Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC | ₹39.4 L | L1 | Accepted-AOC L1-OK |
| 2 | L2₹39.5 LRejected-AOC | ₹39.5 L | L2 | Rejected-AOC L2-Reject |
| 3 | L3₹39.5 LRejected-AOC A 703 KOLDONGRI SOCIETY PARSIWADA SAHAR ROAD ANDHERI EAST MUMBAI 400099 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400099 | ₹39.5 L | L3 | Rejected-AOC L3-Reject |
| Sl No | Description | Qty | Unit | Vedanta Interiors L2 | Aryan Interiors L1 | Mahendra And Co L3 |
|---|---|---|---|---|---|---|
| 1.00Sub Estimater No.1 - Demolition & Civil works | ||||||
| 2.00 | Removing doors and windows with frames and stacking thematerials as directed with all leads, lifts etc. complete. | 7 | Number | 150 ₹1,050 | 150 ₹1,050 | 150 ₹1,050 |
| 3.00 | Removing wooden, glass or A.C.partition including frame work and stacking the materials as with all leads, lifts etc. complete. | 60 | Square Meter | 180 ₹10,800 | 200 ₹12,000 | 190 ₹11,400 |
| 4.00 | Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts. | 58 | Square Meter | 150 ₹8,700 | 150 ₹8,700 | 150 ₹8,700 |
| 5.00 | Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete. | 1 | Cubic Meter | 600 ₹600 | 500 ₹500 | 600 ₹600 |
| 6.00 | Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete | 10 | Square Meter | 200 ₹2,000 | 200 ₹2,000 | 200 ₹2,000 |
| 7.00 | Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. | 1 | Job | 5,500 ₹5,500 | 5,000 ₹5,000 | 6,100 ₹6,100 |
| 8.00 | Dismantling and removing the existing fixed and loose furniture etc. including tables, chairs, fixed and loose storage etc complete and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. | 1 | Job | 5,500 ₹5,500 | 5,000 ₹5,000 | 6,100 ₹6,100 |
| 9.00 | Providing and laying 4 mm to 6.5 mm thick SPC / PVC plank flooring of approved make, made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with 'T' or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturer's specifications. The entire work is to be completed as per the direction of the EIC/Architect. | 68 | Square Meter | 3,000 ₹2.0 L | 3,200 ₹2.2 L | 3,000 ₹2.0 L |
| 10.00 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. | 3 | Square Meter | 3,850 ₹11,550 | 3,500 ₹10,500 | 4,000 ₹12,000 |
Tender Value
₹39.5 L
EMD Value
₹39,600
Closing Date
5 Feb 2026, 5:00 pmClosed
Superintending Engineer Mumbai HQ
Office of the Superintending Engineer, Mumbai, MIDC, Udyog Sarathi, Mahakali Caves Road, Andheri East, Mumbai- 93.
M and R to NRB at Udyog Sarathi Building.. Renovation Work of Jt. CEO office by providing meeting room, waiting area and Staff cabin at Old Land Section Second Floor at Udyog Sarathi, Andheri.
2026_MIDC_1270949_1
MIDC_Renovation Work of Jt. CEO office by providing meeting room_E.C.Rs.-39,51,315
Open Tender
Support/Maintenance Service
90 days
Marol Industrial Area
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,030
₹39,600
20 Mar 2026
22 Jan 2026
9 Feb 2026
22 Jan 2026
5 Feb 2026
22 Jan 2026
22 Jan 2026 - 27 Jan 2026
Sub Estimater No.1 - Demolition & Civil works
Removing doors and windows with frames and stacking thematerials as directed with all leads, lifts etc. complete.
Removing wooden, glass or A.C.partition including frame work and stacking the materials as with all leads, lifts etc. complete.
Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts.
Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete.
Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts.
Dismantling and removing the existing fixed and loose furniture etc. including tables, chairs, fixed and loose storage etc complete and stacking of serviceable material and disposal of unserviceable material with all lead and lifts.
Providing and laying 4 mm to 6.5 mm thick SPC / PVC plank flooring of approved make, made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with 'T' or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturer's specifications. The entire work is to be completed as per the direction of the EIC/Architect.
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
Sub Estimate No. 2 - Painting Work
Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturer's specifications & instructions of Engineer - In - Charge.
Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete.
Finishing with Multi surface Zinc paint After surface preparation applying one or more coats of zinc based coat comprising of Zinc powder mixed with suitable medium in proportion1: 2 (One part of medium : 2 parts of zinc powder)@ 2.5 litre/10 sqm or as directed by Engineer-in-Charge and one coat of special primer applied @ 0.75 ltr /10 sqm over zinc coat. Top layer with two or more coats of approved luster paint/multi surface paint @ 1.25 ltr/10 sqm including preparation of surface even and smooth etc complete as per direction of Engineer-in-Charge
Sub Estimate No. 3 - Carpentry works
Providing and fixing in position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect.
Size 50 x 25 x 1.62 mm
Size 50 x 50 x 2 mm
Providing & Fixing in position on existing frame work including all materials,
9mm thk marine ply
12 mm thk marine ply
19mm thk marine ply
Providing and fixing Gypsum board of 12.5mm thick including cutting, fixing and finishing as per engineer incharge , complete.
Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .
Providing & Fixing of System Single glazed modular system consists of Aluminium section of 30x45x2 mm thick, with adaptable profile for 6 mm Groove system to accommodate the carpet & the uneven surfaces. All sections duly anodised up to 20-25 microns with 6063-T6 grade and required accessories i.e. glass to glass aluminium I/H sections, T section & 90 degree L sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 30 mm visible face and 45 mm wide with 10/12mm tougheneded glass & insertion of Thermoplastic gasket to adhere the glass firm & airtight. The sound reduction Value is from 32 to 35 Db.etc., all complete as per drawing and direction of the EIC/Architect.
Fluted panels Types-1 Providing Supplying and fixining WPC (Wood Plastic Composite) fluted panels are Various colour, Shape and Size as per the directions of the EIC/Architect.
Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside & 4mm thk veneer out side as per below mention, hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment.
T.W MOULDING Providing and fixing in position mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of all sizes as per drawing and rerquirement. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. complete as per detail drawing, as specified and as directed by Architect / Engineer
Sub Estimate No. 4 - Doors & Windows Works.
Providing,Supplying and installation of UPVC sliding system with Brilliant White colour having L value of 96.5 higher and Titanium Dioxide content of at least 8 PHR (parts per hundred). Supplier must have own production facilities (extrusion & fabrication) & control the entire cycle from extrusion to manufacturing to installation. The outer frame should have a minimum depth of 70mm for 2 track and 128mm for 3 track. The sash (shutter) depth should be minimum 50mm. The face width of the sash should be minimum 70mm. UPVC profiles should have a minimum wall thickness of 2.3mm in the visible area. The profiles should be seamlessly Zip-welded without needing corner cleaning which eliminates weld-sprue cleaning marks on the edges for improved aesthetics and higher strength. The shutter profiles should have co-extruded TPE gaskets in the glazing area which are welded together preventing gaps being formed. The bead profiles should also have co-extruded TPE gasket. Shutters should have 2 layers of Siliconised Brush Seal with a central plastic fin. Fully toughened or Heat-strengthened coated glass ST 167 DGU 6-12-5 mm Glass . DGU 23 mm ST167 Glass of Saint-Gobain or equivalent which have clarity of 654 PP also properties as Visible Light Transmission (VLT) as 61 %, Light Reflection internal as 24 %, Light reflection External as 22 %,Solar Factor as 0.60. Handle must be SS 304 Crank or espag handle for better stablity & handling. Steel reinforcement should be minimum of 1.5mm thickness for shutters and 1.5mm for outer frames and having AZ70 AluminoZinc coating for higher corrosion resistance and approved as per structural calculations. Interlocks between the shutters should only be of anodised aluminium and hooking type. Interlocks should have woolpiles between shutters for better air/water/sound sealing. Woolpile should be siliconised with a central plastic fin. The rollers must be tested
Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge.
Sub Estimate No. 5 - False Ceiling
Providing & fixing in position Coffered Gypsum Board False Ceiling as per manufacturer's specifications & instructions with 12.5mm thick 'Gypboard' Screw-fixed to the underside of suspended G.I. grid. G.I. grid should be constructed & suspended from the main ceiling as per manufacturer's instructions & specifications.G.I.grid should consist of ceiling sections at maximum centre to centre distance 450mm, Perimeter channel intermediate channels at maximum centre to centre distance 1200mm. The ceiling sections should be fixed to intermediate channels with connecting clips. G.I.grid should be fixed to R.C.C. slab /M.S.FRAME above with the help of 25mm x 0.5mm strap hanger & soffit cleat. The joints between soffit cleat & strap hanger and G.I.grid & strap hanger should be with 6.4 x 12.7 mm nut & bolt. Soffit cleats should be fixed to R.C.C.ceiling with W.E. type 12mm dia, 17/16" long steel Rawl plug maximum center to center distance (both ways) of strap hangers should be 1200mm. The Gypboard should be fixed to G.I.grid with 25mm long Drawall screws.
Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Optra (Microlook) EDGE TILES WITH ARMSTRONG 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance =85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 66% GW & 74% RW%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warranty. (Contractor should submit a performance certificate from Armstrong /Ecophone).
Sub Estimate No. 6 - Loose Furniture
Conference table (Size 7200 X1550 X 750MM) Providing and fixing in position Conference room Table of size 8000 X 2900 mm as per approved design and shape given in the detailed drawing consisting of: Table Top – To be made of 19 +19+12 mm thick BWP marine grade plywood covered with 4 mm thick Red wood Burl veneer on top and 1 mm thick approved laminate at the bottom. Edge of theTable Top is to be finished with matching wooden moulding of size 50 X 54 mm. Entire Table Top is to be finished with lamination Polish. Table Top raised top and verticle 400mm width onex Itliyan marble Edge of marble polished theTable Top is to be finished with top coat siler Polish. As per direction. Modesty panel of the Table is to be made of 19+12 mm Thick BWP marine grade plywood boxing(frame work) above provision for A.V. equipmet covering using 19mm thick plywood shutter in side lamintes using soft closer hinges, with plywood/wooden decorative ring support for table top finish with 4 mm thick -kossipo q/c of approved make. All veneer and wooden surfaces are to be finished with three or more coats of melamine polish. bottom 19mm thick marine Plywood above veneer finish. matching wooden moulding of size 25 x 25 mm finished with three or more coats of melamine polish.and necessary cut out above the table for A.V.and Electricle etc complected.as per drawing and instructions of EIC/ Architect.
Providing & arranging in position Staff Table Finished with Laminate in table size 1500 mm x 700 mm x 750 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with laminate and all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
Square / Circular Corner Table Providing & arranging in position corner table out of 2"x2" T W members with proper joinery & hardware as per approved drawings. The top to be finished with 12mm thk. tinted glass top with bevelled edges. Item to be completed in all respects as per drawings & instructions from EIC/ Architect. Size of table:(450 X 450 X 450 mm)
Work stations - Linner shape - type -1 of size (1500 x 600 X 750)
Sub Estimate No. 7 - Chairs And Sofa Works
Meeting room/conference chair Providing and placing in requireed position Godrej make Kareena Mid Back Chair 9PO2AX or approved equiivalant make chair of size 50.0cm W X 49.5cmH with 75.o cm D including necessary approved typeLeather Finish, with base frame S.S. finish complete as per manufacturer specifications and as per instruction of Engineer in charge.
Staff Chair Providing and placing in requireed position Godrej make Bravo mid Back 9U02RX or approved equiivalant make he seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. x 58.0cmH SEAT SIZE: 47.0 cm. W x 48.0 cm. D
Staff visitor chair Providing and placing in requireed position Godrej make Bravo Visitor Back 9U12RX 1 or equivalnet approved make the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.complete as per manufacturer specifications and as per instruction of Engineer in charge.
Waiting area Single Seater Lounge / Sofa in Fabric 1. Varnished wooden base, skilfully crafted with finest hardwood for strength & durability. 2. Quality upholstery & fine stitching workmanship. 3. High Density Polyurethane Foam Come With Pocket Spring , to ensure a long lasting Shape of the sofa, provide soft and cushiony seating feeling and provide resilience for greater support and best seating comfort even for long seating hours.
Sub Estimate No. 8 - Miscellaneous Works
Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect.
Providing and fixing in position 19mm thk. Marine plywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect.
Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect.
Providing & arranging in position dust bins out of perforated (min Size 350 mm dia x 400 mm Height). Item to completed in all respect as per drg & directions.
Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)
Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (Wall Fabric), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge.
Providing & fixing Artificate like Artifical Plant, Picture Frame etc. as per shown in drawing & manufacturers specification
Supply & Installation of 3M Crystal Glass film Frosted/DUSTED/ effect with approved artwork, cut using digital plotter. Self-adhesive, bubble-free installation to be done on clean glass , by Authorized Installers only.3M Architectural Markets. 3M interior Warranty for a period of 5 years for interior application.
Providing Supplying and Fixing Logo the base Plate 6 mm thick with Necessary support Studs in threted above decorative Cappiing, the both types Letters ( Marathi,English) to be fixed in brass solid Materrials, Entire work in proper Manner Cutting,buffing,polishing, as per the directions of the EIC/Architect.
Providing Supplying & fixing brass Plant pot, as per shown in drawing & manufacturers specification. A) Dia 450mm ht 300mm
Providing & Fixing of 6MM Thk Corean table top with Polishin of Approved make & colour
Sub Estimate No. 9 - ELECTRICAL WORK
Point Wiring (WG-PW)
Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW
Secondary point wiring for additional light/bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification no. WG-PW/CW
Accessories for Indoor Fittings (FG-AS)
Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden / sunmica board.
Indoor LED Fittings (FG-IDF/LED)
Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supplying and erecting LED Strip light Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.
Modular switches and Accessories
Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete.
Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and box with wiring connections complete.
Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete.
Supplying and erecting modular type blanking plate one module, on provided plate & box.
Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete.
Supplying and erecting modular type switch 16A on provided plate and box with wiring connections complete.
Bunch of Wires (WG-MA/BW)
Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW
ELV Cabling (WG-ELVC)
Supplying and installing FR PVC sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC
Supplying, Installation & commissioning of Sony make 65” 4K LED TV having model no. FW-65BZ30J with bracket and proper installation etc. complete, as per direction of engineer-in-charge. (Rates Excluding GST)
Supplying and erecting modular pop up Box 8 module with provided AV/HDMI , RJ 45,6 A electrical sockets and switch on provided table
Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male / female 19pin HDMI connectors complete
Water Coolers & Refrigerators (AP-WC)
Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification No. AP-WCR/WC
Air Conditioners (AP-AC)
Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 2.5TR to 2.7TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. AP-AC/ WAC
Drain piping: Providing and fixing of 25mm Dia Hard PVC drain water piping with fittings, support and insulated with 6mm thick closed cell elastomeric nitrile rubber insulation complete as per specifications
Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (control cabling)
Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.
Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra viole
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete
Outdoor Stand Fabrication for Outdoor Split Units: Supply, fabrication and erection of Angle/channel/Flat iron stand, hanging arrangement for air conditioning machines including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specifications.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.13 MB
Drawing.pdf
Other Document • 0.19 MB
TenderDocument.pdf
Tender Documents • 0.33 MB
ItemSpecification.pdf
Additional Documents • 0.05 MB
BOQ_2188450.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid