Providing EI and Fans and various electrical works in Vikas Nagar Division in BA Dehradun

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

Supplying and fixing of following size of flexible round copper cable on surface/ recess with suitable clamp , suitable for work on 230 volt, 50 HZ AC supply i/c connection etc as reqd ( Make -Polycab/Havells/Finolex )

2x1.5 sq mm

3x1.5 sq mm

3x2.5 sq mm

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole Neutral

Triple pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

S/F of D/S type fan hook made of MS rod i/c fixing the same on ceiling with suitable 2 no Anchor fastener etc as required

SITC of 1x18/20 Watt LED Batten luminarie with polycarbonate Housing having efficiency 100 lumens /watt complete suitable for work on 230 volt 50Hz AC supply i/c connection testing etc complete as required.(Make -Philips /Crompton/Havells /Bajaj/Wipro/Surya ).

S/F of following size star rated energy efficient Ceiling fan suitable for operation on 230 Volts ,single phase 50 Hz AC supply complete etc as reqd without regulator)Make -( Bajaj/Polar /USHA /Crompton /Havells /orient )

SITC of 450 mm sweep oscillating type wall mounted fan with three speed control regulator having metallic body and metal blade ,1325 RPM speed , 6030 m3/Hour Air Displacement ,suitable for working on 230 V 50 Hz single phase AC supply & i/c fixing on wall with suitable fastener , connection etc. complete as required (Crompton/Bajaj/orient/polar/Almonard/USHA)(Conference Hall )

S/F of following size metallic body exhaust fan with front guard ,1350 rpm ,Air delivery 550 CMH suitable for operation on 230 Volts ,single phase 50 Hz AC supply complete etc as reqd (Make -( Bajaj/Polar /USHA /Crompton /Havells /orient )

Supplying and laying of following size of pvc insulated pvc sheathed 1.1 kv grade Aluminum conductor armored cable confirming to relevant IS-Specification etc complete as reqd. (Make -Polycab/Havells/finolex)-

4 X 16 sq. mm

Supplying and making End Termination with brass compression glands for the following sizes of PVC / XLPE insulated PVC sheathed & armoured 1100 V grade cable including cost of crimping lugs / ferrules, compression glands, solder, cable sockets, insulation tap etc. complete as required.

4 x16 Sq.mm.

S/F of 63 amps four pole ON load change over switch in steel enclosure with side handle operation capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastener i/c drilling hole , making connection, earthing the body etc. i/c dismantling of existing faulty unit (if required at site)as reqd.

S/F 63 Amps Heavy duty Double break TPN Switch fuse unit with HRC fuses in steel enclosure with side handle operation capable of working 415/500 V i/c i/c fixing the same on wall /pole with suitable clamp/fastener i/c drilling hole , making connection, earthing the body etc. as reqd.

Supplying & fixing of Powder coated Surface mounted bus bar chamber Box made out of 18 gauge M.S. Sheet suitable for 100 Amp,415 volt 3 phase AC supply for Distribution of AC power supply i/c removable top & bottom gland plates with conduit knockouts with sufficient space for different cable size complete as required.

Visiting charges of Electrician per site on Call basis for repairing of Elect accessories (except AC & DGs ) in various exchanges/ BTSs i/c analysis of fault, minor repairing , cleaning of free cooling filter/ ACs filters including to & fro journey charges etc comp as reqd.

Hill Area in OA Dehradun

S/F of following electrical items in existing Electrical Installation ,Compound light I/c dismantling of existing faulty items (if required ) and connection, testing etc. as reqd.( Note- All spare of lighting systen should be of Make -Bajaj/Crompton/Philips /Havells /Wipro )

18/20 W Retrofit Pin type LED Bulb

9 W Retrofit Pin type LED Bulb

Batten Holder

5/6A Switch

3 pin 5/6A Socket

15/16 amp switch

6 pin 15/16 amp socket outlet

3 mm thick phenolic laminated sheet

5 A Plug Top

15 A Plug Top

S/F of two module Stepped type electronic fan regulator on the existing modular plate switch box I/c connections but excluding modular plate etc. as required.

Shifting & ITC of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.( OLD FANS)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (At Dasau, Rasoolpur, Jogyo & Tuini)

4 way (4 + 12), Double door

SITC of 25 Watt Energy Efficient LED type Road Light luminarie with pressure die cast aluminum with mid power LED's as light sources & Heat Resistant toughened glass with frame cover and integral electronic driver complete with IP 65 protection ,min. system efficacy 100 lm/Watt suitable for work on 140-270 V AC Supply i/c fixing on existing GI bracket / Pole and connection i/c removing of existing faulty light etc as reqd (Make -Philips /Crompton/Havells Endura omniplus /Bajaj/Wipro ).

SH-II (DG related Items)

Shifting (from Sahiya to Kasi Gate) & ITC of existing 40 KVA AVR (Servokon Make) at TE Kalsi Gate after testing the same at TE Sahiya i/c transportation, loading & unloading etc. Complete as required.

Supplying and fixing of 12 Volts Maintenance free Battery of following capacity for E/A sets, i/c initial charging, battery terminals, transportation, testing, commissioning etc. complete as reqd.(Note: Battery should be of atleast 24 months warranty (18 month full replacement +6 month prorata basis). Manufacturer warranty card with dealer stamp shall be submitted along with new battery & Cost of old battery shall be adjusted/returned)

12 V, 100 AH (At Sabhawala, Dakpathar & Herbertpur)

Pdg & Making of General Servicing of the following capacity E/A sets of different make and model installed at TE/BTS Sites i/c replacement of Lub oil ,lub oil filter and diesel filter and cleaning of all parts of DG set like fuel line ,cooling system ,checking of all DG control wiring ,belt and drives for proper working as per manufacturer recommendations complete as per manufracturer recommendation i/c Fare and labour charge i/c complete as reqd.(Note: The recovered black oil shall be given to contractor.)

15 KVA (At TE Dakpathar)

Installation, testing , commissioning of Existing DEA set on existing foundation with all acessories like Cubical type manual /AMF control panel i/c fixing of Silencer ,exhaust pipe , fuel tank , fuel line connections, control wiring from panel to engine i/c cutting, jointing, welding of flanges (if reqd) , nuts, bolts , i/c loading and assembling ,fixing the the DG Set i/c making good the damage etc. i/c One hour testing of DG set on exchange load etc as reqd.

15 kVA EA set in silent canopy (At TE Dakpathar)

Replacement of following item in upto 40 KVA E/A sets of different make and model installed at TE/BTS Sites, i/c removing of faulty item (if reqd) ,making connection, testing etc complete as reqd.

Battery Charger (Solid state SMPS or SCR based battery chargers suitable up to 12V, 180 AH Battery) (At Sabhawala)

RPM cum Hour Meter with cable etc. (At Rudrapur & Kalsi Gate)

Re-fixing of Solar Panels i/c DC cable connection re-fixing the structure made out of galvanized angle iron i/c cutting welding and grinding at site etc, complete as required. (At Hattar)