Janpad Pilibhit me Head Works Khand Sharda nahar Bareilly ke antargat duiteye Upkhand hetu karayalaya va Adhikari evam Karamchariyon hetu avason ke nirman karya.

Amount

Excavation of foundation in dry ordinary soil (loam clay or sand) including all lift and lead back filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth with removal and disposal of sur-plus earth as directed by the Engineer incharge with proper completion of work.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Part II 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm. (4) Treatment of soil along external perimeter of building 7.5 liters/sqm (5) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution) with proper completion of work.

Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors with proper completion of work.

R.C.C in 1:1.5:3 Mix (M- 20) cement. Coarse sand and Stone Grit 6 to 12 mm including cost of all steel, bending , Centering & shuttering Labour, material and T&P etc.All required for proper completion of work.

class 10 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.

Earth work in filling by power tranported earth with all lead lift including excavation, loading, unloading, manual compaction, dressing and all lifts complete as per direction of Engineer in charge including cost of all material, labour and T&P etc. with proper completion of work.

Sand filling in plinth under floors including Supply of necssary quantity of sand including watering, dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work.

Supply of mild steel or iron in plain work such as reinforce concrete or reinforced brick work (when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastages and over lapping and hooks

25 mm thick D.P.C. in C.C. 1:2:4 with cement, coarse sand & grit 6 to 12 mm size including water proofing compound in the proportion as specified by the manufacturers including cost of all materials, labour, T&P etc. with proper completion of work.

Painting in D.P.C. with two coat of airblown bitumen 85/50 or 85/25 @ about 1.7 kg/ sqm including cost of fuel if any with proper completion of work.

12 mm thick Plinth Plaster (1:4) with cement sand mortar up to 3 m. hight including cost of all labour, material and T & P etc. with proper completion of work.

12 mm thick Cement plaster on Brick masonry (1:6) with cement sand mortar up to 3 m. hight including cost of all labour, material and T & P etc. with proper completion of work.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1). Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness (DSR 21.3.1) Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 140 mm (DSR-2509) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (a) Sal wood (DSR-9.1.2) with proper completion of work.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing Window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). with proper completion of work.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (a) Single leaf with proper completion of work.

a).Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). b).Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness. c). Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 140 mm

Supply and fixing 6 mm thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. (Flooring/Wall tiles). (Size of tile 200x300 MM) with proper completion of work.

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). with proper completion of work.

Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T &P required for proper completion of work.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar ocations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (a) Area of slab over 0.50 sqm. with proper completion of work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) with proper completion of work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) Applying putty base with proper completion of work.

Finishing walls with water proofing cement paint of approved made such as super snowcem, Durrocem, Robiacem Guttucem, supermen quality of required shade on uncoated wall surface (two coat) over one coat white cement primer to give even shades after throughly brushing the surface of remove all dirt and remains of loose powdered material including curing and cost of all materials. for every coat after first coat of subsequent coat. with proper completion of work.

Providing and laying "Brick Coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mised with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top square marks 30cmX30cm, and side wall parapet shall be monoltythic plaster wall upto 30cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary &coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all materials, labour and T&P rtc. required for proper completion of the work.

Construction of drain alongwith apron. With size 15 cm.x15 cm including of all cost of labour & T&P with proper completion of work.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :. (a) 250mm x 16mm. with proper completion of work.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm with proper completion of work.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 125 mm

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

Brick work in super structure in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.Hold fast for chaukhats of doors/windows.

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Door / windows & Staircase grill.

Fixing of Door chaukhats in position. with proper completion of work.

Fixing of Window chaukhats in position. with proper completion of work.

Fixing of Ventilator chaukhats in position. with proper completion of work.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood battens.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm with proper completion of work.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coat with proper completion of work.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes with proper completion of work.

Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . with proper completion of work.

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. (a) 250 mm x 10mm

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. (a) 200 mm x 10mm

Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm

Providing and fixing stainless steel handles with screws etc. complete (a) 100 mm

P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws & one side laminated.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws & one side laminated. Extra for one side decorative veneering

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & laying of light cinder filling under floor of toilets & other sunken roofs. with proper completion of work.

Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)

Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 wooden painting

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (Outer surface)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work (Inner walls & Ceiling)

Laying of 25mm thick KOTA stone in dado of size 45 X 45cm and above flooying over perviously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joint with cement mixed with pigment required for matching the shade of floor as per Directed by Enginer-In-Charge including cutting polishing with wax polish including supply of all materials, labour and T&P required for proper completion of work.

Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone ballast 20 to 40mm) and curing complete,including cost of form- work,in floors.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood.

Wax or french polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper, including supply of all material, labour and tools & plants etc. required for proper completion of the work.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing of wardrobe. As per directed Engineer in Charge.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre Anti microbial false ceiling tile confirming to ISO 5 (class 100) specifications

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. with proper completion of work.

Providing and laying of factory made 80 mm thick rubber moulded interlocking cement conrete tile (30 mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding / laying of interlocking tile levelling & dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T & P etc. required for proper completion of work.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, excluding the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing & fixing 27.5 cm long wire spring grade no. 2 for rolling shutters. Asper directed engineer in Charge.

Providing & fixing top cover for rolling shutters. Asper directed engineer in Charge.

Providing and fixing ball bearing for rolling shutters. Asper directed engineer in Charge.

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood with proper completion of work.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Providing and laying in position bitumen hot sealing compound for expansion joints etc. .Using grade 'A' sealing compound. with proper completion of work.

Internal/External water supply and Sewerage work in office building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal Electrification work in office building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Fire Fighting work in office building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Boring work in office building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal/External water supply and Sewerage work in Type-4 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal Electrification work in Type-4 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Boring work in Type-4 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal/External water supply and Sewerage work in Type-3 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal Electrification work in Type-3 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Boring work in Type-3 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal/External water supply and Sewerage work in Type-2 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal Electrification work in Type-2 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Boring work in Type-2 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal/External water supply and Sewerage work in Type-1 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Internal Electrification work in Type-1 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Boring work in Type-1 Residence building, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

External water supply and Sewerage work of colony including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

External Electrification work of colony Campus, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Providing and fixing of water tank (500.00 ltr. Each) of Polyrthelene including all cost of Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Horticulture work in colony Campus, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

Rain water harvesting in colony Campus, including supply, laying, fixing and cost of all Material, Labour and T&P etc. required for proper completion of work. As per directed by Engineer in Charge.

MAA VAISHNO CONSTRUCTION COMPANY