REPAIR/REPLACEMENT OF JOINERY, ROOF, CEILING, SEWGAGE LINE, DRAIN, FENDING AND MISC B/R WORK AT CERTAIN OTM BLDG ZONE 2, ZONE 3A AND 3B AND ZONE 4 UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts,Complete all as specified and as directed by Engineer-in-charge.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts,Complete all as specified and as directed by Engineer-in-charge.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each,Complete all as specified and as directed by Engineer-in-charge.

Taking down of shutters of any description n.exc 1.00 Sqm and each,Complete all as specified and as directed by Engineer-in-charge.

M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamfered including dismantling old unserviceable board,Complete all as specified and as directed by Engineer-in-charge.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.Complete all as specified and as directed by Engineer-in-charge.

M&L Second class hard-wood in wrought scantlings in timber framed and fixed including dismantling old unserviceable,Complete all as specified and as directed by Engineer-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,Complete all as specified and as directed by Engineer-in-charge.

Supply and fix 35mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. .

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with/without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).Complete all as specified and as directed by Engineer-in-charge.

M&L in repairs Prelaminated particle board 18/19 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,Complete all as specified and as directed by Engineer-in-charge.

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed by Engineer-in-charge.

S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed by Engineer-in-charge.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.Complete all as specified and as directed by Engineer-in-charge.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.Complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.Complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.Complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.Complete all as specified and as directed by Engineer-in-charge.

S&F 200mm ordinary mild steel pattern springs including roller and roller plate Complete all as specified and as directed by Engineer-in-charge.

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed.

S & F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S & F in repairs aluminum mortice lock verticle type 75 mm 4 levers all as specified and directed

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring all as specified and directed

S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specififed and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters(two/three track), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including stainless steel wire mesh 0.36 mm nominal dia and average widht of aperture 1.40 mm and 4.0 mm plain glass etc.complete all as specified

S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws including 5 mm thick glass etc.complete all as specified

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Supply & Fix framed works such as grills grating,steel gates,ladders etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,Complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,Complete all as specified and as directed by Engineer-in-charge.

S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0.Complete all as specified and as directed by Engineer-in-charge.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in padding, hold fasts block filling, filling of steel chowkhats, coping or similar work Complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats.Complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.Complete all as specified and as directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 20 to 25mm thick laid over 20mm thick screed bed in CM 1:6 and jointed with cement slurry @ 4kg/sqcm.Complete all as specified and as directed by Engineer-in-charge.

M&L for machine cut kota stone slabas 20 to 25mm thick in dado/skirting over 10 mm thick rendering in CM 1: 4 and jointed with cement slurry @ 4kg/sqcm,Complete all as specified and as directed.

M/L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform.Complete all as specified and as directed

M&L 18-20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick rendering in CM 1:4.Complete all as specified and as directed

Material and labour for providing 50 mm thick cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base finished the surfaces even and rough to receive to topping layers Complete all as specified and as directed

Dismanting timber scantling under 40 Sqcm in secion In fillests, rails , posts, refters and purlins etc in any position in framed work or unframed work.Complete all as specified and as directed by Engineer-in-charge.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress including dismantling old unserviceable wall/ceiling.Complete all as specified and as directed

S& F in repairs of 4mm thick E Board decorative type 600 x 600 mm size in false in any type of frame work all as sepcified and drected

M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil.Complete all as specified and as directed

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.Complete all as specified and as directed

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofsm, walls etc fixed with 'L' type or 'J' type or cranked book bolts. Complete all as specefied and directed.

Material and labour for 6 mm thick asbestos cement, two piece adjustable serrated ridge for corrugated and semi corrugated sheets fixed with ‘L’ or ‘J’ type or cranked hooks bolts all as specified and directed.

S&F pre-painted galvatume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws.Complete all as specified and as directed

S&F pre-painted galvatume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws. Complete all as specified and as directed

Supply only integral water proofing compound all as specified..

M&L Three coats of white whash new plastered wall surfaces including preparation of new surfaces complete all as specefied and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 57 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 59 here in before but 20 mm bore.

Cleaning of septic tank, including pumping out the water from septic tank, scraping out sludge, organic materilas and removing solid & semi solid sludge to a distance exc. 50 Metre, but not exc 100 mtrs from the starting point and filling into shallows pits n. exc 1.5 Mtrs deep and returning, filling in, and levelling earth and spreading bleaching power around tank all as specified and directed for the following sizes including necessary earth work. 25 Users of Septic Tank

All as per item No 61 but 50 Users

All as per item No 61 but 100 Users

Opening and cleaning of soakage well of 50 users capacity by pumping out foul/dirty water into shallows pits n.exc 1.5 mtr deep and returning, filling in, and levelling earth including closing the soakage well after cleaning with water and spreading bleaching powder .Complete all as specified and as directed

Opening and cleaning of soakage well of 100 users capacity by pumping out foul/dirty water into shallows pits n.exc 1.5 mtr deep and returning, filling in, and levelling earth including closing the soakage well after cleaning with water and spreading bleaching powder .Complete all as specified and as directed

Cleaning of blocked / socked manholes incl removal of sludge/ dirt etc to a place n,exc 50mm incl removing and refixing existing man hole cover slab without damage and any depth of manholes etc Complete all as specified and as directed

Cleaning of sewage line of any diameter and of any description including manholes by manually or other means, to clear the sludge/blockage inside the sewage line and manholes and will be flushing with water to drain out sludge etc. inside the sewage line from manhole to ease the flow of sewage including removing the sludge and re- fixing the manhole cover all as specified and as directed by Engr-in-Charge.

Cleaning of nahni/floor/gully trap upto first manhole and removal of sludge etc all as pecified and as directed by Engineer-in-Charge.Complete all as specified and as directed

M&L broken bricks for loose filling with aggregates of gauge 80 to 150mm in soakage pits, soakage wells all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition and breaking-up of 150mm nominal dia unserviceable SGW, AC,PVC or re-inforcement concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and directed by Engr-in-Charge.

M&L P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and hunching against side of pipes after they are laid down and tested complete for 150 mm bore pipe complete all as specified and as directed.

M&L 150 mm internal dia salt glazed stoneware drain pipes , laid in trenches and jointed as specified all as specified and as directed

Demolition of cement concrete in ground floor and pavings n exc. 15 cm thickness (below or above the ground level) (Un-reinforced) and removing to a distance not exc 50 meter complete all as specified and as directed by Engr-in-Charge.

Dismantling fencing post, strut (wood, Steel or RCC) any section, including taking out embbed portion and making good disturbed ground embedded in concrete.Complete all as specified and as directed

Dismantling chainlink fencing, any thickness or mesh, fixed with steel fillet and nut bolt. N.exc 4KG per Sqm.Complete all as specified and as directed

Excavating in post holes(or similar holes) each 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good.Complete all as specified and as directed

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate) as in foundation Complete all as specified and as directed

S & F Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 (Gde E qty A).Complete all as specified and as directed

S&F (in repairs)Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured.).Complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.Complete all as specified and as directed

Supply only chain link fencing any size and type.Complete all as specified and as directed

S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length 4 CM.Complete all as specified and as directed

M&L prepration of new steel surface and applying two coats of synthetic enamel paint over one coats of red oxide primer preparation of new surfaces over 10 cm width on ginth.Complete all as specified and as directed

S&F mild steel TMT bar 10mm dia and over cut to length ben to shape reqd etc Complete all as specified and as directed

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 including demolation complete all as specified and as directed by Engr-in-Charge.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc.Complete all as specified and as directed

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth using extra cement complete all as specified and as directed. Note : WPC will be measured and paid for separately under relevent item.

S&F in repairs water closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonic pipe etc complete including trap set in and including necessary lean cement concrete complete all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

S&F in repairs of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. Complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.Complete all as specified and as directed

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Taking down Rain water pipe PVC (SWR) ,AC, and vent pipe of any size or pattern fixed in wall/floor including all fittings heads sohes bends as directed by Engineer-in-Charge complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor or fixed in wall 110mm.Complete all as specified and as directed

PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed in wall 75 mm.Complete all as specified and as directed

PVC (SWR) bends any radius 75MM bore,Complete all as specified and as directed

PVC (SWR) bends any radius,110 mm bore.Complete all as specified and as directed

PVC (SWR) junction single,(Single T) equal or unequal of 75 mm dia.Complete all as specified and as directed

PVC (SWR) junction single,(Single T) equal or unequal of 100 mm dia,Complete all as specified and as directed

Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

S&F in repair 20 mm dia CP curtain rod with two number of socket for door window openng,Complete all as specified and as directed

Cutting into existing manhole for connection new drain making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 75 mm to 150mm dia.Complete all as specified and as directed

M&L for 75mm thick cement concrete type C2, (1:3:6), 40mm graded aggregate as in plinth protection / foot path all as specified and directed

M&L 75 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S ROY TRADING

M/S Manjit Singh

Chinmay Traders

M/S SEWAK SINGH

M/S CHUNILAL SHOME