PROVIDING GROUND DEVELOPMENT WORKS, ELECTRICAL WORKS AND MISCELLANEOUS MECHENICAL WORK FOR KATARGAM SWIMMING POOL AT T.P.S. NO. 03 (KATARGAM), F.P. NO. M-08 IN NORTH ZONE, SURAT

NAME OF WORK: PROVIDING GROUND DEVELOPMENT WORKS, ELECTRICAL WORKS & MISCELLANEOUS

MECHENICAL WORK FOR KATARGAM SWIMMING POOL AT T.P.S. NO. 03 (KATARGAM), F.P. NO. M-08 IN NORTH

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift, watering

etc. Comp. (A) Loose or Soft soil With Machinaries

(1) Up to 1.5 Mt. depth 0.00 123.13 C.M.

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

2 SMC (2) excavated stuff upto 50 mt. Lead & all lift, watering

etc. Comp. (A) Loose or Soft soil-With Manual

(1) Up to 1.5 Mt. depth 80.00 212.52 C.M.

Providing & filling in plinth with yellow soil or

3 SMC (11) selected soil in layers of 20 C.M.. Th. Incl. watering, 119.00 301.78 C.M.

ramming & consolidation etc. complete.

Boring holes 3.5 mt. deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

surplus excavated soil as directed within a lead of

M. for following diameter of piles.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand

:6 Crushed stone agg 20m.m Nominal size)&curing

comp. excl. cost of form work in :(a) foundation

Providing & laying cement concrete 1:1.5:3 (1

cement : 1.5 sand : 3 graded stone agg. 20 mm

nominal size) & curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm

7 SMC (7) nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08s.mt 0.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

(1) Having c/s area up to 0.08s.mt 0.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing & fixing IS Mark TMT Bar FE 500D

reinforcement for R.C.C. work incl. bending, binding

& placing in position etc. comp. Upto G.L./P.L.

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm

9 SMC (7) nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08s.mt 0.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

(1) Having c/s area up to 0.08s.mt 0.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

(C)Coping 5.00 6642.95 C.M.

Providing & fixing IS Mark TMT Bar FE 500 / FE

500d reinforcement forR.C.C. work incl. bending,

binding & placing in positionetc.comp.---

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

11 SMC (16) in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) 52.00 4,729.83 C.M.

Providing & Applying 20mm. Th. Heavy Roller plaster

on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3

(1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

12 1:1 (1cement: 1 sand) apply thick cement slurry and 459.00 324.00 S.M.

apply roller horizontal as

well as vartical ( two times ) up to good quality and

size of grain in

elevation as per directed by engineer incharge.

SMC (30) Providing 20 mm deep finished groove in plaster

(MR) in line and level etc. Comp. For all Floor

Providing & applying two coats of weather shield

max paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade

and colour approved by architects, on exterior

surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete

SMC and as directed by the architects and manufacturers.

Colour Surface Preparation :

Work surface is thoroughly clean, dry and free from all

(17) (MR) loose dirt, chalk, grease, fungi, algae and flaking paint.

This can be achieved by brushing with a wire/ stiff

coir brush, followed by water jetting if required. Fill

up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

Priming: PART A:- COMPOUND WALL

Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours. Application of putty is

not recommended. 558.81 82.00 S.M.

Minimum 4-6 hours duration is required between

each coat of weather shield max paint

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common

raffers & the like.

Applying Priming coat over new steel and other

metal surface after over and including preparing the

surface by throughly cleaning oil, grease dirt and

16 Colour 35.00 36.74 S.M.

other foreign matter and scoured with brushed fine

steel wool, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coat (excluding priming coat) on

SMC new steel and other metal surface with synthetic

17 Colour enemal paint, burshing to give an even shade 35.00 68.57 S.M.

Work (8) including cleaning the surface of all dirt, dust and

other foreign matters.

SMC(150) Decorative theme base designing & painting with all

MR waterproof materials

PART B:- GROUND DEVELOPMENT WORKS

Box Cutting the road surface to proper slope and

camber for making base includinng removing the

19 Devlopme 410.00 109.41 C.M.

excavated stuff and depositing on the road side slope

as directed up to 50 mt. lead.

Providing and laying cement concrete pavement

using M30 grade concrete and vacuum dewatering

technique, including floating the surface with a skim

powder densifier (having high mechanical strength

and resistance to abrasion, applied by sprinkling

method at 3–5 kg/m²), and using Racron 35 fiber at

20 RA-1 120 gm /bag, etc.completed strictly as per the 72.00 7257.85 C.M.

instructions of the E.I.C. In seprate bay (Single/Odd-

Even) method only with expansion joint and R.C.C

groove cutting with in 24hrs. With Optimum water

cement ratio as per IS Requirements for Road

construction.Water cemet Ratio lies 0.40 to 0.45 &

Providing & fixing IS Mark TMT Bar FE 500 / FE

500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto

Providing & filling in plinth with yellow soil or

22 SMC (11) selected soil in layers of 20 cm. Th'. Incl. watering, 94.00 301.78 C.M.

ramming & consolidation etc. complete.

SMC Preparation of subgrade with Compacting,

Ground Levelling and consolidation of subgrade with

23 Develop- miniroller/plate vibrator machine including watering 281.93 4.93 S.M.

ment and filling in depressions which occur during the

Works (2) process as directed by engineer-in-charge.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing & laying Granular sub base (GSB)

confirming to Grading-II of Table 400.0 of compacted

SMC thick of 150mm with specified graded stone metal

Ground and sand mixed in place and laid with mechanical

24 Develop- means spreading with motor grader and compacting 40.00 1469.00 C.M.

ment with vibratory roller having minimum 80-100 KN

Works (9) static weight to acheve desired density of 98% of

MDD including all material, labour, machinery with

all leads and lift etc. complete.

Develop- Providing and laying 200 micron plastic sheet on

ment prepared sub base For V.D.S Concrete

Providing & laying C.C 1:3:6 (1cement :3 coarse sand

:6 Crushed stone agg 20m.m Nominal size)&curing

comp. excl. cost of form work in :(a) foundation &

SMC Supplying & filling fine sand (pana) in 150 mm

Ground compacted thickness over the base including

27 Develop- necessary compaction, watering etc. complete. Item 3.00 413.09 C.M.

ment includes leveling by using vibratory plates compacted

Works (4) machine and as directed by engineer in charge.

Providing & fixing interlocking type Cement Concrete

SMC paver block of approved shape & design having

Ground mm thickness (M-50) purchased from SMC's

Develop- approved paverblock manufacturer only on fine sand

ment bedding. Item includes leveling by using vibratory

Works plates compacted machine. Item also includes all

(8)(MR) materials, Labour, euipments, tools, plants, watering,

cleaning etc. complete.

Cutting of Groov 5.00 mm wide in VDS for depth of

250.00 mm of total thickness making bays of 4.0 mtr

29 x 4.0 mtr. Using groove cutting machine with 200.00 50.00 R.M.

diamond cutting wheel and filling of sealent etc.

complete as per directed by Engineer in-charge

Providing 100mm thick readymade C.C. kerb of

strength M-20 (size 300mm x 380mm) purchased

SMC from SMC's approved paverblock manufacturer &

Ground setting in line, level and in truly vertical position,

30 Develop- including filling joints in C.M. 1:1 (1 part of cement : 1 160.00 228.00 S.M.

ment part of stone dust) smooth pointing in C.M. 1:1 (1

Works (6) part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by engineer in

For rounding at the edge of footpath (For fanning

Providing and laying chequered precast concrete

tiles 40mm thick with aggregate of sizes upto 6mm in

floors on average 60mm thick bed of C.M. 1:6 (1

cement : 6 sand) jointed with neat cement slurry with

pigments to match the shade of the tiles. (400mm x

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M20/M25/M30/M35 Design

mix concrete as per IS 456:2000 (latest revision) and

as per tender specification in all items including cost

of form work and rendering but excluding cost of

reinforcement. (A) foundation, footing,

base of columns and mass

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing and mixing approved liquid plasticizer

admixture conforming to IS 9103, compatible with

cement, to improve workability, cohesiveness, and

strength of concrete/mortar without increasing

water content, at a dosage of 300 ml per 50 kg bag of

33 RA-3 cement, including cost of material, handling, accurate 100.00 53.00 Lit

measurement, mixing in concrete/mortar, and all

leads, lifts, tools, labour, curing assistance, wastage,

and incidentals, complete as directed by the Engineer-

PART C:- HORTICULTURAL DEVELOPMENT

SUPPLYING OF PLANTS

34 Trees (Ht. 8' to 10') 50 150.00 Nos.

Shrubs (Ht. 1' 6" to 2') 150 15.00 Nos.

SUPPLYING SPREADING & MIXING OF

Supplying and spreading of good quality garden soil

35 (free from inert materials) suitable for healthy 56.00 350.00 C.M.

growth of plants.

Supplying, stacking and spreading of good quality

36 organic as well as inorganic manures and fertilizers

and necessary soil conditioners and amendments

A) Neem cake 20.00 7.00 Kg.

B) Castor cake 20.00 6.00 Kg.

D) Vermicompost 25.00 4.00 Kg.

E) D.A.P. fertilizer 10.00 29.00 Kg.

F) Organic Mix Fertilizers 10.00 7.00 Kg.

PART D:- OTHER WORK

Providing corrugated G.I. Sheets of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8m diameter with bitumen and G.I. limpet

37 SMC (103) washer or G.I. limpet washer. filled with white lead 80.00 1016.00 S.M.

complete excluding the cost of purlins, Rafters and

Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

Boring holes 3.5 mt. deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

surplus excavated soil as directed within a lead of

M. for following diameter of piles.

Providing & laying cement concrete 1:4:8 (1 cement :

4 sand : 8 graded stone agg. 40 mm nominal size) &

curing comp. incl.cost of form work in (A) Foundation

Providing & laying cement concrete 1:1.5:3 (1

cement : 1.5 sand : 3 graded stone agg. 20 mm

nominal size) & curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing & laying cement concrete 1:1.5:3 (1

cement : 1.5 sand : 3 graded stone agg. 20 mm

nominal size) & curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

(1) Having c/s area up to 0.08s.mt 0.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

(1) Having c/s area up to 0.08s.mt 4.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

Providing & fixing IS Mark TMT Bar FE 500 / FE

500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto

Providing and Fixing Hollow steel Sections Framed

Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineerin-

charge.TATA / JINDAL / ASIAN Make

Painting two coat (excluding priming coat) on new

SMC steel and other metal surface with synthetic enemal

44 Colour paint, burshing to give an even shade including 15.00 68.57 S.M.

Work (8) cleaning the surface of all dirt, dust and other foreign

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall

be concealed as directed including necessary fittings

etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including

cost of all materials.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C.

work incl. boxing, centering, vibrating, curing &

mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral

water proofing admixture

as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the

manufacture of the water proofing material, concrete

work for top, bottom slab & side pardi for Under

ground Tank & Item incl. Necessary excavation &

46 SMC (60) refilling the available earth, 15 cm th' C.C 1:4:8 for

bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water

proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out pipe

arrangement as necessary & C.I. Cover 0.60 x .045

weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineerin-

charge including outside plster work

Underground tank 100000.00 6.87 Lit

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing and filling Epoxy grout of approved or

47 RA-14 suggested brand by consultant Engineer incharge in 10062.00 21.00 R.M.

2mm to 3mm thick tiles joint including spacer with

cleaning of joint by vacuum or blower etc .

Providing & applying two coats of weather shield

max paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade

and colour approved by architects, on exterior

surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete

SMC and as directed by the architects and manufacturers.

Colour Surface Preparation :

Work surface is thoroughly clean, dry and free from all

(17) (MR) loose dirt, chalk, grease, fungi, algae and flaking paint.

This can be achieved by brushing with a wire/ stiff

coir brush, followed by water jetting if required. Fill

up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed

together at the ends by end locks mounted on

49 specially designed pipe shaft with bracket plates, 19.00 4546.01 S.M.

guide channels and arrangements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete. (B)

Shutters having width 3.5 M and above

Supply, installation, testing, and commissioning of a

mechanical handle device for manual operation of

50 RA-4 rolling shutters, SHUTEBLE UP TO 6M WIDTH 1.00 7550.00 Nos

including all necessary fasteners, brackets, and

Providing and laying flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface

using white cement including rounding off junctions

and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

Providing – supplying & fixing top & bottom

aluminum frame (50 x 25) 0.95 mm thick & central

lock frame with ( 75 x 25 ) 1.03 mm thick color

52 RA-5 anodized with 4 mm thick ACP (Exterior grade plain 31.00 2580.00 S.M.

colors) with aluminum anodized aldrop, stopper &

fixing with S.S screws etc all per directed by engineer

Supply, installation, testing & commissioning of

shower with chrome- plated fitting comlete with

accessrios and plubing as connection (JAQUARED

Removing and scraping of old deteriorated plaster of

any thickness from wall / RCC member including

54 Demolitio 363.36 20.55 S.M.

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing & Applying 20mm.to 35mm Th.(Max.

35mm thickness consider) Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting

of 12 mm av. Th. Backing coat of C.M. 1:3 (1

cement:3 sand : racron 3s ( 0.5 nos per bag )) also

plaster master wterproofing chemical 100 ml /bags

55 as per companey manual & approved by E.I.C or 363.36 417.00 S.M.

consultant & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply

roller horizontal as well as vartical ( two times ) up

to good quality

and size of grain in elevation as per directed by

engineer incharge.

Providing & applying two coats of weather shield

max paint (3 coats may be required in case of darker

colours.) of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade

and colour approved by architects, on exterior

surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete

and as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all

loose dirt, chalk, grease, fungi, algae and flaking paint.

56 This can be achieved by brushing with a wire/ stiff 363.36 82.00 S.M.

coir brush, followed by water jetting if required. Fill

up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours. Application of putty is

not recommended.

Minimum 4-6 hours duration is required between

each coat of weather shield max paint

Supply, Installation and Testing of: ABC Powder Fire

Extinguisher necessary hardware and consumables.

Stored Pressure Mechanism. Charged with MAP-50 %

(ABC) Dry Powder. With wall mounting clamp.

Standard: -Confirming to IS: 15683-2006 with ISI

Mark UOM:-Price Per Each No. Size:-6 kg Powder.

Supplying & erecting carbon dioxide (CO2) fire

extinguisher user of following capacity with

58 necessary clamps made from 50 x 6 mm M.S. Flat 4.00 7777.00 No.

with nut & bolts grouted in wall complete.[A] For

59 HOSE REEL DRUM SET :-

Supplying and installing testing and commissing of

wall mounting swinging hose reel drum as per is

and fitted with 20mm dia x 30meter long high

pressure rubber hose pipe with pvc shut off nozzle

with necessary ms bracket for holding hose reel

(make: - aaag / newage-surendranagar)

60 HOSE PIPE :-

Providing and fixing of rrl fire hose of 63mm dia x

meter as per is:636, type-a, isi marked with ss-304,

63mm male & female coupling as per is:903, isi

marked banded with copper wire.

(make:- aaag / newage-surendranagar)

PART:- E MISCELLANEOUS WORK

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Food Grade Epoxy Paint Providing & applying two

pack food grade epoxy paint of approved brand &

manufacturer’s specification and direction of

Engineer-in-charge to interior surface of RCC

(including overhead/underground tanks) after

preparing the surface by proper & approved methods

for thickness of DFT of 150–200 microns, smooth,

hygienic, non-toxic, potable water safe, complete as

per manufacturer’s specification and direction of

Engineer-in-charge.

1) Surface Preparation

Remove rust scale, grease/oil and old paint by wire

brushing, grinding or sand blasting.

Ensure dry,dust free surface (curing completed).

For R.C.C. concrete, cure at least 28 days of age.

Remove loose particles, laitance, dust, dirt, grease.

Fill cracks > 0.30 mm with PMM.

Clean the tank thoroughly and apply primer coat

Allow 8–12 hours drying.

3)Apply intermediate coat, allow proper drying.

4)Apply final coat for smooth hygienic surface.

5) Concrete Ventilation in closed tanks

Comply with manufacturer’s curing

recommendations.

6)Fill tank only after curing (7 days, 25°C).

Min. Requirements of Material

Adhesion ≥ 2 N/mm² (ASTM D4541)

Chemical Resistance against standard cleaning agents

& mild alkalis.

No toxic / portable water safe (NSF, FDA standards)

Abrasion Resistance – high for durability

Water absorption – negligible

Smoothness – non-porous, easy to clean

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary

62 SMC (120) accessories & stainless steel dash fasteners , stainless 250.00 450.00 K.G.

steel bolts etc., of required size, on the top of the floor

or the side of waist slab with suitable arrangement as

per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

Providing and fixing 1mm thick M.S. sheet sliding

shutters with frame and diagonal braces of 40 x

x 6 mm angle iron, 3.15 mm M.S. gusset plates at

R&B Junctions and corners 25 mm dia. pulley, 40 x 40 x

(11004A) 6mm angle and T-iron guide rail at top and bottom

respactively with handles, stoppers and locking

agangement etc, including applying a priming coat

of red lead paint.

Sealing of crack / porous concrete with Epoxy Grout

by injection through nipples complete as per

EICSupply of polyurethane injection grout, moisture-

activated, for crack injection and sealing works,

including application and testing as per

manufacturer’s instructions and approved method..

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing, drilling, fixing and removing mechanical

injection packers made of Mild Steel / Carbon Steel /

Aluminum for pressure grouting in concrete

structures, including expansion rubber sleeve, non-

return valve, drilling of holes, cleaning with

air/water, tightening, fixing, removal after

completion of grouting, surface finishing, and all

materials, labour, tools and equipment complete as

per specifications and direction of Engineer-in-

Providing and fixing Towel Ring fabricated from

seamless stainless steel tube 2mm thick in bath room

with polished wall flange at end of bars with heavy

66 Sanitary 5.00 924.24 NOS

duty anchor fasteners & accessories. Make- Cera

F5014115CH, Parry ware F5014115CH, Jaqua ACN-

1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long

approved make including, providing & fixing C.P.

brass screws, making holes in walls & making good

67 Sanitary 20.00 1100.42 NOS

Make- Cera F5015103CH, Parry ware F880005T,

,HindWare F880005T.

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per

the type design in brick masonary in C.M. 1:5 and

inside and outside 20mm thick plastering in C.M. 1:3

necessary 100mm coping with reinforcement in RCC

M-200, providing and fixing C.I. steps and fixing

68 manhole frame and covers (But excluding supply of

manhole frame and covers) over manholes and house

connection chambers and fixing manhole covers (but

excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety

chain wherever necessary as per the stiputations in

the type design complete as per latest CPHEEO

manual. (excl. excavation).

(A) Manhole type "A" circular type having inside

diameter of 1200mm for depth upto 1.5 m depth (for

150mm to 500mm dia sewer)

1. Manhole type "A" as above for 1.0 M depth 5.00 11760.00 Nos.

2. Extra depth beyond 1.0 M but upto 1.5 M depth for

"A" type manhole

Providing & construction simple chamber of 23 cm.

th' B.B. Masonary in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

69 SMC (76) Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm & 450 mm deep for single

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall

be concealed as directed including necessary fittings

etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including

cost of all materials.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Providing & Fixing gun metal check or Non return full

way wheel valve at all floors levels, etc.complete.

(A) 15 mm dia 20.00 200.00 NOS

(B) 25 mm dia 20.00 300.00 NOS

(C ) 40 mm dia 4.00 450.00 NOS

Providing & Fixing abonite ball cock of approved

qualities directed etc. comp.(A) 25 mm. dia.

Providing, supplying and fixing 25 mm thick FRP

(Fiber Reinforced Plastic) molded grating with anti-

skid surface for swimming pool deck/overflow gutter

area including cutting, edge sealing, SS fixing clamps,

supports and complete as per drawings and direction

of Engineer-in-charge.

Supplying and erecting floor mounting stand for

keeping four nos. of FIRE buckets comprising

1500mm in lenght, 900mm height frame made out of

74 30mm x 30mm x 4mm angle from with cross 2.00 930.00 NOS

supports for legs, welded with 4 hooks and duly

painted with one coat of red lead and two coats of

approved enamelled silver paint.

Providing & laying river wash 18 mm / 20mm thick

granite stone flooring /dado/elevation in required

size, design & pattern as per linear as well as

curvilinear portions. All complete as per detailed

drawing. (Laid on screed as paid separately.) Tiles

laid with high – performance, deformable gray or

75 RA-10 white cementitious adhesive with extended open 94.00 3635.10 S.M.

time with high wetting capacity (chemical as directed

by engineer in charge only). Rate also including

minimum 2 mock ups for approval, as directed by

engineer in charge only.

(Basic rate 1990.60 Rs/Sq.mt)

(Mode of measurement –only in Sq. Mt only )

Providing, supplying and installing 16 ft (4.8 m) long

rectangular FRP diving board, blue color, complete

with hot-dip galvanized / stainless steel base stand,

76 RA-12 anchor bolts, non-slip surface, hardware and 1.00 74336.00 NOS

accessories, fixed over RCC diving platform as per

manufacturer’s recommendation and direction of

Engineer-in-charge.

Providing, supplying, installing, testing and

commissioning of Heavy-Duty Swimming Pool Diving

Platform complete with Stainless Steel Base and Non-

77 RA-13 Slip Diving Board, suitable for training, recreational 5.00 23669.05 NOS

use, and competition pools, complete in all respects

as per manufacturer’s specification and as directed

by the Engineer-in-Charge.

78 SMC (42) Labour Charges For Edge Finished For Granite 41.00 43.43 R.M.

Mechenical Work

Providing and supplying C. I. pipes for following

nominal bore diameter with internal cement modar

lining including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc. complete (IS 8329-2000). Size 150 mm

Providing and fixing Mild Steel (MS) Butt Weld

Elbow, 150 mm dia, of approved make, conforming to

relevant IS standards, suitable for the specified

working pressure of water supply / fire / utility

pipelines. (Make:- Zenith / Jindal / Sant) Size:

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Supply, installation, testing, and commissioning of

MS B/W Reducer (Concentric/Eccentric) with

81 flanged ends, including all necessary gaskets, bolts, 4 1091.81 Nos.

nuts, pipe fittings, and consumables, installed as per

piping layout and IS standards. Size: 150 X 100 MM

Supply, installation, testing, and commissioning of MS

B/W Reducer (Concentric/Eccentric) with flanged

82 ends, including all necessary gaskets, bolts, nuts, pipe 2 1509.95 Nos.

fittings, and consumables, installed as per piping

layout and IS standards. Size: 200 mm X 150 mm

Supply, installation, testing, and commissioning of

150 mm MS Tee for piping systems, including all

bolts, nuts, welding preparation, and accessories

required for proper installation and operation.

Supply, Installation and Testing of: C.I Foot Valve

(Ball type or Swing type) with necessary pipe

fitments, hardware and consumables. MOC:-Body:

Cast Iron (With Flange Ends). Standard: ISI Marked.

UOM:-Price Per Each No.

Size: 300 mm dia

Supply, installation, testing, and commissioning of C.S

Gate Valve with all gaskets, bolts, nuts, lubricants, and

consumables, as per IS:5152 (latest) and piping

layout, including proper alignment, leak-proof

installation, and hydrostatic/operational testing.

Size: 150 mm dia

Supply, installation, testing, and commissioning of C.S

Gate Valve with all gaskets, bolts, nuts, lubricants, and

consumables, as per IS:5152 (latest) and piping

layout, including proper alignment, leak-proof

installation, and hydrostatic/operational testing.

Size: 100 mm dia

Providing, supplying, installing, testing and

commissioning of Air Blower System of specified

capacity and pressure, complete with motor, base

frame, coupling, accessories and control panel,

including all taxes, insurance, transportation, loading,

unloading, erection, alignment, trial run and

commissioning, complete as per specifications and as

directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of

flange ends Expansion Bellow as per EJMA standards

of overall length of minimum 150 mm, designed for

15 mm axial compression and 5 mm axial extension

with tie rods etc. of following MOC & pressure

Supply and Fixing of Overflow gratings, made of

polypropylene (PP), 33 units= 1 meter. Size:

mm*24 mm HT Height. Black / Brown / White

Colour. Colour Selection will be as per prior approval

of engineer in charge. Make: Aqua, Certikin, Pool

Aids, Magnapool

Supply, Installation, Testing and Commissioning of

90 Standard/Overflow Type Ladder in SS 304 as MOC, 5 2.00 23400.00 Nos.

step. Make: Aqua, Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

91 Standard/Overflow Type Ladder in SS 304 as MOC, 4 2.00 19760.00 Nos.

step. Make: Aqua, Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

Trolley Mounted Cleaning System consist of

industrial grade cartridge filter, 2 HP Pump with Pre

Filter, with all electrical conneciton like starter for

on/off along with necessary piping and 20-30 m

cable length. Supplied with necessary control valves

and NRVs with ss nut bolts, washers, flanges etc. for

pool cleaning. Make: Aqua, Certikin, Flow Dynamics

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND

Supply, Installation, Testing and Commissioning of WALL

Vaccume Head, 600 mm width, fixed with clip type

connection of 1-1/2". Make: Aqua, Certikin, Pool Aids,

Supply, Installation, Testing and Commissioning of

94 Reinforced Telescopic Handle, 9 m long. Make: Aqua, 1.00 6175.00 Nos.

Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

Floating Suction, made of polyethylene in blue colour,

connection : 38 mm, 30 m Long. Make: Aqua, Certikin,

Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

96 Deep bag skimmer, 40mm Clip type connection. 1.00 1560.00 Nos.

Make: Aqua, Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

Test Kit for measuring Chlorine & pH Levels in pool

Make: Aqua, Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

98 Curved brush 18" plastic. Make: Aqua, Certikin, Pool 1.00 1560.00 Nos.

Aids, Magnapool

Supply, Installation, Testing and Commissioning of

99 Straight brush 10" plastic. Make: Aqua, Certikin, Pool 1.00 936.00 Nos.

Aids, Magnapool

Supply, Installation, Testing and Commissioning of

100 Water Surface skimmer, 40mm Clip type connection. 1.00 1131.00 Nos.

Make: Aqua, Certikin, Pool Aids, Magnapool

Supply, Installation, Testing and Commissioning of

UPVC/CI/Bronze Valves like Ball Valves, Butterfly

Valves, Non Return Valves with fittings like nut bolt,

washer, gasket, flanges, tail piece and other fittings as

per design accordance. Make : Astral, Zoloto, Audco,

Butterfly valve : 4" 1.00 9524.00 Nos.

Butterfly valve : 6" 3.00 14027.00 Nos.

Butterfly valve : 8" 3.00 30400.00 Nos.

Non Return Valve : 6" 3.00 18294.00 Nos.

Non Return Valve : 8" 2.00 37869.00 Nos.

Non Return Valve : 1 1/2" 3.00 2962.00 Nos.

Ball Valve : 1/2" 4.00 164.00 Nos.

Ball Valve : 1 1/2" 4.00 611.00 Nos.

Ball Valve : 2" 4.00 663.00 Nos.

Filling in foundation and plinth with murrum or

102 selected soil in layers of 20cm. thickness including 666.40 289.08 C.M.

watering, ramming and consolidating etc. complete.

Opening and Reinstallation, Testing and

Commissioning of Vertical Bobbin Wound Sand Filter

manufactured with filber glass and polyester resin,

totally anticorrosive fitted with collector arms &

diffuser made in UPVC and polypropylene, resistant

to salted water.Filter will be supplied with nozzle

plate, sight glass, manhole, pressure gauge. Working

Pressure. 2.5kg/cm2 - 4kg/cm2, Test Pressure:

kg/cm2 - 5.5kg/cm2, maximum tempreture:50

degree C,complete in accordance to the

manufacturers specifications. Diameter: 2000 mm,

Filtration Velocity: 30 m/hr, Flow Rate: 92.67 m3/hr

Supply, Installation, Testing and Commissioning of

Activated Filter Media.

Opening and Reinstallation, Testing and

Commissioning of Manually operated 5 valve

105 batteries built entirely in UPVC with 150 mm flanged 1 38464.50 Nos.

connnection to filter. Butterfly valves is also in CI.

Supplied with required supports in SS and clamps.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

Supply, Installation, Testing & Commissioning of

Single Stage Centrifugal Back Pull Out Type

Horizontal Industrial Type Pump, set with cast iron

body, CI impeller, 45C8 Shaft, with TEFC 1450 RPM

prime mover suitable for 415 V, 50Hz, 3 phase AC

power supply with base plate, coupling, guard

complete with IP 55 Protection, Class F insulation,

Continious Operation. Supplied with pressure gauge

and skid in MS in accordance with technical

specification (2 Working + 2 Standby). Capacity:

HP, Flow Rate: 92.67 m3/hr @15 m

Make : Kirloskar, Aqua, Certikin, Magnapool

Opening and Reinstallation, Testing and

107 Commissioning of PP basket strainer for recirculating 1 16900.00 Nos.

Opening and Reinstallation, Testing and

Commissioning of Electrical Panel for Recirculating

Pumps, Ozone Pump, UV System and Dosing Pumps

of Integrated, Cubical type dead front extensional,

SWG CRCA sheet steel control panel to the

108 foundation. The Control panel should be suitable for 1 14690.00 Nos.

440 volts, 50 hz 4 core supply. Panel should consists

of necessary MCBs, Contactor, Overload Relay, Single

Phase Preventor, Cabling with cable tray and

terminal, Fan, Lamp, Push botton, Lugs etc. as per

engineer in charge and as per design accordance.

109 Acid for pH Correction 100 37.00 Kg

110 TCCA in form of Granule 75 780.00 Kg

Supply, Installation, Testing and Commissioning of

Dosing pump of 0-10 LPH at 5 Bar pressure for Alum

Dosing with 100 L storage Tank (IP-65)

Make : Aqua, Certikin, Magnapool

Supply of Chlorine Gas Cylinder.

Capasity : 100 kg.

Supply, Installation, Testing and Commissioning of

113 Floor Inlets, made of ABS white plastics. Flow Rate: 5 6 832.00 Nos.

m3/hr. Make: Aqua, Certikin, Pool Aids

Supply and fixing of False Start Indicator for 50 m

114 Width Pool. Make: Aqua, Certikin, Pool Aids, 1 26000.00 Nos.

Supply and fixing of Back Stroke Indicator for 50 m

115 Width Pool. Make: Aqua, Certikin, Pool Aids, 1 26000.00 Nos.

Supply, installation, testing and commissioning of

116 SS304 Puddle Flange for all pump suction at

Balancing Tank Pardi in plant room.

Supply, installation, testing and commissioning of

Electrical cables for All pumps or eq. with HDPE

Conduit / Electric cable.

Make : Polycab, Havells, RR Kabel, Finolex

1.5 sqmm x 3 Core (Oxygen concentrator, Ozonator

and Chlorination System)

1.5 sqmm x 4 Core (Ozone Pump and Chlorination

2.5 sqmm x 4 Core (Filter Feed Pump) 100 364.00 RMT

0.5 sqmm x 3 Core (Dosing System) 40 143.00 RMT

Supply, installation, testing and commissioning of

Cable Tray for Electrical Cable

Electrical Work

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

118 complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall

/ ceiling as per pipe erected with following type of

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

(f) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

Cat. III 4.00 497.37 Pt.

Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on

119 surface of wall / ceiling complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[a] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

Cat. III 8.00 732.81 Pt.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories

Cat. III 9.00 253.46 Pt.

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (1)

Supplying & erecting UPVC Mini trunking (PVC

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not below

124 12.5 mm in height as per IS with accessories of 50.00 30.30 Mtr.

PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of

following size .(2) 25 mm

Mains with 1.1 KV grade ZHFR PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor ZHFR

PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class

Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

126 (b) 2 wire 2.5 sq. mm (From LDB to SB and SB to SB ) 100.00 78.78 Mtr.

Mains with 1.1 KV grade ZHFR PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

127 2.5 sq. mm copper conductor ZHFR PVC insulated 100.00 107.06 Mtr.

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sqmm

Supplying and erecting Flexible PVC insulated multi

129 strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

(i) 2.50 Sq.mm 4 core round PVC sheathed 100.00 102.01 Mtr.

(f) 1.50 Sq.mm 4 core round PVC sheathed 50.00 64.64 Mtr.

(e) 1.50 Sq.mm 3 core round PVC sheathed 50.00 44.44 Mtr.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

Providing and erecting Approved PART A:- COMPOUND

make RCCBs WALL

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component for following

Max. rating erected as directed.

(ii) 40Amps. FP

Cat. III 3.00 2637.11 Ea.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

131 rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for

(b) sheet steel double door (IP-43)

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

132 A.C. system and having breaking capacity 10 KA to 7.00 112.11 Ea.

be erected in existing box. confirming to IS

8828/1996 with ISI Mark

(B) Add. for sheets Steel powder coated enclosure

suitable for incorporating One/Two nos. MCB

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

134 mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts 10 7746.70 Each

Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

135 consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.

Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia,

mm thickness with 200mmX200mmX12mm base

plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

Providing street light pole bracket consisting of Light

Class MS. pipe of 4.2 cms. outside dia. complete with

suitable M.S. sleeve tubing of approximate 45 cms.

and length suitable for 76.5 mm / 80mm. / require

size pole top having sufficient fastners for fixing the

brackets and having spread of 1 mtr. length with

suitable rise as per site condition & suitable welded

stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm bracket 1 Mtr

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of

size 60 x 60 x 120 cm. Deep in below ground level

137 with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) 4 1525.10 Each

high upper ground level with necessary curing and

finishing in approved manner. ( for 7.5 & 8/8.5 mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

138 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm 100 317.14 Mtr.

(C) 4 core 6 Sq. mm 100 597.92 Mtr.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II ) with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable

(B) 63mm outer dia 150 73.73 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 50.00 281.79 Mtr.

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

141 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm 250.00 124.23 Mtr.

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm 16.00 38.38 Ea

Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

143 crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Item S.O.R 2024-2025 & M.R.

SOR Description

No. Qty. Rate Unit Amount

PART A:- COMPOUND WALL