NAGAR PANCHAYT MAILANI MAIN Wet Waste Procecing Hetu Pit Compost Ka Nirman Karya

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. DSR 2.28

Excavation in foundation soil (Loam clay or sand ) including lift upto 1.5 metre (5fts) and lead upto 30 Mtr ( 100fts) & including filling watering and ramming of excavated earth into the tremches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of suplus earth as directed Engineer in charge up to distance of 30m (100fts) from the foundation trenches.

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Providing and laying cement concrete in ratio of 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 20 mm nominal size ) including supply of all materials, labour and T&P etc required for proper completion of work.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in ratio of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) as per instruction of engineer incharge

Mild steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete..

Class M-150 brick work in 1:6 cement and coarse sand mortar including material all labour and T&P etc. required for proper completion of work.

12mm thick plaster with cement & C sand of 1.25F.M. mortar in 1:4 including supply of all materials, labour and T&P etc required for proper completion of work

MS iron door and window with ms angle and ms sheet I/C all complete as directed by engineer in charge

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. DSR 12.50

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR 11.37

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one priming coat & two coat of oil painting on new & old iron /wood work including supply etc all comp.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick DSR 9.20.2

Wiring point for light with 1.5 sq mm pvc insulated single core etc complete

Wiring point for fan with 1.5 sq mm pvc insulated single core etc complete

Wiring point for plug with 1.5 sq mm pvc insulated single core etc complete

S/F of 18watt hawels make led bulb etc complete

Septic tank of appropriate capacity of 2 years cleaning period for 50 users

P/F sanitary pipe all fitting

Supply and installation of storage tank on roof etc all complete

P/F GI / PVC pipe etc with all fittings.

P/F WC pan indian type with cast iron P & S trap etc complete

S/F of 20 mm upvc pipe in position all complete

S/F of 15 mm upvc pipe in position all complete

S/F of 25 mm pvc pipe in position all complete

S/F of 30 mm dia socket

S/F 550x400 mm hand wash basin of china white glazedb ware (Hindustan/ cera make) all complete

S/F 455x355x255 mm size lipped urinal basin of china white glazed ware (Hindustan/ cera make) all complete

S/F brass bib cock all complete

S/F PVC low level cistern 10 ltr capacity (Hindustan/ cera make) all complete

S/installation of 1.5 HP submersible pump with Handpump and all T&P proper completion of work.

Supply and fixing of granite stone with letter writing of boards in completed work.