COMPREHENSIVE REPAIRS TO JOINERIES, ROOF, FALSE CEILING , FLOOR, BRICK WORK , PLUMBING AND SANITARY FIXTURE, PAVING , FOOTPATH AND OTHER MISC REPAIRS IN 25 CAMP(1 T0 5) 600 MEN WING AREA CAD, AUL, GURUDWARA LINE AND GE OFFICE UNDER AGE B/R-I AT YOL

Amount

SCHEDULE 'A' PART-I Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

Corrugated galvanized iron mild steel sheets 0.63mm thick, grade ‘O’, with 120 grams per square metre zinc coating fixed with 'J' or 'L' hook as in roof covering with two corrugation side lap. (Horizontal distance of side lap shall not be less than 145mm and depth of corrugation shall be 12.5mm), all as specified.

All as per ser item No.'02' above but except sheets.

0.80 mm thick plain galvainsed mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete, all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), fixed with self tapping screws as specified, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe 410 -W(Gde-E- 250 quality-A ) steel work, complete all as specified.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to grade Fe 410 -W(Gde-E- 250 quality-A ) steel work, complete all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified.

Galvanised iron frame work ( Size of grid 605mmx605mm) comprising of galvanised iron perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with hangers 6 mm dia galvanised (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanised iron flat 40 mm X 3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long with and including ceiling section (not exc 1.2 metre length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including necessary scaffolding all as specified and directed.

4mm thick non asbestos fiber cement building boards( E-Board Classic) as in ceiling fixed or laid/ inserted to timber/GI / aluminium framework fixed with nails, including preparation of surface and applying three coats of white wash complete,all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position,unframed work, complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work, complete all as specified.

2nd class hard wood (sal) as in scantling clean sawn timber fixed to unframed including treating with two coat of creosote oil complete, all as specified.

2nd class hard wood (sal) as in scantling wrought timber fixed to unframed as in verandah Posts complete, all as specified.

2nd class hard wood (sal) as in scantling wrought timber fixed to framed complete, all as specified.

2nd Class hard wood Eaves/Weather boarding, worught on both sides, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps including replacement of existing unserviceable , complete all as specified.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, all as specified.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, all as specified.

Taking down shutters of any description not exc. 1 Sqm each and removing from site, all as specified.

Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, all as specified.

Pressed steel frames of size 105x60mmx1.25mm for door with two rebates including necessary fixing lugs, hinges, lock strike plate etc, including back filling with PCC M-15 (nominal mix) type B-0 using 12.5mm graded crushed stone aggregate complete, all as specified.

Pressed steel frames of size 125x60mmx1.25mm for door with two rebates including necessary fixing lugs, hinges, lock strike plate etc, including back filling with PCC M-15 (nominal mix) type B-0 using 12.5mm graded crushed stone aggregate complete, all as specified.

2nd class hard wood (Sal/ Hollock) plain, solid, straight chowkats and frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints with one or more rebates, all as specified.

Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified.

35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , all as specified.

6mm thick teak wood lipping on 35mm thick flush shutters of block board or veneered particle fixed with nail complete, all as specified.

Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (with cut sash bars) edges of framing plain chamfered or rounded fitted without and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified.

Factory made 30mm thick second class hard wood (Sal) glazed and skelton door shutters open rebated and prepared to receive glass gauge etc (with cut sash bars) edges of framing plain chamfered or rounded fitted without and mitred beads for securing glass or gauge etc., as in windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) of part-I, fitted to chowkats, complete all as specified.

18/19mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work fixed with screws to timber frame work, complete all as specified.

6mm thick teak wood lipping on 18/19mm thick block board or veneered particle board fixed with nail complete, all as specified.

Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, over 10cm width or girth including preparation of surfaces, all as specified.

Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 160 of MES SSR 2010 Part-II

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1) specified and directed.

Butt hinges, medium weight, cold rolled, mild steel 100mm long, all as specified.

Butt hinges, medium weight, cold rolled, mild steel 75mm long, all as specified.

Butt hinges, medium weight, cold rolled, mild steel 50mm long, all as specified.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm , fixed ,all as specified.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm , fixed ,all as specified.

Extruded aluminium alloy handles, fabricated type, anodised, of size 100mm, all as specified.

Extruded aluminium alloy handles, fabricated type, anodised, of size 125mm, all as specified.

Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match , all as specified.

Mild steel pre-painted sheet type door spring, heavy duty 200mm long including roller and roller plate complete, all as specified.Make :- Ritz/Everest

Mild steel pre-painted sheet type door spring, heavy duty 200mm long including roller and roller plate complete in repair, all as specified.Make :- Ritz/Everest

S & F Continuous (piano) Width of flaps (when open) in 40mm hinges, mild steel, bright finish or electrogalvanised complete all as specified.

MS work as in chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles con- forming to Fe.290.Gde-E-165, complete all as specified.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, and treated with tar or coal tar black paint , complete all as specified.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of small articles such as treating ends of posts, backs of chowkats, etc., area exc. 0.1Sqm but n exc 0.5 sq. m each, and treated with tar or coal tar black paint , complete all as specified.

Mild steel work as in bolt hooks (stay) hook and pintle hinges, bands, straps, hold fasts, clamps, wall ties, cleats, fanhooks etc. or similar small articles conforming to grade Fe-290 grade E-165, all as specified.

PCC M-10, nominal mix, C-1 using 20mm graded mechanically crushed stone aggregate as, in lintels up to 1.5 metre clear span cuts, steps seismic and other similar bends, coping, bands plates for serving hold fasts etc. and the like including weathering slighting rounded or chamfered angles and throating complete all as specified. Note:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged and glazed skelton shutter(for glass and wire gauge) ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix 'C'. Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.

Mild steel galvanized wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or wire staples or wooden beads, all as specified.

Mild steel galvanized wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed in repair with tinned tacks or wire staples or wooden beads, all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete, all as specified

Sheet glass 3mm thick ordinary quality and glazing with oil putty wooden beads in squares, not exc. 0.5sqm in each pane, complete all as specified.

Figured glass, pin head type 3mm thick and glazing with oil putty/ wooden beads in squares, not exc. 0.5sqm in each pane, complete all as specified.

Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. , complete all as specified

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified

12mm thick ,Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified.

Sheet glass 4.8mm thick ordinary quality and glazing with aluminium beads in squares, exc. 0.5sqm in each pane, complete all as specified.

Sheet glass 4mm thick ordinary quality and glazing with aluminium beads in squares, n. exc. 0.5sqm in each pane, complete all as specified.

Aluminium (diecast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair,complete all as specified.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified.

Mortice lock, brass, vertical type, size 100 mm, 4 lever, fixed in repair , complete all as specified.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,overall length of cover plate 150mm,fixed in repair complete all as specified.

Dismantling of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete,all as specified.

Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.

All as per Serial Item No 69 above but except bricks, all as specified. Note:- Servicable Bricks/stone retrieved from Serial Item No 68 shall be reused.

Walling random rubble masonry with best quality locally available slate stone, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 (1 cement : 6 coarse sand), all as specified.

All as per Serial Item No 71 above but except stone, all as specified. Note:- Servicable stone retrieved from Serial Item No 68 shall be reused.

Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified.

Taking down cement plaster on brick or stone surfaces and tiles with bedding etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, mixed with WPC , all as specified. Note : Supply only Water proofing compound shall be measured and paid for seperately.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, all as specified.

Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, all as specified.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty complete, all as specified.

Three coats of white wash on newly plastered or un plastered, previously undecorated ceiling surfaces including preparation of surfaces complete, all as specified.

Three coats of white wash on newly plastered or un plastered, previously undecorated wall surfaces including preparation of surfaces complete, all as specified.

Preparation of newly plastered wall surfaces and applying two coats of cement base paint complete, all as specified.

Supply only integral water proofing compound, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, including removal of demolished materials not exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point . complete all as specified.

Demolition of cement concrete (unreinforced) above ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, including removal of demolished materials not exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point . complete all as specified.complete all as specified.

Material and labour for fixing of 10mm dia AQUA TP aluminium grouting nipple upto 75mm to 100mm deep by drilling with 12mm bore hole and fixing in cement mortar at 600mm above skiriting / junction/ traps and gravity @ 10-12 Kg/ Sqm pressure using grouting pump complete all as specified and directed.

Material and labour for providing vent for moisture release for wall more than 150mm thick complete all as specified and directed. Make:-AQUAVENT 25100A or Equivalent as approved by GE

Material and labour for providing vent for moisture release for wall less than 150mm thick complete all as specified and directed. Make:-AQUAVENT 2050P or Equivalent as approved by GE

Plain cement concrete M-15, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in floor, 40mm thick, finished even and smooth without using extra cement complete all as specified. (Note:-Glass dividing strips shall be measured and paid separately as "Supply only").

Supply only glass dividing strips, 3 mm thick 38mm wide, conform to design, all as specified.

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).

Plain cement concrete M-15, nominal mix, type B-2, using 40 mm graded mechanically crushed stone aggregate as in sub base of floor/path , 100mm thick, surface finished even and smooth without using extra cement ,all as specified.

Taking down existing unserviceable roof treatment materials and PCC/ cement mortar padding etc complete from roof carefully by cutting chiselling, cleaning the surface by scrapping, brooming, brushing etc and removing the rubbish from site complete, all as directed by Engr-in Charge.

Plain cement concrete M-15, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in padding over roof/chajja top slab , 50mm thick, finished even and smooth without using extra cement including water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete, all as specified and directed. (Note:- WPC and polymeric membrane shall be measured and paid separately) complete all as specified.

APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3.6 kg/ Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 kg per sqm on the bottom of APP and on top of joints of APP complete all as specified.

PCC M-10, nominal mix, C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified.

PCC M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as, in lintels up to 1.5 metre clear span cuts, steps seismic and other similar bends, coping, bands plates for serving hold fasts etc. and the like including weathering slighting rounded or chamfered angles and throating complete all as specified. Note:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Demoltion of stone slabs and tiles of any description or thickness infloors, aprons etc.all as specified.

Green marble 16mm thick slab kitchen cooking platforms/ shelf and vertical faces and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick screedbed in cement mortar (1:4), all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premises, complete all as specified.

Mat finish (non skid), Premium class I grade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Mat finish (non skid), Premium class I grade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.

Glazed coloured white tiles of size 350x250/450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6(1 cement : 6 coarse sand) complete, all as specified.

Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36Sqm, in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Glazed coloured white tiles of size 300x200x6mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Plain cement concrete M-15, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in floor, 25mm thick, even and fair for receiving floor finishes complete all as specified.

Coloured Chequered cement concrete tiles machine pressed of size 25cmx 25cmx 22mm thick with grey cement, set jointed & pointed in neat cement slurry and pointed with coloured cement to match and laid over and including 15mm thick screed bed in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 50mm thick sand cushion, joints of tiles filled with dry sand and compacted with mechanical vibrator complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.

Reinforced cement concrete, M-20 (nominal mix), type A-1, (with 20mm graded crushed stone aggregate as) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified.

TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.

Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

All as per Serial Item No 116 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 114 shall be used).

Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

All as per Serial Item No 118 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 115 shall be used).

Mild steel galvanized iron water tubing 25mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor including taking down complete, all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified.

Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm including 40mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed with including waste pipe of polythylene of low or high density or PVC of 40mm dia, screwed for iron pipe, fixed in repairs ,complete all as specified.

Chromium plated soap tray, fixed in wall with chromium plated screws, fixed in repair complete all as specified.

Wash basins, Vitreous China (Flat back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, including waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repairs, complete all as specified.

Pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore ,and fixed in repairs complete, all as specified.

Stop valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Stop valve, cast copper alloy, fancy,type, chromium plated with long shank and cup(concealed type) , screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Bib taps, 15mm bore, Chromium Plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs, all as specified.

Jet spray set chromium plated, hygenic with 15mm dia 1 metre long with acrylic tube fixed in repairs complete all as specified.

Chromium plated brass shower rose, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified.

Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or out going pipe, PVC 32mm dia flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets , fixed complete ,fixed in repairs all as specified.

Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets , fixed complete , all as specified.

Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repair all as specified.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve , float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe , fixed complete , and making good to floors to match with existing, in repair, all as specified.

PVC toilet cabinet of size 350x450mm with shelf assembly including mirror mounted shutter etc complete fixed in repairs all as specified.

Plate Rack made of stainless steel 0.60 mm thick, size 600mmx750mm, 250mm deep, fixed in poistion with plugs , washers and steel screwscomplete , all as specified.

Brass Chromium Plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified.

Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe, complete all as specified.

25mm bore powder coated MS Curtain rails, with fixing brackets, stops and roller etc. fixed in repair complete all as specified.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches of bore 110mm , complete, including taking up or down old pipe , all as specified.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches of bore 75mm , complete, including taking up or down old pipe , all as specified.

PVC (SWR) bends any radius, 75mm bore jointed with solvent cement( fitted with oval access door all as specified.

PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door all as specified.

PVC (SWR) bends any radius, 110mm bore( fitted with oval access door, all as specified.

PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door all as specified.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, all as specified.

PVC (SWR) Nahani trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, all as specified.

PVC (SWR) vent cowl, for 110mm bore of pipe, complete all as specified.

Chromium Plated grating doom 100/125mm dia with waste hole, fixed in repair, complete all as specified.

PVC connection 15mm size with PTMT nuts at boths end 450mm long and fixed in repair , all as specified.

Disconnecting existing tanks of capacity exc 250 litres but not exc 500 liters , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Cleaning and removing all scale and dirt, etc, from tanks and from mouth, all as specified.

Disconnecting existing tanks of capacity exc 500 litres but not exc 1000 liters , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Cleaning and removing all scale and dirt, etc, from tanks and from mouth, all as specified.

20mm PTMT Nipple suitable for HDPE water tank. (Minimum weight20mm-45gms) fixed in repair , complete all as specified .

25mm PTMT Nipple suitable for HDPE water tank. (Minimum weight 25mm- 65gms) fixed in repair , complete all as specified .

Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with brass ball float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, all as specified.

Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with brass ball float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, all as specified.

20mm bore Ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified.

Providing M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in 40mm thick precast cement louvres and jallies, (measured solid), including all mouldings set in cement mortar 1:4 complete all as specified

Cutting of uprooting of vagitation of growth/ plants of any size on roof surfaces or chajja including making good the disturbed surfaces and including removing muds /rubbish to a distance not exc . 50m and cleaning the site complete all as spefified.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 20mm bore and fixed in repair, all as specified.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed in repair, all as specified.

Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel or steel based surfaces of any description, n.exc 10cm in width or girth including preparation of surfaces , all as specified.

Applying two coats of synthetic enamel paint on steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, all as specified.

Tank cover made out of 2 mm thick sheet of mild steel, circular in shape having dia 0.45 metres with border of cover made out of mild steel sheet 25 mm wide and 1 mm thick, welded arround the cover at 90 degree with sharp tip nails (10 nos) of 5 cms length, welded on top of cover for protection from monkeys with locking arrangement comprising 04 nos flat iron pieces (25 mm X 2 mm flat iron) of 5 cms length duly drilled and welded with border including 02 nos, 15 cms long GI wire of dia 2 mm for tightening cover with tank and finally painting cover internally & externally with two coats of synthetic enamel paint over a coat of red oxide primer for 500/ 1000 litres tank all as specified.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified.

jatindera enterprises

Ms Sunil Kumar