Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹93.5 LAccepted-AOC | L-1 | Accepted-AOC LOWEST-1 | |
| 2 | L-2₹98.8 L+₹5.2 L (5.57%)Rejected-Finance NOT AVAILABLE | NA | NA | 121004 | L-2 | Rejected-Finance LOWEST-2 | |
| 3 | L-3₹1.0 Cr+₹8.2 L (8.73%)Rejected-Finance HIMACHAL PRADESH HP | L-3 | Rejected-Finance LOWEST-3 | |
| 4 | L-4₹1.0 Cr+₹10.2 L (10.9%)Rejected-Finance | L-4 | Rejected-Finance LOWEST-4 | |
| 5 | L-5₹1.0 Cr+₹10.8 L (11.5%)Rejected-Finance | L-5 | Rejected-Finance LOWEST-5 |
Tender Value
₹1.1 Cr
EMD Value
₹1.4 L
Closing Date
25 May 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER JAL SHAKTI DIVISION BAGGI
as per BOQ
2023_HPIPH_73340_1
EE-JSD-BAGGI/2023- 2945-95 Dated 15/5/2023
Open Tender
Civil Works
Item Rate
180 days
BAGGI
AS PER NIT
6 documents required · 6 mandatory
₹1,500
Yes
EE Baggi
₹1.4 L
Yes
14 Jul 2023
16 May 2023
26 May 2023
17 May 2023
25 May 2023
17 May 2023
Amount
Excavation in foundation,trenches up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including bailing and pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting, planking, timbering & dewatering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus Excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- charge.
Providing & laying cement concrete 1:6:12 (1:cement :6 sand:12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and Plinth.
Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.
Foundation & plinth with in all leads and lifts complete in all respect.
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels.
Providing and laying cement concrete in M 30 grade but not leaner than 1:1:2 (1 cement : 1 sand : 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement and reinforced concrete work in :-
Foundations and Plinth in all leads and lifts.
wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level.
Providing and laying cement concrete 1:1½:3 ( 1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:-
In Foundation and Plinth.
Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.
Suspended floor, roofs, landings shelves and their supports balconies, beams, girders , bressumers and cantilevers etc in all leads and lifts of any shape.
Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing & laying cement concrete 1:5:10(1:cement :5 sand:10 graded stone aggregate 40 mm nominal size) with curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.( in boundary wall)
Boulder filling behind retaining wall under floor with in all leads and lifts complete in all respect.
Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering shuttering struting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in:-
Foundations, footings, basis of columns & the like and mass concrete.
Vertical surface such as wall (any thickness) partition and the like including attached pillasters, butresses, etc. plinth and string course complete job in all respects with in all leads and lifts as per the direction and best satisfaction of Engineer-in-charge.
Flat surfaces such as soffits of suspended floor, roofs, landing and the like complete in all respect complete in all respects as per the directions and best satisfaction of the Engineer-in-charge.
Beams, cantilevers, girders & lintels Sides and soffites of beams beam haunchings, cantilevers, bresummers and lintels not exceeding 1mtr in depth in all heights from floor complete in all respect i/c all leads and lifts.
Laying, jointing and testing of GI pipes (Light Class) of following diameter screwed and socketted pipes, including GI fittings in all leads and lifts as per the directions and satisfaction of Engineer-in-charge, (Earth work in trenches to be measured and paid for seperatly)
50mm dia
65 mm dia
100 mm dia
Providing and fixing Gun Metal wheel valve of Unik make or any other approved make with wheel complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. 50 mm nominal bore
Providing and fixing Cast Steel Slucice Valve with hand wheel complete in all respect and as per the entire satisfaction of Engineer-in-Charge.
100 mm dia
65 mm dia
Providing & fixing precast concrete manhole cover & frame conforming to IS-12593-1988,part-I and IS 12592-1991, part-II, 500mm diameter , medium duty complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Supplying and fixing of cast iron manhole cover with frame 455 x 610 mm rectangular C.I. cover (light duty) single seal pattern the weight of cover 23 Kg. and weight of frame 15 Kg. The total weight of cover and frame to be not less than 38 Kg. complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Random rubble masonary / Polygonal rubble masonary (coursed or brought to courses with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Brick work using common burunt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement : 6 sand) complete job in all respect with in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1 cement : 4 Sand) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
6 mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth in C.M 1:6 ( 1 cement : 6 sand ) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Pointing on brick work with cement mortor 1:3 (1cement : 3 sand) Raised and Cut complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture of required shade on undecorated wall surfaces to give an even shade sand papered smooth complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Distempering with dry distemper of approved brand and manufacture (two coats) and with oil bound washable distemper of approved brand and manufacture of required shade on undecorated wall surfaces to give an even shade sand papered smooth.
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Finishing wall with water proofing cement paint of approved brand and manufacture (two coats ) brushing to give an even shade I/c cleaning of oil,dirt,dust and other foreign matters,sand papering and knotting etc.complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed primer paint brushing wood primer pink complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Painting two coats (excluding priming coat) on new steel and other metal surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 ( 1 cement,3 sand ) over a 12 mm layer of C.M 1:3 ( 1 cement, 3 sand ) and finished neat complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge.
Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar woodcomplete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.G with wire of dia 0.56 mm for doors,windows i/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing anodised MS sliding door bolts with bolts and nuts screws etc. complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing anodised MS tower bolts (barrel type) with screws etc.complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing ad fixing anodised MS handles with necessary screws etc.complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750 mm x 750 mm made with MS Angle 40 x 40 x 4 mm for frame, MS Angle 30 x 30 x 3 mm for cover, MS Flat 25 x 5 mm for fixing of sliding door bolt and MS Sheet 4.00 mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x 16 mm, MS Handle 100 mm, Lock and applying a coat of red lead paint & painting two coat with steel paint (Firoza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and placing in horizontal layers filtering media duly graded, screened, cleaned and washed as specified :
Top layer, Fine sand( Eff. Size 0.20mm to 0.40 and uniformity co-efficient 2.00 to 3.00).
Second layer, Coarse sand, 3mm - 6mm
Third layer : Bajri 6mm to 20 mm.
Fourth layer : Bajri 20mm to 25 mm
Bottom layer : Broken stone 50mm to 75 mm.
Providing and placing Ist class standard bricks in filter bed in two layers so as to make cross drains as per direction of Engineer-in-charge.
Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cementy mortar 1:6 ( 1 cement, 6 sand ) and inside plastering with cement mortar 1:3 ( 1 cement, 3 sand ) i/c earth work and laying 10 cms cement concrete in 1:5;10 ( 1 cement,5 sand,10 graded stone aggregate 40 mm nominal size ) and 7.5 cms cement concrete 1:2:4 ( 1 cement,2 sand,4 graded stone aggregate 20 mm nominal size ) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts complete in all respect.
Industrial floor tiles 12 mm thick using ordinary cement in flooring cement mortar 1:6 (1cement : 6 sand) jointed with neat cement slurry complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
White glazed tiles 6 mm thick in flooring cement mortar 1:3 (1cement : 3 sand) finished with flush pointing in white cement complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 :3 ( 1 cement : 3 sand ) and jointed with cement slurry complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Fixing of fencing panel of size 1.80x1.20 mtrs fitted with expended metal jali 25x25mm mesh welding to MS angle 40x40x5mm with MS flate cover 25s5mm M.S. Hold fast made of MS angle 40x40x5mm fencing panel of size 1.80x1.20 mtrs fitted with expended metal mesh complete in all respect in all leads and lifts
Steel work welded in built up sections, trusses and framed work including cutting,hosting,fixing in position and applying a priming coat of red lead paint in gratting framed guard bars, ladders, railing etc.
Providing and fixing automatic flushing cistern with a pair of CI or MS bracket complete with fitting including CI Syphonic apprature masquits proof lid, CP brass unions and coupling for connecting with inlet outlet and over flow pipes including cutting holes and making good the same Over flow pipe to be measured and paid for seperately (Viterous china 5 liters capacity) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing vitreous china wash down water closet (EuropeanType, W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.
Providing and fixing on wall face PVC (D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads , lifts and carriage of materials.110 mm nominal bore.
Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete.75 mm nominal bore.
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts.) 15 mm nominal bore
Providing and fixing full way wheel valve 15 mm dia Gun metal complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and fixing cast iron spun soil waste and ventilating pipe lead caulked joint to be measured and paid for separately 100mm dia with C.I cowl 100 mm dia nominal size.
Providing and fixing bib tap (superior qualityor heavy type) 15 mm dia complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing & Fixing CP Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts.
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group C.
Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
i) 2 x 1.50 Sq. mm.
ii) 2 x 4.00 Sq. mm.
(a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.
(b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
(a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.
(b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.
(a) 229 mm.x 102 mm.x 60 mm. deep
(b) 203 mm.x152 mm.x 60 mm. deep
Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required.
Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required.
Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)
Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 amp. CAT - A)
Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core cable etc. as required.Ceiling fan 1400 mm sweep category A
Providing and Fixing of Syska make LED Tube Fixture 18 watt complete in all respect in all leads and lifts.
Providing and fixing "LED" ROADWAY LUMINAIRES - "WAVE" (IP 66) Single Piece, Pressure Die-Cast housing with epoxy power coated dark graphite gray colour finish prismetic poly carbonate cover with individual LED Lense with all accessories including cost of lamp ISI mark Bclst 70 watt LED make complete with all accessories and ballast i.e. 15/16 amp. switch & socket with board,copper wire 8 SWG (4 mm dia) Bracket and suitable angle clamps for fixing and other fittings etc.complete in all respect in all leads and lifts.
Providing and fixing two core service wire 6 Sqmm thick in all leads and lifts.
MNBN Enterprises
PANKAJ KUMAR
DALEEP KUMAR
BAL CHAND WALIA
Gulrez Mohammed
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .