SITC of 42 Body Mortuary Cabinates with electrical installations at existing PM room in GMERS Hospital Gotri Vadodara [2ND ATTEMPT]

SITC of 42 Body Mortuary Cabinates with electrical installations at existing PM room in GMERS Hospital Gotri Vadodara

Sr no. Item No. Description Qty. Unit Net Rate In Words Amonut

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected Rupees Forty One

separately erected evaporating unit and blower motor with its accessories by Thousand Seven Hundred

means of extra supplied proper insulated copper tubing,drain PVC pipes Twenty Five and Twelve

suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Paisa Only

Remote Control & MS Stand) with necessary core cutting. (1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton capacity

Supplying and erecting insulated pair of soft copper tubing open or concealed Rupees Nine Hundred Sixty

2 2 including power and control cable,necessary PVC drain pipes for Split AC 20 RMT. 965.56 Five and Fifty Six Paisa

machine up to 4 TR capacity Only

Suppy, Installation, Testing and Commisioning of 6 body mortuary cabinate of

approx. Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -

304 grade sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer

Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C,

Door: Overlap type door with heavy duty hinges & Handles with closer along

with push type gasket for easy operation Size: 32” X 32”, Lock SS: Individual lock

& Key for each door, Identification: Each Window should be facilitated for Body

Identification tag (replaceable),Vapor proof lights, Refrigeration System: Air

Cooled, Split Type and Capable to run at minimum 45 deg C Ambient with CFC Rupees Five Hundred

free refrigerant gas R407C/R404A for low maintenance. Compressor Type : Ninety Thousand Only

Hermetic reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper

fins type Indoor Unit with SS casing capable to maintain low relative

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved,

Power: 415 V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref.

System should be able to achieve temperature within 90 minutes in load

condition and can retain temperature up to 6 hours in case of power loss.

Control Panel: Digital Temperature display with microprocessor-based

controller with additional temperature display & alarm indication with buzzer at

mortuary Chamber surface.

Suppy, Installation, Testing and Commisioning of 4 body mortuary cabinate of

approx. Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -

304 grade sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer

Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C,

Door: Overlap type door with heavy duty hinges & Handles with closer along

with push type gasket for easy operation Size: 32” X 32”, Lock SS: Individual lock

& Key for each door, Identification: Each Window should be facilitated for Body

Identification tag (replaceable),Vapor proof lights, Refrigeration System: Air

Cooled, Split Type and Capable to run at minimum 45 deg C Ambient with CFC Rupees Four Hundred

free refrigerant gas R407C/R404A for low maintenance. Compressor Type : Ninety Thousand Only

Hermetic reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper

fins type Indoor Unit with SS casing capable to maintain low relative

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved,

Power: 415 V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref.

System should be able to achieve temperature within 90 minutes in load

condition and can retain temperature up to 6 hours in case of power loss.

Control Panel: Digital Temperature display with microprocessor-based

controller with additional temperature display & alarm indication with buzzer at

mortuary Chamber surface.

Suppy, Installation, Testing and Commisioning of 2 body mortuary cabinate of

approx. Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -

304 grade sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer

Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C,

Door: Overlap type door with heavy duty hinges & Handles with closer along

with push type gasket for easy operation Size: 32” X 32”, Lock SS: Individual lock

& Key for each door, Identification: Each Window should be facilitated for Body

Identification tag (replaceable),Vapor proof lights, Refrigeration System: Air

Cooled, Split Type and Capable to run at minimum 45 deg C Ambient with CFC Rupees Three Hundred

free refrigerant gas R407C/R404A for low maintenance. Compressor Type : Eighty Thousand Only

Hermetic reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper

fins type Indoor Unit with SS casing capable to maintain low relative

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved,

Power: 415 V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref.

System should be able to achieve temperature within 90 minutes in load

condition and can retain temperature up to 6 hours in case of power loss.

Control Panel: Digital Temperature display with microprocessor-based

controller with additional temperature display & alarm indication with buzzer at

mortuary Chamber surface.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv Rupees One Hundred

6 6 grade ISI marked copper wires of following size to be erected as directed. (j) 150 Mtr. 127.26 Twenty Seven and Twenty

4.00 Sq.mm 3 core round PVC sheathed Six Paisa Only

Rupees One Hundred

7 7 (k) 4.00Sq.mm 4 core round PVC sheathed 500 Mtr. 176.75 Seventy Six and Seventy

Five Paisa Only

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following Rupees Four Hundred

8 8 type, erected on PVC / Metallic/Wooden box, single mounting base frame 53 Pt. 449.45 Forty Nine and Forty Five

covered with textured/metallic/white front plate modules erected on / in wall / Paisa Only

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Eighty Two and

PVC insulated stranded wire of green colour for earth continuity of following Eighty Two Paisa Only

size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Rupees One Thousand

CCT 3000 K to 6500K, Seven Hundred Ninety

Luminaire efficacy> 85 lumens/watt , Four and Seventy Seven

LED driver efficiency > 85 % Paisa Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (B) LED Panel Light

with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Rupees Sixteen Thousand

11 11 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 1 Ea. 16221.61 Two Hundred Twenty One

50 c/s. with all internal connections, spreader tinned copper & complete and Sixty One Paisa Only

erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Rupees One Thousand Six

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB for above Item No

12 12 1 Ea. 1622.16 Hundred Twenty Two and

(The Enclosures should be used of same company of MCCBs to be used)

Sixteen Paisa Only

Providing and erecting busbar chamber confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having current density not Rupees Five Thousand

more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped Seven Hundred Thirty One

with colour insulation tape for phase sequence, three phase & neutral each and Seventy Five Paisa

suitable for following current capacity with necessary painting mounted on wall Only

or pedestal frame of required size with necessary connections.(B) Suitable for

200 Amp. capacity

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

Rupees One Hundred

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

14 14 96 Ea. 112.11 Twelve and Eleven Paisa

erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor & inductive load Rupees Two Hundred

15 15 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 4 Ea. 299.97 Ninety Nine and Ninety

having following capacity (A) 6 to 32 Amp. Cat.III Seven Paisa Only

Rupees Three Hundred

16 16 (B) 40 Amp. Cat.III 10 Ea. 330.27 Thirty and Twenty Seven

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Rupees Seven Hundred

17 17 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 14 Ea. 737.30 Thirty Seven and Thirty

having following capacity (c)63 Amp. Cat.III Paisa Only

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Rupees Five Hundred

18 18 Plug socket, company fabricated powder coated sheet steel enclosure erected 1 Ea. 527.22 Twenty Seven and Twenty

as directed with connection. [A] Metal Clad Socket with metal clad top Cat.III Two Paisa Only

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. Rupees Fifty Two and Fifty

MCB Two Paisa Only

Rupees One Hundred

Sheets steel powder coated enclosure suitable for incorporating One/Two nos.

20 20 10 Ea. 176.75 Seventy Six and Seventy

Five Paisa Only

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Rupees Three Thousand

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

21 21 3 Ea. 3412.79 Four Hundred Twelve and

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

Seventy Nine Paisa Only

suitable for (B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door (iii)8 way

Rupees Three Thousand

Eight Hundred Seventy

Four and Thirty Six Paisa

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees Three Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

23 23 200 Mtr. 378.75 Seventy Eight and Seventy

existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (

Five Paisa Only

Sq. mm 1/2 core)

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

Rupees Seventy Four and

24 24 required depth for laying any size of cable or locating the fault all over the run 150 Mtr. 74.74

Seventy Four Paisa Only

and back filling the same and making the surface as normal ground.

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with Rupees One Hundred

out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core Three and Two Paisa Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to Rupees Twenty Five and

switchgear terminals with brass/cadmium plated nut bolts in an approved Twenty Five Paisa Only

manner. (E) 70 Sq.mm.

Rupees Twenty and

Twenty Paisa Only

Total Amount (without GST) Rs.

Total Amount (without GST) Rs.

Dy. Executive Engineer (Ele.) Executive Engineer (Elec.)

PIU, Vadodara PIU, Vadodara