REPAIR/MAINT OF WOODEN FURNITURE AND CANING TO WOODEN CHAIR OF VARIOUS TYPES AT GE LANSDOWNE

Amount

Sofa Set 5 Seater/4 seaters /Single seaters (a) Opening the sofa chair with arms and replacement of tapestry cloth with new tapestry cloth not less than Rs. 280- per sqm, replcement of hession cloth with best quality hession cloth, resetting securing providing cheer wood plank and MS round bar 12 mm dia in each chair, refixing springs in seat and back, replacement of unserviceable springs with new springs, and reconditioning including necessary nails screws. FD-18/281

Taking out old unserviceable cushion foam with cover 21" x 22" x 4'' and S & F new cushion foam sheet 100 mm thick Make :- Sleepwell 32 density duly covered with tapestry cloth not less than Rs.280/- per sqm duly stitched with fine standard thread and providing best quality chain with runner on one side. FD-281

Taking out old unservicable broken battens of seat providing new battens made out of 1st class seasoned teak wood all as shown in drg. FD-18/281

Taking out old unservicable broken battens of back and providing new battens made out of 1st class seasoned teak wood all as shown in drg. FD-18/281

Taking out old unservicable front legs and providing new legs made out of 1st class seasoned teak wood all as shown on drg. FD-18/281

Taking out old unservicable rear legs and providing new legs made out of 1st class seasoned teak wood all as shown on drg. FD-18/281

Replacement of broken side rails of sofa chair with new teak wood side rails as per drawings. FD-18/281

Taking out old unserviceable arms and profiding new arms made out of 1st class seasoned teak wood all as shown on drawing. FD-281

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-281

Table dressing ladies with mirror: (a) Taking out existing old faded looking mirror of size 1200 x 380 x 5 mm thick with frame and providing new looking mirror of same size and shape Make :- Atul/Modi guard duly framed with teak wood and replacement of ply wood with new commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror. FD-251, FD-378, DB-1980

Taking out unserviceable drawer plywood, knob and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade and MS CP knob as shown on drawing. FD-251, FD-378, DB-1980

Replacement of unserviceable top and providing new top of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade as per the size and shape as shown on drg. FD-251, FD-378, DB-1980

Replacement of unserviceable bottom and providing new bottom made of prelaminated MDF board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. FD-251, FD-378, DB-1980

Taking out unserviceable back plywood of table base and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade as shown on drawing. FD-251, FD-378, DB-1980

Taking out unserviceable / broken sliding glass of table dressing ladies and S&F New sliding plain glass of 4mm thcik compleat all as specified and shown on drawings. FD-251, FD-378, DB-1980

Taking out unserviceablealuminum channel of table dressing ladies and S&F New sliding plain glass of 4mm thcik compleat all as specified and shown on drawings. FD-251, FD-378, DB-1980

M&L for polishing of table dressing ladies with two or mor coats of french polish after replacement of above components complete all as specified and directed FD-251, FD-378, DB-1980

Table dressing gents: (a) Taking out existing old faded looking mirror of size 380 x 780 x 5 mm thick with frame and providing new looking mirror of same size and shape Make :- Atul/Modi guard duly framed with teak wood and replacement of ply wood with new commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror. FD-290(M)

Taking out unserviceable drawer plywood, and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade and MS CP knob as shown on drawing. FD-290(M)

Replacement of unserviceable top and providing new top of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade as per the size and shape as shown on drg. FD-290(M)

Replacement of unserviceable bottom and providing new bottom made of prelaminated MDF board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. FD-290(M)

M&L for polishing of table dressing gents with two or more coats of french polish after replacement of above components complete all as specified and directed FD-290(M)

Taking out unserviceable knob and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade and MS CP knob as shown on drawing. FD-290(M)

Taking out unserviceable back plywood of table base and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade as shown on drawing. FD-290(M)

Locker bed side (a) Removing of unserviceavle TOP as required of locker bed side wooden ,and S&F made of 760mm x 600mm mm1st Class seasoned teak wood top and Removing of unserviceavle Shatter of 12 mm thick veeneered decorative plywood, (with BWR resin), decorative veneers (teak veneer finish) on one face only fixed with and including two mild steel medium grade ISI marked 50 mm size hinges and 19 mm long mild steel wood screws and two coat french poliesh duly complete all as specified and shown on drg. FD-54/DB-4076

Removing of unserviceavle Shutters as required of locker bed side wooden ,and S&Fof New shatters made of 12 mm thick veeneered decorative plywood, (with BWR resin), decorative veneers (teak veneer finish) on one face only fixed with and including two mild steel medium grade ISI marked 50 mm size hinges and 19 mm long mild steel wood screws and two coat french poliesh duly complete all as specified and shown on drg. FD-54/DB-4076

Providing hasp and staple mild steel 50 mm size 1.6 mm thick, stove enamelled black and fixed with and including screws complete all as specified and shown on drg. FD-54/DB-4076

Providing MS CP 19 mm dia conduit pipe with socket as shown in drg. FD-54/DB-4076

Providing aluminium handles cast type, anodised of 100 mm size complete all as specified and shown on drg. FD-54/DB-4076

Table Dining 6/8 Persons (a) Dismantling existing unserviceable top and providing new top table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-273

All as per item No 6 (a) but table bining 6 persons of size 1500 x 900 x 18/19 mm complete. FD-273 ,FD-30(M)

Replacement of unserviceable legs of size 75 mm x 40 mm x 742 mm 1st Class seasoned teak wood all as specified and shown on drg. FD-273 ,FD-30(M)

Replacement of unserviceable long rail made out of 1st class teak wood 25 mm thick and 100 mm wide complete all as shown on drg. FD-273 ,FD-30(M)

Replacement of unserviceable short rail made out of 1st class seasoned teak wood 25 mm thick and 100 mm wide complete all as shown on drg. FD-273 ,FD-30(M)

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-273 ,FD-30(M)

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-273 ,FD-30(M)

Table 3' x 2' with out drawer (a) Dismantling existing unserviceable top and providing new top table 3'x2' of size 900x600x 18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-284, FD-42

Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom complete all as per drg .FD-284 ,FD-55

Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section all as specified and shown on drg. FD-284 ,FD-55

Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section all as specified and shown on drg. FD-284 ,FD-55

Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood all as specified and shown on drg. FD-284 ,FD-55

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-284 ,FD-55

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-284 ,FD-55

Table 3' x 2' with drawer (a) Dismantling existing unserviceable top and providing new top table 3'x2' of size 900x600x 18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-283 ,FD-41

Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom complete all as per drg . FD-283 ,FD-41

Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section all as specified and shown on drg. FD-283 ,FD-41

Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section all as specified and shown on drg. FD-283 ,FD-41

Removing unservicable drawer and S & F of new drawer made of 1st class seasoned teak wood and 6 mm thick plywood BWR including chromium plated knob. Rest all as specified and shown on drg. FD-283 ,FD-41

Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood all as specified and shown on drg. FD-283 ,FD-41

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-283 ,FD-41

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-283 ,FD-41

Table 3' x 3' (a) Dismantling existing unserviceable top and providing new top of size 900 x 900 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-291

Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood all as specified and shown on drg. FD-291

Removing unserviceable short rail and S & F of new rail made of 1st class seasoned teak wood all as specified and shown on drg. FD-291

Removing unserviceable long rail and S & F of new rail made of 1st class seasoned teak wood all as specified and shown on drg. FD-291

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-291

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-291

Chair dining (a) Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning as per drg. FD-279

Replacement of unserviceable fromt legs made of 1st class seasoned teak wood as per drg. FD-279

Replacement of unserviceable rear legs made of 1st class seasoned teak wood as per drg. FD-279

Replacement of unserviceable stiffeners made of 1st class seasoned teak wood as per drg. FD-279

Replacement of unserviceable back rest made of 1st class seasoned teak wood as per drg. FD-279

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-279

Chair writing (a) Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning as per drg. FD-250, FD 280

Replacement of unserviceable fromt legs made of 1st class seasoned teak wood as per drg. FD-250, FD 280

Replacement of unserviceable rear legs made of 1st class seasoned teak wood as per drg. FD-250, FD 280

Replacement of unserviceable stiffeners made of 1st class seasoned teak wood as per drg. FD-250, FD 280

Replacement of unservicable arm rest made of 1st class seasoned teak wood as per drg. FD-250, FD 280

Replacement of unservicable back rest made of 1st class seasoned teak wood as per drg. FD-250, FD 280

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-250, FD 280

Chair easy (a) Replacement of unserviceable rail/bead for caning made of 1st class seasoned teak wood with suitable holes for caning as per drg. FD-229

Replacement of unservicable front legs with new legs made of 1st class seasoned teak wood as per drg. FD-229

Replacement of unservicable rear legs with new legs made of 1st class seasoned teak wood as per drg. FD-229

Replacement of unservicable seat frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frant and 480mm long in rear as per drg. FD-229

Replacement of unservicable back frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frant and 480mm long in rear as per drg. FD-229

Replacement of unservicable arm rest with new of size 65x25mmx 610mm as per drg. FD-229

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-229

Table writing FD (a) Dismantling existing unserviceable top and providing new top of size 1145 x 600 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-33, FD-249 FD-275

Replacement of unservicable legs with new legs made of 1st class seasoned teak wood as per drg. FD-33, FD-249 FD-275

Repair of drawers (replacement of ply wood 6mm) including chromium plated knobs etc complete all as specification and directed. FD-33, FD-249 FD-275

Replacement of unservicable stiffeners with 1st class seasoned teak wood as per drg. FD-33, FD-249 FD-275

Replacement of unserviceable drawers side with new of size 600 x 500 x 18 mm pre laminated MDF board exterior grade ISI marked all as per drg complete. FD-33, FD-249 FD-275

Replacement of unserviceable lock of drawers with new brass lock 6 lever 50 mm all as per drg complete. FD-33, FD-249 FD-275

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-33, FD-249 FD-275

Side board (a) Dismantling of unserviceable top and providing new top made of prelaminated MDF board exterior grade 18/19 mm thick BWR of same size and shape as shown on drg. FD-241

Dismantling of unserviceable sides and providing new sides made of prelaminated MDF board exterior grade 18/19 mm thick BWR of same size and shape as shown on drg. FD-241

Replacement of unserviceable back ply wood 600 x1200 x 6 mm with new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade. FD-241

Replacement of chromium plated knobs complite all as specified and shown on drg. FD-241

Replacement of unserviceable shutters 375 x 475 x 18/19 mm of the cup board with new shutter made of prelaminated MDF board exterior grade 18/19 mm thick BWR as per drg. FD-241

Replacement of unserviceable bottom frame and legs with new bottom frame and legs made of 1st Class seasoned teakwood as per drg. FD-241

Table centre (a) Dismantling of unserviceable top and providing new top made of prelaminated MDF board exterior grade 18/19 mm thick BWR including 6mm thick teak wood beading all round all as specified and directed. FD-274, FD-235

Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg. FD-274, FD-235

Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg. FD-274, FD-235

Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg. FD-274, FD-235

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-274, FD-235

Teapoy wooden (a) Dismantling of unserviceable top and providing new top made of pre laminated MDF board exterior grade 18/19 mm thick BWR including 6 mm thick teak wood beading all round all as specified and directed. FD-278

Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg. FD-278

Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg. FD-278

Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg. FD-278

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-278

Peg Table (a) Dismantling of old and unserviceable top and providing new top made of pre laminated MDF board exterior grade 18/19 mm thick BWR including 6 mm thick teak wood beading all round all as specified and directed. FD-277/FD-236

Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg. FD-277

Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg. FD-277

Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg. FD-277

Replacement of unservicable stiffeners with 1st class seasoned teak wood as per drg. FD-277

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-277

Book Case (a) Replacement of unserviceable back plywood with new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg. FD-237

Taking out old unserviceable top and S&F new top of prelaminated MDF board exterior grade 18/19 mm thick BWR grade including teak wood beading 6 mm thick shall be provided all round all as specified and shown in drg. FD-237

Taking out unserviceable shutters and S&F new shutters of MDF board exterior grade 18/19 mm thick BWR grade shape and size as shown in drg. FD-237

Stool Dressing CB (a) Replacement of broken legs with new 1st Class seasoned teak wood legs as per drg. FD-252, FD-282

Replacement of broken short rails with new 1st Class seasoned teak wood short rails as per drg. FD-252, FD-282

Replacement of broken long rails with new 1st Class seasoned teak wood Long rails as per drg. FD-252, FD-282

Table bed side (a) Taking out unservicable top of table bed side and providing new top of Prelaminated MDF board exterior grade 18/19 mm thick BWR grade of same size and shape as shown in drg. FD-276

Taking out unservicable sides of table bed left and right side and providing new sides of Prelaminated MDF board exterior grade 18/19 mm thick BWR grade of same size and shape as shown in drg. FD-276

Taking out unservicable shelf of table bed side and providing new shelf of Prelaminated MDF board exterior grade 12 mm thick BWR grade of same size and shape as shown in drg. FD-276

Replacement of unserviceable bottom and providing new bottom made of prelaminated MDF board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. FD-276

Taking out old ply from the back and providing new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg. FD-276

Table 600 x 600 mm (a) Dismantling existing unserviceable top and providing new top of size 600 x 600 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg. FD-293

Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood all as specified and shown on drg. FD-293

Removing unserviceable rail and S & F of new rail made of 1st class seasoned teak wood all as specified and shown on drg. FD-293

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-293

S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. FD-293

Bed newar/Bed Hard Plywood Top: (a) Taking out old unservicable long rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size all as spefied and shown on drawing. FD-245 ,FD-246

Taking out old unservicable short rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size all as spefied and shown on drawing. FD-245 ,FD-246

Replacement of unserviceable ply wood teak face and providing 4mm thick ply wood ISI Marked BWR teak face on one side and other commercial of size 780 x 340 mm on both side of head board. FD-245 ,FD-246

All as per item No 125.00 above but size 780 x 180 mm for foot boards. FD-245 ,FD-246

Dismantling of unserviceable plywood top with new plywood 12 mm commercial BWR confirming to IS 303 as shown on drg. FD-245 ,FD-246 make - kit plywood , cenchure.

Taking out old unserviceable bottom rails of bed ply wood top and Provision of new bottom rails of seasoned teak wood of required shape and size all as specified and shown on drawing. FD-245 ,FD-246

S&F 4 Nos wooden corner cleat to strengthen long rails and legs made of new seasoned teak wood of required shape and size all as specified and directed. FD-245 ,FD-246

Taking out unserviceable head board including legs of Bed plywood top and S&F new head board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete all as specified and shown on drg. FD-245 ,FD-246

Taking out unserviceable foot board including legs of Bed plywood top and S&F new foot board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete all as specified and shown on drg. FD-245 FD-246

Taking out unserviceable stiffener of Bed plywood top and S&F new stiffener made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots complete all as specified and shown on drg. FD-245 ,FD-246

Chairs All Type: Removing existing cane from chairs/couches/ stool dressing CB/Bin soiled linen/chairs CB steel, etc (back & seat) and weaving with and including new cane 2 mm wide half round and 4 mm wide on borders and S & F new PVC/ hard rubber shoes of superior qualit complete all as directed. DB-3922, DB-2799, FD-15, FD-17, FD-20, FD-27, FD-75, FD-228, FD-229, FD-228, FD-229, FD-279, FD-280, FD-282

Avtarsinghchaddhaandcompany

TARUN ENGINEERING WORKS