Construction of ACR at Girls Model Higher Secondary School Rajouri

Earth work in excavatiOn by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed:

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20 % boulder

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth inCement mortar 1 :4 ( 1 cement : 4 coarse sand)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size i(A) Crushed

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 brick work in superstructure above plinth level upto floor V level. (By manual means)

filling excavated earth in trenches

Centring and shuttermg including strutting, propping etc. and removal of form for·

Foundations: footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Edges of slabs and breaks in floors and walls.Under 20cms wide

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.

12mm Cement plaster of mix: 13.4.1 1 : 4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 13.5.1 1 : 4 ( 1 cement : 4 coarse sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

providing and laying stone in horizontal level..

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.21.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete. 9.72.1 125x64x2.50 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :

Providing and fixing bright finished brass handles with screws etc. complete :

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

Providing and fixing of 12 Module Plates

Providing and fixing of AC socket with mini MCB incl 4 module plates

Providing and fixing of 6 amp switch modular

Providing and fixing of 6 Amp modular socket

Providing and fixing of 16 Amp switch modular

Providing and fixing of 16 Amp socket modular

Providing and fixing of 4 way TPN Distribution board double door

Providing and fixing of 63Amp SPN

Providing and fixing of 40 Amp SPN

Providing and fixing of 6-32 Amp 'C' curve MCB S/P

PROVIDING AND FIXING OF LIGHTING POINTS /FAN POINTS IN 1.5 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF APPROVED MAKE INCLUDING PROVIDING AND FIXING OF 6-AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF HEATING POINTS IN 4 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING WITH 2.5 MM PVC INSULATED COPPER WIRE OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 6/16 -AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF WIRING FOR 3-5 PIN 6-AMP SOCKET POINTS IN 2.5 MM PVC COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 5-PIN 6-AMP SWITCH/SOCKET TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF 8-12 WATT LED SURFACE LIGHT FITTINGS (ROUND/SQUARE SHAPE) COMPLETE IN ALL RESPECTS

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

carriages for the materials by mechanical transport

sand for an avg. diatance of 120km M.T

aggregatesize below 40mm for an avg distance of 20 km by mt

bricks for a distance of 130 km M.T

carriages for the materials by Head Load

sand for an avg. diatance of 200m by head load

aggregatesize below 40mm for an avg distance of 200 m by Head Load

bricks for a distance of 200 m by Head Load

steel for an avg. diatance of 200m by head load

Cement bags for an avg. diatance of 200m by head load