Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.7 L+₹3.5 L (13.5%)Rejected-Finance 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) CHILODA
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
REPAIR AND MAINTENANCE OF LT ELECTRIC SUPPLY AND ALLIED WORKS AT SWAC VSN GANDHINAGAR
2023_MES_598240_1
8918/2023-24/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
VSN
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) CHILODA
₹54,000
Yes
30 Jun 2023
25 May 2023
23 Jun 2023
25 May 2023
21 Jun 2023
8 Jun 2023
25 May 2023 - 7 Jun 2023
Amount
Excavation in trenches not exceeding 1.5m width and not exceeding 1.5m in depth and getting out in soft/loose soil for taking up/ laying cable/ pipe etc. complete all as specified and as directed.
M&L for dry sand cushioning to underground cable with screened, washed river sand, including punning gently complete all as specified and as directed. Note:- Thickness after punning will be measured for payment.
Supply and lay burnt brick sub class `B' old size in trenches abouting each other width equal to length of brick etc complete all as specified and as directed.
Supplying and laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250 mm x 150 mm x 40mm complete all as specified and directed by Eng-in-Charge.
Returning, filling including spreading, leveling watering & well ramming in laying not exc. 25cm thick for soft/ loose soil complete all as specified and as directed.
Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and as directed.
Laying only burnt bricks (old size) retrieved from Item Nos. 11,12 and 13 here-in-after laid in trenches as cable protection complete all as specified and as directed.
Labour only for boring under road/ drain by manual method for inserting the light grade pipe GI tubing up to 50mm dia for cable protection complete all as specified and as directed by Engineer-in-Charge.
Supply and laying in trenches in road cross/ floors 40mm bore tube galvanished iron light grade with all fittings for protection of cable complete all as specified and as directed.
Supply and laying in trenches in road cross/ floors 50mm bore tube galvanished iron light grade with all fittings for protection of cable complete all as specified and as directed.
Taking down/ out underground cable of aluminium conductor of 10 to 35 Sqmm of any core after disconnecting from sheet metal encloser/ panel board or pole complete all as specified and as directed.
Taking down/ out underground cable of aluminium conductor of 50 to 95 Sqmm of any core after disconnecting from sheet metal encloser/ panel board complete all as specified and as directed.
Taking down/ out underground cable of aluminium conductor of 120 to 300 Sqmm of any core after disconnecting from sheet metal encloser/ panel board complete all as specified and as directed.
Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 Volt grade of size 16 Sqmm, 2 Core laid in trenches/ passing through pipe/ duct or fixed on pole and connecting and testing complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 Volt grade of size 16 Sqmm, 4 Core laid in trenches/ passing through pipe/ duct or fixed on pole and connecting and testing complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 25 Sqmm, 4 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 35 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 50 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 70 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 95 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 120 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 150 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 300 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
S&F in repair 2.5 Sqmm, 3.0 Core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 Volts grade from junction box to street light fitting complete all as specified and as directed by Engr-in-Charge.
S&F in repair 1.5 Sqmm, 3.0 Core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 Volts grade from junction box to street light fitting complete all as specified and as directed by Engr-in-Charge.
M&L for load balacing at different control panels of street lights at different locations of HQ SWAC Chiloda by proper R, Y, B phase sequencing of the street light fittings so that the load in each phase will be equal and unbalace of load in any of the phase be sorted out the test report before and after balancing will be submitted by the contractor complete all as specified and as directed by Eng-in-Charge.
S&F in repair PVC MCB DB 2 way with MCB SPN 6 to 32 Amps, 230 Volts, including taking down of old unserviceable DB complete all as specified and as directed by Engr-in-Charge.
S&F in replacement LED 12 V, 3X3 W colourful water proof underwater submersible fountain lights in RGB combination of colours, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair SMPS (rain proof LED power supply) input supply AC 190 to 260 Volts and out put voltage 12 Volts DC + 5% Out put power 500 Watt complete all as specified and as directed by Engr-in-Charge.
M&L for servicing and repair of printronix brand straight running target type MTST2009 moving target machine including servicing of all components including TGM 301, TGM 302, BSR, plug in relay, brush holder, limit switch, PCCU, LCU, motor winding and all other associated services with the machine like railway track -18 mtrs in length complete all as specified and as directed by Engr-in-Charge.
S&F in repairs digital voltmeter 0-500 Volts of size 96mm x 96mm complete all as specified and as directed by Engr-in-Charge.
S&F in repairs digital ampere meter 0-500 Amps of size 96mm x 96mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed by Engr-in-Charge.
S&F in repairs tripple pole and neutral enclosure with three pin and earth plug and socket complete with one triple pole MCB 63 Amps complete all as specified and as directed by Engr-in-Charge.
M&L for servicing and any repair of sliding door motors of Cap 3 HP, operated on 240 V, 50 Hz with replacing of box set-04 Nos, mechanical seal - 01 No, cut off switch - 01 No, bearing - 02 Nos, air filling in tank complete as per site requirement or as directed by Engr-in-Charge.
Dismantling old unserviceable bending/ broken PCC/ steel tubular pole of any size with necessary disconnection of electric wire, demolition of concrete foundation including excavation and earth work as required and removing the same from site complete all as specified and as directed.
S&F steel tubular swaged poles with two coat of aluminium paint ovar a coat of red oxide zinc chrome prime in externally exposed to view portion and black bituminous painting to intenal surface and portion embeded in concrete including making five alternative strips 30 cm wide in different colour above ground level or plinth level incl marking of MES pole No in black paint complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 mtr long) complete all as specified and as directed.
Comprehensive maintenance of sliding doors and repair/ replacement of unserviceable parts like LT control Panels, PCB, sensors and relays, wheels and supproting rollers, sliding door gear boxes, milled gear tooths, wiring, nut, bolts, washer, welding including greasing and oiling of rack and pinion gears and wheels of doors complete all as specified and as directed by Engr-in-Charge. Note:- Rate will be quoted including T&P, Hydra machine etc.
S&F in repair HMI display (Main Display) for 350 TR Chillar plant at HQ SWAC as per existing size and model A including calibration and taking down complete all as specified and as directed by Engr-in-Charge. Make : Daikin or equivalent as approved by GE.
M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation of pole, stays etc. complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping of pole etc. complete all as specified and as directed.
S&F in repairs mini limit switch (J-Lock, and J-8108 ) ME-8108 Type, 5 Amps 230 Volt, AC as per existing make and model complete all as specified and as directed by Engr-in-Charge.
M & L in replacement of chemical Earthing complete in repairs with copper earth plate 90 cm x 60 cm x 5 mm burried directly in ground vertically to a depth not less than 3.5 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to and including copper earth strip of 32X6mm dia by means of bolts,nuts, check nuts and washer etc made of galvanised iron and connected to earthing test point all as shown in electrical plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation/earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM jali weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 40 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead.
M & L in replacement of Earthing complete in repairs with galvanised steel earth electrode 60 cm x 60 cm x 6 mm burried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to and including galvanised earth lead as eGI strip of 32X6mm dia by means of bolts,nuts, check nuts and washer etc made of galvanised iron and connected to earthing test point all as shown in electrical plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation/earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM jali weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 40 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Necessary excavation wk is included in this item.
Supply and fix in replacement of Aluminiun strip of existing size 32 x 6 mm with saddles and fixing screws etc for earthing connection to bus bar trunking system of existing LT Panels at MAP power stations complete all as specified and directed.
Supply and fix in replacement of copper strip of existing size 32 x 6 mm with saddles and fixing screws etc for earthing connection to bus bar trunking system of existing LT Panels complete all as specified and directed.
S & F in replacement with terminal connections complete of required size aluminium lugs etc including taking down unserviceable MCCBs for the followings sizes :- MCCB FP 630 amp Adjustable type 50 KA
All as per item No 47 above here in before but MCCB FP 400 amp Adjustable type 36 KA .
All as per item No 47 above here in before but MCCB FP 250 amp Adjustable type 36 KA .
All as per item No 47 above here in before but MCCB FP 200 amp Adjustable type 36 KA .
All as per item No 47 above here in before but MCCB FP 100 amp fixed type 25 KA.
All as per item No 47 above here in before but MCCB FP 63 amp fixed type 16 KA.
All as per item No 47 above here in before but MCB TPN 63A, C Curve
S&F in repair 25 KVAR capacitor duty contactor , 240 volts, AC coil complete all as specified and directed by Engr in Charge.
Supply and fix in repair APFC controller for contactor switching with 1 CT Complete all as specified and directed.
S&F in repair cylindrical capacitor capacity 5 KVAR to 50 KVAR , 440 volts, 3 phase, 50 Hz complete all as specified and directed by Engr in Charge.
S&F in repairs Glow sign board of size 1.5 m x 0.9 m x 0.20 m made out of 1.0 mm thick tin sheet all side except front side aluminium beading "L" shape at all boarder exterier and interier side, front should be acrylic cover 2.0 mm thick of blue colour and written the subject matter as given by the Engr-in-charge in english capital letter in white colour with twin tubelight fitting 1x 20 watt (2 nos) including all electrical connection with surface conduit wiring 1.5 Sqmm ((length not exceeding 8 meter) copper wire with drilling and necessary required arrangement for fixing of board including testing as complete all as specified and directed by Engr in Charge.
Supply and spreading of aggregate of size 40 mm to 80 mm graded at electric supply sub stations at AF Stn Chiloda and MAP Sub Stns complete all as specified and directed.
S&F in repairs cage of wire mesh suitable for covering the outdoor transformers for monkey protection with all the four corner and top bottom angle iron framing of size 3.0 x 3.0 x 1.8 m suitable to be mounted on plinth of transformer and wire mesh net wire size 2.0 mm dia and wire mess square gap 20 mm with arrangement of hinged door on one side for opening and closing of the cage for maintenance of transformers with four no ring of size 25 mm dia and tickness 5.0 mm and made 10 mm hole for inserting the stud of size 5 cm long and 10 mm thick with suitable size bolt also welded in the bottom outer side for holding the casing including PCC 1:2:4 of 20 mm aggregate of size with one coat of red oxide primer and one coat blue colour paint complete all as specified and directed
Supply and fix in repair MS Chequered plates 5 to 8 thick or over in theckness avilable size duly painted with two coat of paint a red oxide primer and cut of shape for cable duct complete all as specified and directed by Engr-in- Charge.
S&F in repair 1100 volts grade heavy duty cable PVC insulated stranded 10 Sqmm aluminum conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connection complete all as specified and directed.
ALBA AC AND REF SERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .