SPECIAL REPAIR TO BLDG NO P 2 QTR GUARD AND STROM DRAIN REPAIR IN UNIT AREA OF CERTAIN MIL REGT PROVN OF JAFRI WALL IN FRONT OF OFFICERS MESS OF CERTAIN UNIT AT TELIPARA 1 AND ADDN ALTN TO BLDG NO T 43 AT MES UNDER GE S BINNAGURI

Amount

Demolition of cement concrete(Reinforced) of any description in any position not otherwise specifically provided for and removal of rubbish off the site.

Demolition of cement concrete(un-Reinforced) of any description in any position not otherwise specifically provided for and removal of rubbish off the site.

S&F in repair galvanised 2 strand , steel barbred wire (type ‘A’ and designation class 5) 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with mild steel wire, staples or steel pins, etc. as directed(each line wire to be measured) complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal excess soil to at a distance 50 m and making good surface(soft or loose soil)

M&L as in repair for Cement concrete type D2 1:4:8 (40mm graded aggregate)in foundations filling and mass concrete

M&L RCC 1:1½:3 type A1(nominal mix, using 20 mm graded aggreagte) as in precast fencing post or struts average sectional area exceeding 100 but not exc 250 sq cm with or without chamfered angle including necessary formwork complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately.

M& L for Cement concrete in foundations, filling and mass concrete type c-2 1:3:6 using 40 mm graded aggegrate as in pcc band at ground level to hold the bottom of post etc

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No.8.00 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.

M&L in repair for flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.

Supply and fixing of chain link MS galvanaised fencing 4.0 mm dia and 100 mm x100 mm mesh,made up into mattressess or cage including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Taking down tar felt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC over existing roof surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for waterproofing Coating with polyurethane-based water proofing liquid membrane to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/ company.

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. laid,bedded and pointed in cement mortar in drains complete all as specified and as directed.

M&L Brick work with Locally available best quality bricks , laid on edges on top surfaces of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

M&L Brick work with Locally available best quality bricks , laid flat on verticle inclined sides of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

M&L for Cement concrete in foundations Type D2 1:4:8, filling and mass concrete complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 Type Bo (using 12.5mm graded stone aggregate as in coping etc including necessary form work complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm

Supply and fix for 30mm thick flush shutters, (factory made) solid core construction with particle board core and plywood face panels commercial type on both sides complete all as specified.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as Specified.

Taking down chowkats or frames n exc 1.5 Sqm (without taking off shutter from the frames) and removal from site.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed.

M&L for 150 mm size aluminium anodised cast type handles.

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section.

S&F 100mm size mild steel butt hinges medium weight.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles from site and rubbish off the premises all as specified

M&L for non-skid ceramic (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge

M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

Material and labour rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces top 5mm layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound.

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.

M&L applying two coats of exterior acrylic emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed.

M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shade for New plastered surfaces including priming coat of exterior primer applied

M&L for preparartion of unplastered and newly plaster surface applying three coat of colour washing on wall surface complete all as specified and directed.

M&L for complete removal of existing treatment applying two coat of colour washing on wall surface complete all as specified and directed.

M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling.

M&L for complete removal of existing treatment applying two coat of white washing on ceiling surface complete all as specified and directed.

S&F in repair factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .

S&F in Repair factory made z section steel window with side hung shutter fame including projecting/box type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded including a shop coat red oxide priming complete all as specified and directed

S&F in repair of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth

S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed.

S&F in repair of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.

S&F in repair tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges.

Supply & fixing in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore

Supply & fix in repair angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge.

Supply & fix in reapir Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one.

M&L in repairs for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 110mm) as in repair

S&F in repair of swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F in repair for PVC (SWR) vent cowl fixed to PVC Pipes etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)

S&F in repair for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site as directed.

Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F in repair 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed.

S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets

M& L vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles exceeding 0.42 sqm but n exc 1.0 Sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specifierd and as directed.

All as per item no 69 but as in skirting 10 cm height.

S & F in repair factory made UPVC white colour Sliding window three track (Area n exc 2.0 Sqm each) made of extruded profiles with wall thickness of 2.3 mm (+- 0.2mm) window profiles with jollow section with multi chamber, frame (88 mm x 52 mm ), sliding sash (42 mm x 67 mm) sliding mesh sash (42 mm x 57 mm ) sliding interlock (one vertical length in each shutters) ( 45.50 x 28 mm), glazing bead (24.5 mm x 16 mm ) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanised steel frame (30 x 18 mm ) 2 nos sliding sah (30mm x 18 mm) sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, hardware (Touch Lock of Zinc alloyed ( white power coated) steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.

Factory Made Solid PVC Moulded Door Shutter(With Particle Wood Board Core) , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Factory Made Solid PVC Moulded Door Shutter(With Particle Wood Board Core) , 28 to 30mm thick (stiles), with glazed shutter with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats.

S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and complete all as specified and as directed.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate cchannel with connecting clips across the intermediate channel at 457 mm centre to centre

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

M& L for two coat of Oil boound distember on new wall surface including preperation of the surface all as directed and specified.

M&L for applying 1.0mm thick wall care putty on new or old wall surface all as directed and specified complete.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth.

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing and making good, cutting n.exc 10cm girth as in brick/stone or concrete block walls.

S&F Brass CP mixer for mixing hot & cold water screweddown for iron pipe and fixed complete all as specified and directed.

S&F central hole basin mixer for WHB complete all as specified and directed.

S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.

All as per item no 88.00 but as in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed.

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) as in repair

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe.

S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed by Engr-In-Charge.

Removing excavated material (soil) exc. 50m and not exc 100m depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed by Engr-In-Charge.

M&L for PCC in cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 using 40mm graded aggregate as in foundation complete all as specified and directed.

M&L for old size brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete as directed.

Material and labour for reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in foundation, footings and plinth beams etc complete all as specified. Note: Reinforcement and formwork shall be measured and paid for separately.

Material and labour for reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in columns and the like above footings etc complete all as specified. Note: Reinforcement and formwork shall be measured and paid for separately.

Use and waste of Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Use and waste of Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L preparing newly plastered or unplastered surface of wall and applying three coats of colour wash complete all as specified and directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, including necessary form work as required complete all as specified and directed.

M&L for precast cement concrete type B0 1;2;4 (12.5mm graded aggeregate) louvres and jallies/jafri,25mm thick (measured solid), including all mouldings complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws (or provision of modular sunken box, modular back plate and top cover for housing of modular switch,socket, regulators etc as per site requirement) for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

---ditto all as per item No 110 above One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

---ditto all as per item No 110 above One socket out let 5/6 amps point on the independent board

---ditto all as per item No 110 above One socket out let 5/6 amps point on the same board

---ditto all as per item No 110 above One bell point controlled by one way switch 5/6 amps.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified.

S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.

All as per item No 110 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F as in repair for IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with all as specified.

---ditto all as per item No 134.00 above but LED tubelight 10 W (2 feet)

Supply & fix LED Strip light 25 W modern design with driver (5 RM length per strip), CCT 3K to 6K complete all as specified.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix IP 20, 7 W LED detachable down light, ecofriendly with beam angle greater than 120 degree, lumen output greater than 638 lm, colour temperature 3000K- 6500K, operating temperature range -10 °C to 45 °C having thermoplastic housing complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. (Make- Phillips, Havells, Bajaj or equivalent)

S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified. (Make - Havells, Crompton,Philips)

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with din rail, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and directed. Make : Legrand/ Hager/ABB/C&S.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete with and including taking down old unsv one as specified and as directed.

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 01 Nos electronic meters etc complete all as specified and as directed.

S & F exhaust fan , steel body AC single phase, 230 V of size 300 sweep with blades and frames and louvers complete incl making hole in brick wall all as specified.

Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non- ferrous prewssure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed.

M&L for air termination, single pointed aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangement on roof including taking down old one complete all as specified and as directed.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed copper/aluminium bi-metal strip including 3 Nos 8 mm dia 25 mm long hex head screw including taking down old one complete all as specified and directed.

M&L Aluminium stip 25 x 3.15 mm fixed on and including saddles and fixing screws etc. for roof conductors and down conductors including taking down old unsv strip.

S&F galvanised iron strip of size 32 x 6 mm buried in ground or fixed on wall mounted on suitable sized porcelain insulators ( on floor and wall only) including cutting cavities for fixing of porcelain insulators and finishing with cement plaster on wall /floors and connected to test point including bending, jointing at test points with GI nuts, bolts, with lead washers, jointing strips at all joints incl. making good the disturbed surfaces including taking down old one complete

Refixing Aluminium Strip 25 x 3 mm with saddles & fixing screws etc,for earth continuity conductor main earthing lead , roof conductor & down conductors above ground suitably fixed to wall or concealed in wall , or passing through pipes incl. all necessary fixing arrangement for lightning protection and taking down old unsv strrip complete all as specified and directed.

Fixing in repair the existing dislocated/fallen air termination rods 300mm long,12 mm dia fixed on PCC blocks/on GI pipe/ directly on roof including GI pipe etc, complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and n.exc1.5m depth for foudation,trenches for laying of cables/pipe line etc. and getting out in soft/loose soil.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point.

Returning, filling in, incl. spreading, levelling, watering and well ramming in layers not exc 25cm in type of soil

Supply and laid GI Pipe medium grade complete including fttings 40 mm dia including taking down old one complete

Fabrication and instalation of cubical shape enclosure made of MS/CRCA sheet 2.00mm thick with front detachable cover, anodixed fiexing screw cap, washers 4 Nos to be mounted on wall with wooden plugs & screws 4 Nos duly painted inside and outside by two coats of aluminium paints over a coat of redoxide primer overall dimension of enclosure 150mm x 150 mm x 100 mm (depth) for fixing inside test point terminal block including taking down the old one complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm × 60cm × 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including taking down the old one complete all as specified and directed by Engr-in-Charge.

M/S RELIABLE CONSTRUCTION CO. (BID ID -3117300)

Biswanath Sharma (BID ID -3117087)

M/S RATNESH KUMAR SINGH (BID ID -3123496)

M/S NIKITA ENGINEERING CO (BID ID -3125282)

ANUP ENGINEERING WORKS (BID ID -3122594)

M/s. RAMPHAL GARG (BID ID -3122650)

S.N. GHOSH AND CO. (BID ID -3125336)