REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION WORK AT DEAL AND IRDE AREA UNDER GE (I) R N D DEHRADUN

Amount

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch.

All as per Srl item No 2 above for point wiring for one light point controlled by two Nos two way switch omplete all as specified and directed.

All as per Srl item No 2 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches omplete all as specified and directed.

All as per Srl item No 2 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 2 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete. Make of cable and conduit: Havells/ Plaza/ Kalinga.

All as per Srl item No 2 above but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent omplete all as specified and directed.

S&F Modular switch single pole one way 6 amp complete. Make -Legrand / Anchor Penta/ Havells as approved.

S&F Modular switch single pole one way 16 amp complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F Modular switch , 6 amp, single pole, two way complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F Modular bell push, 6 amp 240 volts complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F door bell, AC, 240 volts, single pole complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete. Make -Legrand / Anchor Penta / Havells as approved.

S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete. Make -Legrand / Anchor Penta / Havells as approved.

S&F ceiling rose 3 plates polycarbonate, isolated body complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F Angle holder, insulated polycabonate body with back plate suitable for batten fittings suitable for One number LED lamp 9/10 Watt. Make of holder - Legrand / Anchor Penta / Havells.Note: The cost of LED Bulbs are not included in this item

S&F modular fan step regulator 120 W 2 module complete. Make: Legrand / Anchor Penta / Havells as approved.

S&F LED tube light batten fitting suitable for single T8 LED lamps complete all as specified and directed. Make: DMLN1LT8-16 of C&G or euivalent in Philips/ Havells/CG

S&F LED tube light 16 Watt T8 double sided connection with built-in driver, THD not more than 10% all as per C&G cat ref no LGT8-16-865-2 or equivalent in philips/Havells as approved.

S&F LED mirror light fitting, 10 watts, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre- wired including connecting to mains complete all as directed. Make- LDL-10-CDL of C&G or equivalent in Havells/Phillips

S&F integrated LED bulk head fitting 600 lumens, 6000 K comprises of pressure die cast housing, acrylic diffuser and frame IP 65 protection, IK-07 etc including connection complete all as directed.Make- LBHP-10-CDL of C&G or equivalent in Havells/Phillips as approved.

S&F Decorative, Wall mounting champagne gold finish fixture with plastic body suitable for LED lamp B22 base as per Havells cat ref no. LHFOECE1TZ1O014 or equivalent in Philips/C&S as approved.Note: The cost of LED Bulbs are not included in this item.

S&F recess mounting in built ,24 Watts,2'x2' LED ceiling light fitting with slim line extruded aluminium/ CRCA body, opal acrylic diffuser, electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- C&G Cat Pt No LCTLRNE-24-FO-CDL or equivalent in Phillips/Havells as approved.

S&F surface mounted in built , LED 18 watts, 1'x1' LED ceiling light fitting with slim line extruded aluminium/ CRCA body, opel acrylic diffuser, electronic driver etc and all accessories pre-wired including connecting to source complete all as specified and directed. Make- Crompton cat pt No- LCTLSNE-18-FO-CDL or equivalent model of Havells / Philips as approved .

S&F in replacement of unsv spn enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and neutral MCB 20 amp,240Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required.Make of SPN DB - Indo Asian/Legrand/Havells as approved.

S&F in replacement of UNSV tpn earth enclosure with triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 amp, 415 Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required.Make of TPN DB with MCB 63Amp - of Indo Asian /Legrand/Havells as approved.

M&L in replacement of unsv sub main wiring with submain wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed.

M&L in replacement of unsv sub main wiring with submain wiring using four single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories along-with two run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed.

S&F in replacement of UNSV vertical type load line distribution board ,double door, 4 way, AC 3 Phase 415 volt with TPN bus bar 250 Amps for each phase with 2 Neutral bar, 2 Earthbar and cable ties for cable management,fully insulted busbar & shrouded Neural bars ,improved Pan assembly for each insullation ,prefitted masking sheeet,reversible door for IP 43-"IK 09 with metal door with provision for DPX3 160 MCCB as incomer and SP/TP MCB's as out going complete all as specified and directed by Engr-in-Charge. Make of VTPN DB:-IndoAsian Cat Pt No. 811893/Havells/Legrand.

S&F in replacement of unsv MCB DB with MCB distribution board SPN, 240 volts, 4 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 42- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. Make: Legrand/ Havells/ IndoAsian as approved

All as per item No 30 above but SPN, 240 volts, 8 ways. Make - Legrand/Havells/IndoAsian as approved.

All as per item No 30 above but SPN, 240 volts, 12 ways. Make - Legrand/Havells/IndoAsian as approved.

Supply and fix in replacement of unsv MCCB with MCCB 4 pole,200 Amps 415 volts, 50 Hz having breaking capacity 25 KA , with thermal magnetic protection unit and testing Complete all as specified and directed. Make- IndoAsian cat part No. 830296 or equivalent in Legrand / Havells as approved by GE.

All as per item No 33 above but, MCCB 4 pole ,160 Amps Complete all as specified and directed. Make- IndoAsian cat part No. 830295 or equivalent in Legrand / Havells as approved by GE.

All as per item No 33 above but MCCB 4 pole,100 Amps Complete all as specified and directed. Make- IndoAsian cat part No. 830272 or equivalent in Legrand / Havells as approved by GE.

S & F in replacement of unsv MCB with MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 6 to 32 Amps complete all as specified and directed.Make - IndoAsian cat ref no 811144/46/48/49/50/51 or equivalent in Legrand/Havells as approved.

S & F in replacement of unsv MCB with MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete, all as specified.Make -IndoAsian cat ref no 811122/24/26/27/28/29 or equivalent in Legrand/Havells as approved.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

S&F in replacement of UNSV rigid non metallic 25 mm dia PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces completion complete all as specified & directed

S&F in replacement of switch socket combination 2 in 1, 3 pin, 5 and 15 Amp universal flush type 6/16 Amps with box (2 hole complete with suitable connection with 2x2.5sqmm and 1x1.5sqmm single core cable length upto 01 mtr Make Indoasian/Anchor Penta/Havells as approved.

S & F in replacement of unsv switch piano single pole flush type 6 amps, 230 volts complete,all as specified and as directed by Engr-in-Charge.

S&F in replacement of unsv socket out let 3 pin 6 Amps flush type complete, all as specified and directed by Engr-in-Charge.

S&F in replacement of unsv switch piano flush type single pole way 16 Amps complete, all as specified and as directed by Engr-in-Charge.

S&F in replacement of unsv socket outlet 2 in 1 3 pin 5/16 Amps flush type complete all as specified and as directed by Engr-in-Charge.

S&F LED Bulb 9 Watt B-22 Base Type suitable for mounting in Wall Mounting Decorative Fittings and Batten holders as mentioned in Item No 16 and 22 above.Make: Havells Cat Pt No. LHLDEUEEML8R009 or equivalent in phillips/Bajaj

S&F in replacement of UNSV PVC Casing Caping medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of size 25 mm.

Ansh Enterprises

M/s Ram Chander Gupta

Friends fire Engineers

JS CONSTRUCTION COMPANY

M/S BABA ENTERPRISES