply and fix cable junction box (Loop in & loop out) of size (155 x 210 x 92)mm water & fire retardent proof out door type of approved size,hinged/screwed type made of SMC plastic single door with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps,240V,10KA,'C' Series and including galvanised flat iron clamps of size 25X5mm thick -02 Nos GI nuts, bolts & washers etc for fixing on PCC/Steel tubular pole/ wall surface etc and including removing of old unserviceable item complete all as specified and directed. Make:- Hensil cat No.KF 1616B as equivalent approved make in Sintex cat No.GSJB 4030

Material and labour for PVC conduit heavy duty of size 20 mm dia from looping box to Street light connector, holding in MS clamp of size 25X2 mm thick at every one mtr used in each pole 04 Nos of clamps with necessary nut,bolts and washers etc and including PVC sheathed three core multistranded copper conductor cable of size 1.5 sqmm from looping box to light fitting connector and including removing of old unserviceable item complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, RCC cover 1:2:4 type B1 of size (45X45X6) CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value and including removing old item complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 25 X 4 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1 of size (45X45X6) CM, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value and including removing old item complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 120 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 95 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 25 sqmm ,4.0 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 16 sqmm ,2.0 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium stranded conductor 1100 volts grade,cross-sectional area 10 sqmm ,2.0 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands,nuts,bolts and washers etc and testing including taking out old one complete all as specified and directed.

Material and labour for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade ,cross-sectional area 6 sqmm; 2 core laid in trenches/pipes/ducts/walls with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking out old one complete all as specified and directed. Note for item No 51 to 56 :-Excavation/earth work,sand cushioning,cable cover/bricks shall be measured and paid separately.

Supply and fix GI bracket pipe of size 40 mm dia medium grade of 1.5 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing any place of poles with nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply and fix LED secruity light fitting of capacity 70-75 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:-ENDURACITYLINERNEOSL70WLED757PASYBOTG/Bajaj Cat No.ENXTP72LWHCRPCSD/CROMPTON GREAVES CAT NO LSTP-72-CDL-M approved

Supply and fix LED secruity light fitting of capacity 90 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:- Crompton cat ref No.LST-90-CDL M/Havells Cat No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO/Bajaj Cat No.BRTFG90W LED CR

Supply and fix LED flood light light fitting of capacity 200 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:- Havells Cat Part No URAPEARLGRANDSL200WLED757PASYTOTG/ Crompton cat ref No.LSTN-200-A-M/Bajaj Cat No.BRTFG200W LED I as approved

Supply and fix 35/40 watts LED post top lantern made in cast aluminium spigot housing with decirative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :- Havells Cat Part No RUBYPT35WLED757PSYMTOPC/Bajaj Model BGCL 40 W LED WH 40W LED /Crompton Cat Ref:LPTM-40-CDL as approved

Supply and fix 9 watts LED garden light Integral Decorative LED Bollard with polycarbonate diffuser and IP65 protection and providing suitable fixing arrangements such as lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make : Bajaj Cat Part No BGBOM605 9W LED or equivalent Make of Crompton/C&S as approved

Supply and fix 9 watts LED garden light Integral Decorative LED Bollard with opal acrylic and IP65 protection and providing suitable fixing arrangements such as lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed . Make : Bajaj Cat Part No BGBOS600 9W LED or equivalent of Crompton/Havells

Boring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Material and labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) for making good cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed. Note:- The quoted rate of the bidder deemed to be included for making smooth finishing of top surface of pole coping and three coats of white wash.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Excavation in trenches exceeding 1.5 mtr depth and not exc 3.0 mtr depth and not exceeding 1.5 mtr wide for foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings including taking out old one complete all as specified and directed. Make:- Jindal/Tata/swastik/BST

Material & labour for GI pipe 40 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings including taking out complete all as specified and directed. Make:- Jindal/Tata/swastik/BST

Supply and fix in repair switch disconnector fuse unit panel mounted cubical type three pole and neutral AC 415 volts 50 Hz 100 Amps in sheet steel enclosure with 3 Fueses including of mounting, errecting with suitable size angle iron and all as specified and directed. Make:- Havells

JADAV CONSTRUCTION

ONIEL SALES

TOTCO

M/S. ARUP KUMAR DEY

SENCO