Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹3 L
Closing Date
17 Nov 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Karnataka Power Corporation Limited
EE PURCHASE
Procurement of Idlers and rollers to RTPS on ARC Basis for a period of one year & extendable for one more year
KPCL/2026-27/IND2843/CALL-2
KPCL/2026-27/IND2843/CALL-2
Open
Two Tender Document System(Two Cover)
KPCL Executive Engineer Purchase Office RTPS Raichur
7 documents required · 4 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
a) For Manufacturers: The intending bidder shall have successfully supplied Belt Conveyor Idlers to any government sector/ PSU/ Major power plants/ Reputed private sector major industries amounting to not less than Rs. 240 Lakhs (Rs. 120 Lakhs for Micro and small Enterprises) in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26 (Preceding 2 years for Micro and small Enterprises i.e. 2024-25 & 2025-26). As a proof purchase order PO copies Single/Multiple (max.3) for any one of the said financial year during which supplies are made shall be uploaded. b) For Authorized Suppliers: The intending bidder shall have successfully supplied Belt Conveyor Idlers to any government sector/ PSU/ Major power plants/ Reputed private sector major industries amounting to not less than Rs. 90.00 Lakhs in any one year of the preceding three financial years i.e. 2023-24, 2024-25, 2025-26.
The intending bidder shall be Manufacturer/ Authorized dealer/ Supplier of Belt Conveyor Idlers. As a proof bidder shall upload valid registration certificate/ dealership certificate/ relevant documents issued by the Competent Authority in e-portal.
The bidder shall have minimum average annual financial turnover of Rs. 600 lakhs (Rs. 300 lakhs for Micro and small Enterprises) during the 3 financial years i.e. 2022-23, 2023-24 & 2024-25 (2 financial years respect to Micro and small Enterprises i.e., 2023-24 & 2024-25). As a proof the bidder shall upload the certified copy of the Annual turnover certificate/Copies of Profit & Loss statement duly certified by the Chartered Accountant.
₹500
₹3 L
3 Nov 2026
3 Nov 2026
18 Nov 2026
11 Nov 2026
ANNEXURE Procurement of Idlers & Rollers to RTPS on ARC basis for a period of one year and extendable for one more year
SL NO IIMS CODE ITEM NAME ITEM SPECIFICATIONS UNIT % of GST included in quoted rates HSN Code MAKE/ BRAND Bidder's Compliance/ Remarks
1 620000788R CARRYING IDLEDR FOR 1600MM B/W CARRYING IDLEDR FOR 1600MM B/W CARRYING IDLERS FOR 1600MM B/W (3 Piece type), Idler Dia 152.4MM, Shell thickness 5.4MM, Idler Length 600mm, Shaft Dia 25MM, Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specifications: Shell/Tube: ERW pipes as per IS-9295/1983, Gr.: Yst 210. Spindle/Shaft: En-8 confirming to BS-970 or 40C8 as per IS-1570. Bearing Housing: CRCA, Grade DDQ as per IS-513. Bearing: Seize resistant ball bearings of SKF/FAG make. Inner seal, Rain cap & Labyrinths: Multi-lip labyrinth made of nylon-6. Dust cover: CRCA, Grade DDQ as per IS-513. Circlip: Spring steel as per IS-3075. Lubrication: Hi-Lithium base grease packed & sealed for life. Painting: The idlers will be painted with one coat of red oxide primer And one coat of synthetic enamel paint 60-65 microns Identification: Manufacturer logo, month & year of manufacture will be punched on the face of bearing housing. Following tests shall be carried out for idlers assembly/rollers at your works:- 1. Dimensional check. 2. Free rotation test. 3. Radial run out test in fixture. 4. Dust ingress test. 5. Water ingress test. 6. Rolling friction test. Further technical details may be obtained by visiting site. NOS 8 4
2 622120527R RETURN IDLER FOR 1200 BELT 2PC RETURN IDLER FOR 1200 BELT 2PC RETURN IDLER for 1200 mm belt ( 2 piece type) for conveyor 55A/B and 54A/B roller dia;-127mm ( material-MS ERW pipe) , length-700mm, thickness-4.5mm , shaft dia-30mm (material EN-8 rod),suitable bearing should be SKF/FAG make only and sealed with high lithium base grease . as per drawing enclosed. NOS
3 622120528R CARRYING IDLER FOR 1200 BELT 3 CARRYING IDLER FOR 1200 BELT 3 CARRYING IDLER FOR 1200MM BELT WIDTH (3 piece type) of conveyor 54A&B. Roller dia ;-152mm, Roller length-465mm, cell thickness;-5.4mm, shaft dia;-30mm. Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specification: SHELL/TUBE : ERW Pipes as per IS-9295/1983, Gr.:Yst 210, SPINDLE/SHAFT : En-8 conforming to BS-970 or 40C8 as per IS-1570, BEARING HOUSING : CRCA ,Grade DDQ as per IS- 513. BEARING : Seize Resistant Ball Bearings of SKF/FAG make. INNER SEAL, RAINCAP & LABYRINTHS : Multi-lip labyrinth made of Nylon -6, DUST COVER : CRCA, Grade DDQ as per IS-513, CIRCLIP : Spring steel as per IS : 3075 LUBRICATION : Hi-Lithium base grease packed & seal for life. PAINTING : The idlers will be painted with one coat of red oxide primer and one coat of Synthetic enamel paint 60-65 Microns. IDENTIFICATION : Manufacturer logo, month & year of manufacture will be punched on the face of bearing housings. Following tests shall be carried out for idlers assembly/rollers at your works. (a) Dimensional check (b) Free rotation test (c) Radial run out test in fixture (d) Dust ingress test (e) Water ingress test (f ) Rolling friction test NOS
4 620010503R RETURN IDLER 1600B/W 2PC RETURN IDLER 1600B/W 2PC RETURN IDLER FOR 1600 MM BELT WIDTH (2 piece type) Idler Dia - 139.7MM , Idler Length - 900 MM , Shell Thickness 5.4MM, Shaft Dia : 25MM, Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specifications: Shell/Tube: ERW pipes as per IS-9295/1983, Gr.: Yst 210. Spindle/Shaft: En-8 confirming to BS-970 or 40C8 as per IS-1570. Bearing Housing: CRCA, Grade DDQ as per IS-513. Bearing: Seize resistant ball bearings of SKF/FAG make. Inner seal, Rain cap & Labyrinths: Multi-lip labyrinth made of nylon-6. Dust cover: CRCA, Grade DDQ as per IS-513. Circlip: Spring steel as per IS-3075. Lubrication: Hi-Lithium base grease packed & sealed for life. Painting: The idlers will be painted with one coat of red oxide primer And one coat of synthetic enamel paint 60-65 microns Identification: Manufacturer logo, month & year of manufacture will be punched on the face of bearing housing. Following tests shall be carried out for idlers assembly/rollers at your works:- 1. Dimensional check. 2. Free rotation test. 3. Radial run out test in fixture. 4. Dust ingress test. 5. Water ingress test. 6. Rolling friction test. Further technical details may be obtained by visiting site.
5 620120502R IMPACT IDLER FOR 1600 MM B / W IMPACT IDLER FOR 1600 MM B / W IMPACT IDLER FOR 1600 MM BELT WIDTH (3 piece type), Pipe Dia: - 114.3 MM , Rubber Dia : - 190 MM, Idler Length: - 600 MM , Rubber Thickness: - 20 MM, Shell Thickness 5.0MM, Shaft t Dia : 30MM, Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specification: SHELL/TUBE : ERW Pipes as per IS-9295/1983, Gr.:Yst 210, SPINDLE/SHAFT : En-8 conforming to BS-970 or 40C8 as per IS-1570, BEARING HOUSING : CRCA ,Grade DDQ as per IS- 513, BEARING : Seize Resistant Ball Bearings of SKF/FAG make. INNER SEAL, RAINCAP & LABYRINTHS : Multi-lip labyrinth made of Nylon -6 DUST COVER : CRCA, Grade DDQ as per IS-513 RUBBER DISCS / LAGGING : The Impact Idlers will be provided with rubber rings of Natural Rubber material conforming to Shore hardness 60? ± 5? CIRCLIP : Spring steel as per IS : 3075 LUBRICATION : Hi-Lithium base grease packed & seal for life. PAINTING : The idlers will be painted with one coat of red oxide primer and one coat of Synthetic enamel paint 60-65 Microns. IDENTIFICATION : Manufacturer logo, month & year of manufacture will be punched on the face of bearing housings. Following tests shall be carried out for idlers assembly/rollers at your works. (a) Dimensional check (b) Free rotation test (c) Radial run out test in fixture (d) Dust ingress test (e) Water ingress test (f ) Rolling friction test Further technical details may be obtained by visiting site.
6 6201205199 CONVEYOR RETURN GUIDE ROLLER CONVEYOR RETURN GUIDE ROLLER THE GUIDE ROLLER ASSEMBLY includes:guide roller with bracket and necessary fixing arrangement Note:The guide roller with bracket assy is to be 100% interchangeble with existing guide roller with bracket assy. Hence the bidder may obtain technical clarification by visiting RTPS site Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our sample. Specification: SHELL/TUBE : ERW Pipes as per IS-9295/1983, Gr.:Yst 210 SPINDLE/SHAFT : En-8 conforming to BS-970 or 40C8 as per IS-1570 BEARING HOUSING : CRCA ,Grade DDQ as per IS- 513 BEARING : Seize Resistant Ball Bearings of SKF/FAG make. INNER SEAL, RAINCAP & LABYRINTHS : Multi-lip labyrinth made of Nylon -6 DUST COVER : CRCA, Grade DDQ as per IS-513 CIRCLIP : Spring steel as per IS : 3075 LUBRICATION : Hi-Lithium base grease packed & seal for life. PAINTING : The idlers will be painted with one coat of red oxide primer and one coat of Synthetic enamel paint 60-65 Microns. IDENTIFICATION : Manufacturer logo, month & year of manufacture will be punched on the face of bearing housings
7 620120609R CARRYING IDLER BRACKET 35DEG For 1200mm Belt CARRYING IDLER BRACKET 35DEG For 1200mm Belt Carrying idler bracket for 1200 mm belt width. Asper the drawing enclosed Further technical details may be obtained by visiting site.
8 622001050R CARRYING IDLER FOR CONVEYOR-36 For 1200mm Belt CARRYING IDLER FOR CONVEYOR-36 For 1200mm Belt L & T make Carriying Idlers for 1200mm Belt Width Conveyor-36 System As per the drawing enclosed Further technical details may be obtained by visiting site.
9 622030804R SINGLE PIECE RTN IDLER 1800MM SINGLE PIECE RTN IDLER 1800MM Single piece return idler for belt width 1600 mm Roller length-1800 mm, dia - 139.7 mm , shell thickness - 5.4mm Shaft Dia : 30MM As per drawing enclosed. Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specifications: Shell/Tube: ERW pipes as per IS-9295/1983, Gr.: Yst 210. Spindle/Shaft: En-8 confirming to BS-970 or 40C8 as per IS-1570. Bearing Housing: CRCA, Grade DDQ as per IS-513. Bearing: Seize resistant ball bearings of SKF/FAG make. Inner seal, Rain cap & Labyrinths: Multi-lip labyrinth made of nylon-6. Dust cover: CRCA, Grade DDQ as per IS-513. Circlip: Spring steel as per IS-3075. Lubrication: Hi-Lithium base grease packed & sealed for life. Painting: The idlers will be painted with one coat of red oxide primer And one coat of synthetic enamel paint 60-65 microns. Identification: Manufacturer logo, month & year of manufacturewill be punched on the face of bearing housing. Following tests shall be carried out for idlers assembly/rollers at your works:- 1. Dimensional check. 2. Free rotation test. 3. Radial run out test in fixture. 4. Dust ingress test. 5. Water ingress test. 6. Rolling friction test. Further technical details may be obtained by visiting site.
10 622120508R IMPACT IDLER, 3 ROLL - 35 DEG For 1200mm Belt IMPACT IDLER, 3 ROLL - 35 DEG For 1200mm Belt IMPACT IDLER FOR 1200MM B/W for conveyor 55A/B and 54A/B Roller dia with rubber ring;-184mm, length of the roller ;- 465mm, thickness of the roller ;-5.4mm, Shaft dia;-30mm , suitabe bearing should be SKF/FAG make only and sealed with high lithium base grease. roller material-MS ERW pipe, shaft material-EN 8 rod. rubber ring details ;- OD-184mm ,ID-114.3mm,thickness-55mm.
11 622120509R RETURN IDLER, 2 ROLL -10 DEG For 1200mm Belt RETURN IDLER, 2 ROLL -10 DEG For 1200mm Belt RETURN IDLER 2 piece type FOR 1200MM B/W for conveyor 55A/B and 54A/B roller dia;-127mm ( material-MS ERW pipe) , length-700mm, thickness-4.5mm , shaft dia-30mm (material EN-8 rod),suitable bearing should be SKF/FAG make only and sealed with high lithium base grease .
12 622120517R ALUMINIUM CARRYING IDLER-3PC For 1200mm Belt ALUMINIUM CARRYING IDLER-3PC For 1200mm Belt ALUMINIUM CARRYING IDLERS-3PC (1PC=1NO) FOR 1200MM BELT WIDTH, material of rolleR-ALUMINIUM, Bearing should be used only SKF/FAG and sealed with high lithium base grease, Required for con27a/b below the SM2A/2B Area
13 622120525R IMPACT IDLER FOR 1200 BELT IMPACT IDLER FOR 1200 BELT IMPACT IDLER FOR 1200MM B/W for conveyor 55A/B and 54A/B Roller dia with rubber ring;-184mm, length of the roller ;- 465mm, thickness of the roller ;-5.4mm, Shaft dia;-30mm. rubber ring details ;- OD-184mm ,ID-114.3mm,thickness-55mm. as per drawing enclosed . Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specification: SHELL/TUBE : ERW Pipes as per IS-9295/1983, Gr.:Yst 210 SPINDLE/SHAFT : En-8 conforming to BS-970 or 40C8 as per IS-1570, BEARING HOUSING : CRCA ,Grade DDQ as per IS- 513, BEARING : Seize Resistant Ball Bearings of SKF/FAG make. INNER SEAL, RAINCAP & LABYRINTHS : Multi-lip labyrinth made of Nylon -6, DUST COVER : CRCA, Grade DDQ as per IS-513,RUBBER DISCS / LAGGING : The Impact Idlers will be provided with rubber rings of Natural Rubber material conforming to Shore hardness 60? ± 5? CIRCLIP : Spring steel as per IS : 3075, LUBRICATION : Hi-Lithium base grease packed & seal for life. PAINTING : The idlers will be painted with one coat of red oxide primer and one coat of Synthetic enamel paint 60-65 Microns. IDENTIFICATION : Manufacturer logo, month & year of manufacture will be punched on the face of bearing housings. Following tests shall be carried out for idlers assembly/rollers at your works. (a) Dimensional check (b) Free rotation test (c) Radial run out test in fixture (d) Dust ingress test (e) Water ingress test (f ) Rolling friction test Further technical details may be obtained by visiting site.
14 622120526R RTN IDLER1200 BELT SINGL PC RTN IDLER1200 BELT SINGL PC return idler for 1200 mm belt ( single piece type) for conveyor 55A/B and 54A/B roller dia;-152.4mm ( material-MS ERW pipe) , length-1400mm, thickness-4.5mm , shaft dia-30mm (material EN-8 rod),suitable bearing should be SKF/FAG make only and sealed with high lithium base grease .
15 620010513R NON MAGNETIC CARRYING ROLLER NON MAGNETIC CARRYING ROLLER NON MAGNETIC CARRYING IDLERS FOR 1600MM B/W (3 Piece type) Idler Dia 152.4MM, Shell thickness 5.4MM, Idler Length 600mm,Shaft Dia 25MM
16 621060107B SELF ALIGNING RETURN IDLER SELF ALIGNING RETURN IDLER Self aligning return idler, Size: 139.7mm ODX5.4mm TK-ERW, shaft dia 30mm @bearing and length 650 mm Bearing Make: SKF/FAG/TIMKEN. Dust seal of Neoprene material Hardness:55-60 shore A, as per drawing no:A3-402-ME-07, Note: Thickness of Idler should be Minimum 5.4mm
17 622030803R RETURN IDLER FOR 2400MM RETURN IDLER FOR 2400MM RETURN IDLER FOR 2400 MM BELT WIDTH (single piece type), Idler Dia - 139.7MM, Idler Length - 2600 MM , Shell Thickness 5.4 MM Shaft Dia : 40 MM, Standards: The idlers shall be life lubricated as per IS:8598/1987 and manufactured duly maintaining the overall dimensions as per our drawing. Specifications: Shell/Tube: ERW pipes as per IS-9295/1983, Gr.: Yst 210. Spindle/Shaft: En-8 confirming to BS-970 or 40C8 as per IS-1570. Bearing Housing: CRCA, Grade DDQ as per IS-513. Bearing: Seize resistant ball bearings of SKF/FAG make. Inner seal, Rain cap & Labyrinths: Multi-lip labyrinth made of nylon-6. Dust cover: CRCA, Grade DDQ as per IS-513. Circlip: Spring steel as per IS-3075. Lubrication: Hi-Lithium base grease packed & sealed for life. Painting: The idlers will be painted with one coat of red oxide primer And one coat of synthetic enamel paint 60-65 microns Identification: Manufacturer logo, month & year of manufacture will be punched on the face of bearing housing. Following tests shall be carried out for idlers assembly/rollers at your works:- 1. Dimensional check. 2. Free rotation test. 3. Radial run out test in fixture. 4. Dust ingress test. 5. Water ingress test. 6. Rolling friction test. Further technical details may be obtained by visiting site.
18 620010634R RTN IDLER BKT 1200BW2PC RTN IDLER BKT 1200BW2PC Return idler bracket for 1200mm B/W Type:2Roll,10deg.The overall dimension will be as per sample.Note:The bracket is to be 100% interchangeble with exisxting bracket, Hence the bidder may obtain technical specification by visiting RTPS site. Painting:The Brackets will be painted with one coat of redoxide primer and one coat of synthetic enamel paint 60-65Microns. Identification:Manufacturer logo,month & year of manufacturing will be punched on the face.
19 620010622R FRAMES SA RTNS 1200 BW FRAMES SA RTNS 1200 BW Self aligning return idler bracket Type:2 Roll-10' For 1200 B/W, one set consist of: Base Frame & Swivelling Frame will be made from 100 X 50 X 6mm channel. All support stiffeners will be made from 60mm X 8mm Flat. All inner brackets & outer brackets will be made from 70mm X 8mm Flat. Swivelling arrangement will be fitted with heavy duty type thrust bearing / taper roller bearing. The shaft dia of the swivelling system will not be less than 50mm. Guide Rollers will be made from graded cast iron. Cast iron shell thickness will not less than 12mm after final assembly. Each guide rollers will be fitted with double ball bearing. Identification:Firm name, logo, month and year of manufacturing will be punched on the frame Note:All the necessory fixing arramgement should be made, The frame should be ready to use directly in the conveyor system, Ref drg
20 620010528R TRU-TRACKK FLAT RETURN ROLLER TRU-TRACKK FLAT RETURN ROLLER 'TRU-TRACK' Flat Return Tracker Roller Type TTFR complete with fixing bracket suitable for fixing on the return belt conveyor of 1200mm belt width
21 620010529R TRU-TRACK CARRYING ROLLER TRU-TRACK CARRYING ROLLER TRU-TRACK Through Tracker Roller Type complete with swing roller and fixing bracket for fixing on the carrying belt conveyor of 1200mm belt width
22 620120520R RETURN IDLER - SINGLE PIECE RETURN IDLER - SINGLE PIECE Single Piece Return Idler for 1200mm belt width Roller Tube length 1400mm, Tube Dia 127 x 4.5 mm thick, Shaft Dia 30mm,length, 1450mm, bearing 420206 SKF/FAG, notch 22x10mm. All dimensions/specifications should be as per Drawing Enclosed
23 620001016R TWO PIECE RETURN ROLLER TWO PIECE RETURN ROLLER Two Piece Return Idler for 1200mm Belt Width 127 dia X 700 MM Long. All dimensions/specifications should be as per Drawing Enclosed. Further technical details may be obtained by visiting site. Detailed drawing must be submitted and get approved before supply of material.
24 620010509R RETURN IDLER WITH BRAKET RETURN IDLER WITH BRAKET CONVEYOR WIDTH 1200MM:ROLLER TUBE LENGTH 1400MM,TUBE DIA 127 X 4.5 MM THICK WITH BRACKET. As per the drawing enclosed. Further technical details may be obtained by visiting site. Detailed drawing must be submitted and get approved before supply of material.
25 620010510R RETURN ROLLER B/W 1200 MM 2PCS RETURN ROLLER B/W 1200 MM 2PCS Two Piece Return Idler for 1200mm Belt Width 140 Dia x 650 Long for All dimensions/specifications should be as per Drawing Enclosed. Further technical details may be obtained by visiting site. Detailed drawing must be submitted and get approved before supply of material.
26 620010523R RETURN IDLER FOR CON-57 RETURN IDLER FOR CON-57 Self Align Return idler ( Pipe dia 139.7mmx5.4mm thk x 760mm lg and shaft dia x 25mm x 830mm lg) for conveyor-57 As per drawing Further technical details may be obtained by visiting site. Detailed drawing must be submitted and get approved before supply of material.
27 620010531R IMPACT IDLER 1800MM B/W IMPACT IDLER 1800MM B/W FOR 1800MM BELT WIDTH-3PIECE,as per drawing
28 620010532R FLAT RETURN IDLER FLAT RETURN IDLER REQUIRED FOR 1800MM CONVEYOR BELT(SINGLE PIECE).
29 6200105352R RUBBER END DISC ROLLER RUBBER END DISC ROLLER FOR 1400/1800MM BELT WIDTH 3PIECE IMPACT ROLLER ,as per drawing
30 621120507R CARRYING IDLERS CARRYING IDLERS Carrying Idler for 1200mm Belt Width Dimensions (mm): 465 Length x 152.4 Dia. x 5.4 shell thickness). All dimensions/specifications should be as per Drawing Enclosed.
31 6200105361R RUBBER INT DISC ROLLER RUBBER INT DISC ROLLER FOR 1400/1800MM BELT WIDTH 3PIECE IMPACT, ROLLER ,as per drawing
32 620010536R IMPACT IDLER FOR 1400MM BELT IMPACT IDLER FOR 1400MM BELT Impact Idler for 1400mm Belt Width Dimensions: 530 Length x 190 Rubber Dia x 114.3 Tube Dia x 5.4 Shell thickness). All dimensions/specifications should be as per Drawing Enclosed.
33 620010538R NON MAGNETIC IDLER FOR 1200B/W NON MAGNETIC IDLER FOR 1200B/W Non Magnetic Idler for 1200mm Belt Width All dimensions/specifications should be as per Drawing Enclosed.
34 620010542R IMPACT IDLER BRAKET WITH ROLLR IMPACT IDLER BRAKET WITH ROLLR Impact Idler - T.A. -35 degree for 1800MM BW consisting of 3 nos. of Rollers with 1 no. of frame as per G.A. Drg.No.D29319/4 Sr.No.4
35 620010580R RETURN IDLER (1400MM BELT) RETURN IDLER (1400MM BELT) TWO PIECE RETURN IDLER FOR 1400MM WIDTH BELT. ( 800LENGTH X DIA 127 X SHELL THICKNESS 4.5MM.)
36 620010581R FLAT RETURN IDLER(1400MM BELT) FLAT RETURN IDLER(1400MM BELT) Single Piece Flat Return Idler with Bracket for 1400mm Belt Width (1No. consists of 1 Idler and 2 Nos. Brackets) All dimensions/specifications should be as per Drawing Enclosed.
37 620010582R IMPACT IDLER OD190 LENGTH 465 IMPACT IDLER OD190 LENGTH 465 Impact Idler for 1200mm Belt Width All dimensions/specifications should be as per Drawing Enclosed.
38 620010583R FLAT RETRUN IDLER WITH BRACKET FLAT RETRUN IDLER WITH BRACKET Flat Return Idler for 1400 BW as per Drg.D29296 /4 Sr.No.1 consisting of Roller 127mm dia X 4.5 thick X 1600LG (420206 NBC )-1No. & Brackets-2nos.
39 620010534R CARRYING IDLER CARRYING IDLER Carrying Idler for 1400mm Belt Width Dimensions: 530 Length x 152.4 Dia. x 5.4 shell thickness). All dimensions/specifications should be as per Drawing Enclosed.
40 621001063R RETURN IDLER 2 PIECES-1400 B/W RETURN IDLER 2 PIECES-1400 B/W Two Piece Return Idler with Pin and `D¿ Shackle for 1400mm Belt Width, All dimensions/specifications should be as per Drawing Enclosed
41 620010535R SC IDLER WITH BRACKET D29297/4 SC IDLER WITH BRACKET D29297/4 ELECON MAKE: S.C.RETURN IDLER WITH BRAKET FOR 1200 MM BELT. DRG.NO.D29297/4
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
declaration certificate.doc
Others - Declaration • 0.02 MB
tender document.doc
Tender Document • 0.07 MB
Annexure- Specifications.xlsx
Technical Information / Worksheet • 0.02 MB
pqr conditions.docx
Others - PQR • 0.02 MB
special conditions.docx
Others - Special conditions • 0.02 MB
Drawings_Guide Roller (6201205199).pdf
Design Document • 0.26 MB
Drawings_620000788R & 620010513R(1600 MM Carrying idler).pdf
Design Document • 0.18 MB
Drawings_620001016R.pdf
Design Document • 0.45 MB
Drawings_620010503R (1600 MM Return Idler).pdf
Design Document • 0.18 MB
Drawings_620010509R & 622120527R (1200 MM Return idler).pdf
Design Document • 0.28 MB
Drawings_620010509R.pdf
Design Document • 0.43 MB
Drawings_620010510R.pdf
Design Document • 0.45 MB
Drawings_620010523R.pdf
Design Document • 0.35 MB
Drawings_620010531R.pdf
Design Document • 0.40 MB
Drawings_620010532R.pdf
Design Document • 0.35 MB
Drawings_620010534R.pdf
Design Document • 0.44 MB
Drawings_620010535R.pdf
Design Document • 0.29 MB
Drawings_620010536R.pdf
Design Document • 0.50 MB
Drawings_620010538R.pdf
Design Document • 0.41 MB
Drawings_620010542R.pdf
Design Document • 0.35 MB
Drawings_620010580R.pdf
Design Document • 0.45 MB
Drawings_620010581R.pdf
Design Document • 0.44 MB
Drawings_620010582R.pdf
Design Document • 0.49 MB
Drawings_620010583R.pdf
Design Document • 0.37 MB
Drawings_620010622R(Self Alighnement Bracket 1200mm).pdf
Design Document • 0.24 MB
Drawings_620010634R (1200mm Return Bracket).pdf
Design Document • 0.25 MB
Drawings_620120502R (1600 MM Impact Idler).pdf
Design Document • 0.19 MB
Drawings_620120609R (1200 MM Carrying Bracket).pdf
Design Document • 0.23 MB
Drawings_621001063R.pdf
Design Document • 0.46 MB
Drawings_621060107B & 622120509R (1200 MM Self aligning return idler).pdf
Design Document • 0.29 MB
Drawings_621120507R.pdf
Design Document • 0.43 MB
Drawings_622001050R & 622120528R (1200 MM Carrying Idler).pdf
Design Document • 0.28 MB
Drawings_622030803R (Dribble Conveyor Roller).pdf
Design Document • 0.18 MB
Drawings_622030804R (1600 MM Single piece return idler).pdf
Design Document • 0.19 MB
Drawings_622120508R (1200 MM Impact idler).pdf
Design Document • 0.30 MB
Drawings_622120517R (1200 MM Aluminium Idler).pdf
Design Document • 0.27 MB
Drawings_622120525R (1200 MM Impact Idler).pdf
Design Document • 0.31 MB
Drawings_622120526R & 620120520R (1200 MM Singe Piece Return Roller).pdf
Design Document • 0.28 MB
Drawings_6200105352R and 6200105361R .pdf
Design Document • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .