Fire Safety System

Name of Work: Taluka Sevasadan at Karjan, Dist. Vadodara (Providing and Fixing of Fire Hydrant

System and Implementation of Fire Sprinkler Systems with Conventional Alarm and Detection

System with Fire pump etc.)

BILL OF QUANTITIES

It. No. Description of Item Quantity Unit Rate in Figure Total

1 (A) Supplying, installation, testing and commissioning of Electric 1.00 Set 328966.95

Driven Main Fire Pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

(B) Horizontal type, single Stage, centrifugal, End suction pump of

cast iron & bronze impeller with stainless steel shaft, Gland Pack

conforming to IS

(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous

speed 2900 RPM, suitable for operation on 415 volts, 3 phase

Hz, AC supply with IP 55 protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to JS-325.

(D) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti

vibration pads.

2280 LPM at 70 m Head

2 (A) Supplying, installation, testing and commissioning of Diesel 1.00 Set 544162.71

Engine Driven Fire Pump suitable for automatic operation and

consisting of following, complete in all respects, as required: (Diesel

(B) Horizontal type, Single stage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS

(C) Suitable HP, 1500/2300 RPM water cooled with radiator, diesel

engine conforming to relevant IS standard

complete with auto starting mechanism, 12 /24 volts electric starting

equipment, 125 Ltrs diesel tank, exhaust pipe extended upto 10 m

outside pump house duly insulated with 50 mm thick glass wool with

1.0 mm thick aluminium sheet cladding, residential silencer,

instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications,

painted with post office red colour etc. as required.

(D) M.S fabricated, common base plate, coupling, coupling guard,

foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and with

anti vibration pads.

2280 LPM at 70 m head

3 (A) Supplying, installation, testing and commissioning of Electric 1.00 Set 92588.14

Driven Pressurisation Pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

(B) Horizontal type/Vertical Inline type, Single Stage/Multi Stage,

centrifugal End suction pump of cast iron body and bronze impeller

with stainless steel shaft, mechanical seal conforming to IS:

(C) Suitable HP squirrel cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP

class of protection for enclosure, horizontal foot mounted type with

Class-'F' insulation, conforming to IS:

(D) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and with

anti vibration pads.

180 LPM at 60 m Head

It. No. Description of Item Quantity Unit Rate in Figure Total

4 Fabrication, Supply, Installation, testing & commissioning of 1.00 Set 254917.80

Electrical Control Panel of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter

connection with suitable size copper conductor cable/solid copper

strip, having switchgears and accessories, mountings and internal

wiring, earth terminals, numbering etc. complete in all respect,

suitable for main fire pump. pressurisation pump & diesel pump set

complete as per CPWD specification with following in coming and

Outgoings, suitable for operation on 415V, 3 phase, 50Hz AC

supply with enclosure protection class IP 42 as required: for all

suitable AMP fire pump and Disel Pump in one cubical construction

400A. 50kA 4 Pole MCCB, lcs=100% Icu rating

Digital Voltmeter 0-500 V with selector switch

Digital Ammeter (0-250A) with selector switch & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip indicating

Set of Copper Bus Bar 300A

(Note: All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating

125 A, 50kA TPN MCCB, lcs=l00% lcu, with fully automatic

Star/Delta starter suitable for 60 HP pump with overload protection,

current sensing type single phase preventor complete with all

accessories and internal wiring required for automatic operation,

selector switch for local/remote,auto / manual /OFF operation.

63 A, 50kA TPN MCCB, lcs=100% lcu, with suitable HP fully

automatic Star/Delta starter with overload protection, current

sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto / manual / OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -

Automatic/Manual selector switch & 3 attempts starting device,

timers and relays as required, push buttons, start/stop in manual

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp

and Engine on indication

Battery charger suitable for 12V/24 V DC with boost and trickle

selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter.

All standard relays and accessories for automatic operation of

System Controller

Designing, Supply, Installation, Testing and commisioning of system

controller to control operation of main electric fire pump, diesel

pump, Pressurization pump, Terrace pump in sequence as per

specification consisting of relays, timers. Sensors, annunciation

window for fault indication, complete as per specification.

5 Supply Installation Testing and commissioning of Zincalvalume 58000.00 Ltr 9.22

sheet Modular tank having size Dia 3.22 x Ht. 6.05mtr with gross

volume of Tank is 50 KL and Effective Volume is 50 KL. Rates are

including of supply and erection of required Fittings & accessories

like Internal & External Ladder, Level indicators, Air Vent, Manhole,

Food Grade Liner & roof Railing as per manufacaturing standard

with required Nozzles for Supply and descharge of Fire water as per

site situation and as directed by EIC.

It. No. Description of Item Quantity Unit Rate in Figure Total

6 Providing, laying, testing & commissioning of 'B' class Medium duty 985.00 Mtr. 602.54

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with painting with two or more coats of

synthetic enamel paint of required shade complete as required:

excluding the cost of Excavation, refilling, demolition of RCC work

and demolition of paver block. 25 mm

7 Providing, laying, testing & commissioning of 'B' class Medium duty 72.00 Mtr. 818.64

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with painting with two or more coats of

synthetic enamel paint of required shade complete as required:

excluding the cost of Excavation, refilling, demolition of RCC work

and demolition of paver block. 40 mm

8 Providing, laying, testing & commissioning of 'B' class Medium duty 36.00 Mtr. 903.39

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with painting with two or more coats of

synthetic enamel paint of required shade complete as required:

excluding the cost of Excavation, refilling, demolition of RCC work

and demolition of paver block. 50 mm

9 Providing, laying, testing & commissioning of 'B' class Medium duty 36.00 1127.12

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with painting with two or more coats of

synthetic enamel paint of required shade complete as required:

excluding the cost of Excavation, refilling, demolition of RCC work

and demolition of paver block. 65 mm

10 Providing, laying, testing & commissioning of 'B' class Medium duty 66.00 Mtr. 1283.05

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with painting with two or more coats of

synthetic enamel paint of required shade complete as required:

excluding the cost of Excavation, refilling, demolition of RCC work

and demolition of paver block. 80 mm

11 Providing, laying, testing & commissioning of 'B' class Medium duty 98.00 Mtr. 1631.36

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required

shade complete as required: excluding the cost of Excavation,

refilling, demolition of RCC work and demolition of paver block.

12 Providing, laying, testing & commissioning of 'B' class Medium duty 26.00 Mtr. 2231.36

G.l. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required

shade complete as required: excluding the cost of Excavation,

refilling, demolition of RCC work and demolition of paver block.

13 Supplying and fixing single headed internal/External hydrant valve 10.00 Each 6955.93

with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

with cast iron wheel ISI marked conforming to IS 5290 (Type -A)

with blank Gunmetal/Stainless Steel cap and chain as required:

Single Headed Stainless Steel

14 Supplying & fixing 63 mm dia. Stainless Steel (Grade 304) short 10.00 Each 2883.05

branch pipe with 20 mm nominal internal diameter size nozzle

conforming , to IS:903 suitable for instantaneous connection to

interconnect hose pipe coupling as required: Stainless Steel (Grade

It. No. Description of Item Quantity Unit Rate in Figure Total

15 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 18.00 Each 3955.08

mm dia male and female couplings duly bound with GI wire, rivets

etc. conforming to IS 636 (type-A) as required: Stainless Steel

16 Supplying and fixing first-aid Hose Reel Drum with MS construction 10.00 Each 8000.00

spray painted in post . office red, conforming to IS 884 complete

with the following as required. 20/25 mm nominal internal dia water

hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

mm nominal internal dia gun metal globe valve & nozzle. Drum and

brackets for fixing the equipments on wall. Connections from riser

with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

17 Supplying, fixing, testing and commissioning of butterfly valve of PN 7.00 Each 4581.36

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS: 13095 of following

sizes as required: 80 mm dia

18 Supplying, fixing, testing and commissioning of butterfly valve of PN 9.00 Each 6161.86

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS: 13095 of following

sizes as required: 100 mm dia

19 Supplying, fixing, testing and commissioning of butterfly valve of PN 6.00 Each 8251.69

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS: 13095 of following

sizes as required: 150 mm dia

20 Providing, installation, testing and commissioning of non-return 1.00 Each 6995.76

valve of following sizes confirming to IS: 5312 complete with rubber

gasket, GI bolts, nuts, washers etc.as required: 80 mm dia.

21 Providing, installation, testing and commissioning of non-return 4.00 Each 10044.92

valve of following sizes confirming to IS: 5312 complete with rubber

gasket, GI bolts, nuts, washers etc.as required: 100 mm dia

22 Supplying installing testing & commissioning of 100 mm dia. 9.00 Each 1783.94

Pressure gauge 1% Accuracy direct bottom 3/8" BSP connection in

brass socket & Range 0 to 16 Kg/Cm2 etc. necessary as directed

by Engineer in Charge.

23 Providing and Fixing pressure switch in M.S. Pipe line including 2.00 Each 1415.25

connection etc. as required.

24 Providing and Installation SS 304 male to male siphone tube size 9.00 Each 1150.03

3/8 inch dia for pressure gauge.

25 Providing and Installation SS 304 male to male siphone tube size 2.00 Each 1150.03

1/4 inch dia for pressure switch.

26 Providing and Fixing 25 mm dia. Air valve of Raising Main Line. For 3.00 Each 970.73

Air Release including supply, installing, testing and commissioning

etc. complete as directed by Engineer in charge.

27 Supply Installing Testing & Commissioning of following dia. Y - 2.00 Each 9900.00

Strainer with gasket, Nut-bolts etc. necessary complete as directed

by Engineer in charge. 150 mm dia

28 Supply Installing Testing & Commissioning of following dia. Y - 1.00 Each 6161.02

Strainer with gasket, Nut-bolts etc. necessary complete as directed

by Engineer in charge. 100 mm dia

29 Supplying and fixing of fire brigade connection of cast iron body with 2.00 Each 6154.24

gun metal male instantaneous inlet couplings complete with cap and

chain as reqd. for suitable dia MS pipe connection conforming to IS

904 as required: 2 way

30 Steel work, welded in built up sections framed work including 115.00 Kg. 91.08

cutting, hoisting, fixing in position and applying a priming coat of red

lead paint. (A) In neams and joints, channels angles Tees, flats,

with connecting plates or angles cleats as in main and cross

beams. Hip and jack rafters, purlins connected to common rafters

31 Supply & installation ISI marked (IS:15683) Fire Extinguisher, 14.00 Each 6058.28

Carbon-di-oxide type capacity 4.5 Kgs. flat base including valve,

discharge hose of not less than 10mm dia., 1M long and complete

in all respects including initial fill with CO2 gas conforming to IS:307-

1966 filled to a filling rate of not more than 0.667 and wall

suspension bracket. (LMR) etc completed as directed EIC.

It. No. Description of Item Quantity Unit Rate in Figure Total

32 Supplying & fixing 6 Kg. Capacity ABC Dry Chemical powder Stored 14.00 Each 3188.57

Pressure type fire Extinguisher As per I.S-15683 having ISI marked

Etc. complete as Directed by EIC

33 Supplying & fixing 9 ltr. Capacity WCO2 Stored Pressure type fire 6.00 Each 4949.00

Extinguisher As per I.S-15683 having ISI marked Etc. complete as

Directed by EIC

34 Design, Supply & Installation of Safety Signage approved make 22800.00 Sq.cm. 2.65

made of zinc sulphide based glow in the dark rigid sheet with high

luminous property enclosed in a transparent weather proof U/V

stabilized plastic pasted on 3mm thick clear acrylic sheet/ foam

sheet such as ASSEMBLY POINT, EXIT, EMERGENCY EXIT, DO

NOT USE LIFT IN CASE OF FIRE, FLOOR MARKINGS, FIRE

LIFT, STAIRCASE EXIT, STAIRCASE STRIP, FIRE ALARM CALL

POINT, FIRE EXTINGUISHER, FLOOR EVACUATION PLAN etc.

completed as directed by engineer in charge.

35 Supplying, installation, testing and commissioning of micro 1.00 Set 212220.34

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and capable

of supporting not less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length upto 2 km, network

communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit

(230 +- 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall

have facility to have seamless integration with analog/digital voice

evacuation system and shall be complete with aa accessories. The

panel shall be compatible for open protocol BACnet/ Modbus over

IP complete as per specifications. Single / Two Loop Panel

36 Supplying, installation, testing & commissioning of intelligent analog 90.00 Each 2545.76

addressable photothermal detector complee with mounting base

complete as required.

37 Supplying, installation, testing & commissioning of addressable 6.00 Each 3443.22

manual call point complete as required

38 Supplying, installation, testing & commissioning of intelligent 6.00 Each 2361.86

addressable programmable sounder complete as required.

39 Supplying, installation, testing & commissioning of response 9.00 Each 259.32

indicator on surface/recessed MS Box having two LED, metallic

cover complete with all connections as required.

40 Supplying & Laying of 2 x 1.5 sq., mm fire alarm armoured cable, 2930.00 Mtr. 162.71

600 / 1000 V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

41 Providing, Fixing & installation PVC 100x100mm junction box for 92.00 Each 212.10

smoke detector including fixing in ceiling with all labour & materials

as directed by engineer in charge.

It. No. Description of Item Quantity Unit Rate in Figure Total

42 Labour charges for Professional & Administrative Charges for 1.00 Job 50500.00

engaging manpower for giving testing in front of Fire Department

and Fire Testing & Liasoning with Fire Department to getting Fire

and Safety Certificate for existing Fire Fighting System include.

engaging skilled labour & skilled supervisor for testing of all fire

system on site with operating pump/panel & existing FA system.

The testing should be done in the presence of PWD authority as

well as Fire Department with required pressure of 3.5 KG pressure

at farthest point. Also testing should be done at every floor with all

installed equipment before final testing. As built fire drawing to be

submitted by bidder to PWD Authority after completion of the work.

Manufacturer Test Certificate attached at the time of RA Bill and

Note - Goverment Official fees and hidden charges shall be extra at

actual to getting fire NOC

43 Providing and fixing SS - 304 Crome Finished Ball valve 25mm dia. 9.00 Each 1069.92

44 Providing, lifting (Terrace Floor) & fixing PVC Three /Four layer 5000.00 Liter 12.88

water tank of required capacity with all necessary fitting and

connection etc. Complete on terrace cabin at any level and at any

height as directed by engineer in charge.

45 Providing laying and jointing in true line and level 25mm dia. 24.00 Mtr. 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

46 Providing laying and jointing in true line and level 50mm dia. 8.00 Mtr. 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

47 Providing and fixing UPVC check or ball valve 25mm dia 1.00 Each 339.56

48 Providing and fixing UPVC check or ball valve. 50mm dia. 6.00 Each 418.24

49 Supply Installing Testing & Commissioning of M. S. 18 guage hose 10.00 Each 4411.74

box to accommodate of 2-Nos 15-Mtrs. Length Hose Box pipe &

No. of branch pipe with Nozzle, With necessary fabrication support

and joints and 3 mm glass shutter including poweder coating etc.

complete as directed by engineer in charge.

50 Excavation for foundation upto 1.5 m depth including sorting out 30.50 Cum 120.01

and stacking of useful materials and disposing off the excavated

stuff upto any lead. (A) Loose or soft Soil

51 Filling in plinth with sand under floors including watering ramming, 3.50 Cum 471.69

consolidating and dressing complete.

52 Supplying and Laying, Spreading and Compacting of hard stone of 3.50 Cum 1024.93

following nominal size including carriage of material spreading in

uniform layers manually on prepared base and compacted

consolidation using 40 to 63mm size BT metal and 25% sand for

binding material, labours etc. completed as directed Engineer in

53 Providing and laying cement concrete 1:2:4 (1- Cement : 2 Coarse 9.20 Cum 3656.13

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

54 Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2- 18.50 Cum 6888.15

coarse sand : 4- graded stone aggregates 20 mmnominal size) and

finishing smooth with curing etc.completeincluding the cost of

formwork but excluding thecost of reinforsement for R.C.C work in

It. No. Description of Item Quantity Unit Rate in Figure Total

55 Providing TMT Bar FE 500D reinforcement for R.C.C. work 1000.00 Kg. 76.21

including bending, binding and placing in position complete upto

floor two level

Rs. Fourty Nine Lakhs, Seventeen Thousand Six Hundred Eleven and Twenty Three Paisa Only

I/We am/are willing to carry out the work @ ______________ % ______________ percent

(should be written in figures and words) below / above, the estimated rates mentioned above, amount of

my/our tender works out as under :

Above all items of "Bill of Quantities" with Item Description, Unit, Qty, Rate & Amount have verified by me and

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 The contractor will have to submit the mix design for different grades of cement concrete and asphalt

at his own cost before execution as directed and to be approved from the engineer in charge.

Deputy Executive Engineer Executive Engineer

District (R&B) Sub Dn. No.1 District (R & B) Division

Vadodara Vadodara