Ruparel W.R. Project Construction of Wireless Room cum Inspection Chowki at Ruparel WRP.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 10 Cr. )

Name of work :- RUPAREL WATER RESOURCES PROJECT

Construction of Wireless Room cum Inspection Chowki at Ruparel WRP.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

PART-A (CIVIL WORK)

1 Demolition including stacking of serviceable materials and disposal of 15.00 Cum. 1108.12

unserviceable materials with all lead and lift (i) RCC work.

2 Demolition of Brick work and stone masonry including stacking of 175.00 Cum. 576.30

serviceable materials and disposal of unserviceable materials with all lead

and lift. In Cement Mortar.

3 Dismentling doors, windows,ventilators etc. (wood or steel) shutters incl. 17.00 Each 196.66

chowkhats architraves, holdfasts and other attachment etc. complete and

stacking them within all lead and lift. (i)Not exceeding 3 Sq.Mt.)

4 Dismentalling tiled of stone floors laid in mortar incl. stackingof 85.00 Sqmt. 50.28

serviceable materials and disposal of unserviceable materials with all lead

5 Excavation in all sort of strata and formations incl. depositing the unuseful 168.00 Cum. 79.00

excavated stuff as and where directed incl sorting and stacking useful

materials as directed upto 200 mt lead and all lift etc. complete incl.

dewatering. (A) IN OVER BURDEN HARD MURRUM.

6 Providing and laying controlled cement concrete M-200 and curing 137.00 Cum. 4108.88

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

7 Providing and laying controlled cement concrete M-200 and curing 15.00 Cum. 4739.67

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and struts upto floor two

8 Providing and laying controlled cement concrete M-200 and curing 30.00 Cum. 4634.26

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

9 Providing formwork of ordinary timber planking so as to give a rough 450.00 Sqmt. 184.69

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of Columns etc. and

10 Providing formwork of ordinary timber planking so as to give a rough 175.00 Sqmt. 323.21

finish including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (G) Columns Pillars Posts and struts. (1) Square

Rectangular Polygonal in plan.

11 Providing formwork of ordinary timber planking so as to give a rough 165.00 Sqmt. 210.34

finish including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

12 Providing formwork of ordinary timber planking so as to give a rough 90.00 Sqmt. 270.19

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of supspened floors

slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

13 Providing formwork of ordinary timber planking so as to give a rough 10.00 Sqmt. 72.35

finish including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (I) Edges of slabs and Breaks in floors and walls.

14 Providing and laying brick masonary using locally available traditional 85.00 Cum. 4877.00

(2nd class) bricks and cement mortar by mass incl. striking out joints,

curing, finishing and scaffolding etc. complete. (a) In C.M. 1:5 For all lead

15 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 3.50 Cum. 4149.51

6- crushed stone aggregates 20 mm nominal size) and curing complete

including cost of formwork in (A) Wall Caps / Coping

16 Providing, cutting, bending, binding and fixing in position as per drawing 5.00 M.T. 76574.00

TMT BAR, reinforcement for R.C.C. works and anchor bars incl cost of

black annealed 16 to 18 BWG M.S.. Wire etc.complete with all lead and lift.

17 20mm thick sand faced cement plaster on walls upto height 10 meters 890.00 Sqmt. 323.21

above ground level consisting of 12mm thick backing coat of CM 1:3 (1-

cement,3-sand) and 8mm thick finishing coat of CM 1:1(1-cement,1-sand)

18 Providing 10mm thick cement plaster in single coat on brick/concrete 300.00 Sqmt. 124.84

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

19 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring, 85.00 Sqmt. 1531.82

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement, 3-coarse sand) finishing withflush pointing in white cement.

20 Providing and laying marble stone slab flooring over 20mm (average) base 20.00 Sqmt. 2247.02

of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty

: 1.5 - coarse sand) laid and jointed with gray cement slurry including

rubbing and polishing complete. (A) Marble slab 25mm thick (upto

21 Providing and laying white glazed tiles 6mm thick in flooring treads of 55.00 Sqmt. 1127.48

steps and landing laid on a bed of 12mm thick cement mortar 1:3: (1-

cement:3-coarse sand) finishing with flush pointing in white cement. (up

22 Providing and laying broken china mosaic flooring for terrace using 12mm 95.00 Sqmt. 779.70

to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar crème out up to surface

using white cement including rounding off junctions and extending them

up to 15 cm along the wall, clearing with water and oxalic acid etc as

23 Extra for Providing and mixing water proofing materials in cement 46.80 Liters or 49.16

concrete in mix proportion recommended by the manufacturers.

24 Constructing a cooking platform 60cm width and 70cm high resting on 4.00 Rmt. 2656.06

B.B.Masonary walls 23cm thick in C.M.(1:6) with (ii) Fixing black kadappa

stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wallin C.M.(1:4) etc.complete.

25 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 100.00 Cum. 3106.67

hand broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

26 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete 660.00 Sqmt. 707.55

block 60mm thick with grade of concrete M300 pneumatic compressed /

vibrated mechanically and as per approved design Confirming to IS

: 2006 including 35 mm Sand layer for levelling and filling the joint with

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

27 Anti-Termite System:Providing and laying of permanent piping technology 95.00 Sqmt. 134.33

anti-termite treatment before flooring work by installing LLDP (Low linear

density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt

pressure compensation chip every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-

clips and nails. The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per building

layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a steel reinforced

grooved flexible pipe of minimum 22 mm ID leading into junction box and

the loops shall terminate in junction boxes & test every junction during

injecting chemicals for termite control treatment. The anti termite

chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be

injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water

at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes dully approved

by Engineer-in-Charge with bond of 5 year warranty.(i)Anti Termite

chemical injected area (Chemical injecting incl. labour cost)

28 Constructing Brick Masonary Septic tank of size (2.54 x 1.34 x 1.75 mt.) 1.00 No. 42244.22

internal dimensions including 100mm thick P.C.C. in 1:3:6 (1-Cement: 3-

Fine Aggregate: 6-Coarse Aggregate), 150mm thick R.C.C. slab top and

bottom in M-20 (1:1.5:3) with FE-500 TMT steel, brick masonary walls in

mortar 1:6 (1-Cement: 6-Sand). 20mm thick cement plaster on outer and

inner side with backing coat of 12mm thick in CM 1:3 and 8mm thick

finished coat of CM 1:1 etc. curing with outlet, inlet, C.I. cover of size 300 x

300mm and not less than 4.53 Kg. Complete.

29 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 17.00 Sqmt. 1674.15

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles shall have, light reflection

85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The

Light weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints

to get required length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at

600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light weight calcium silicate ceiling

tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm

dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’

bottom exposed with 24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights, as per specifications, drawings and as directed by

engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured

from wall to wall. No deduction shall be made for exposed frames/opening (cut

outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC

for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the

best thermal Insulation.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

PART-B (FABRICATION WORK)

30 Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, 8.00 Sqmt. 4074.59

for Doors windows and clearstory windows including anodised alluminium But

hinges with necessary screws, and indian teak wood shutters with. (A) Plywood

sheet panels and With Door Handle, Door Magnet, Door Stopper with its Fixing

31 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress 2.00 Sqmt. 2684.22

panel shutter having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve. With Door Handle, Door Stopper with its Fixing Charge.

32 Providing and fixing extruded aluminium window having extruded aluminium 11.00 Sqmt. 2140.33

colour Powder coated section frame main outer size 127mm x 38.10mm x 1.35mm.

@ Wt.1.384kg/mt, horizontal four track member size 122.20mm x 31.75mmx

1.10mm, @ Wt. 1.205kg/mt. Vertical member of size 122.20mm x 31.75mm x

1.50mm, @Wt.1.398kg/mt. with sliding shutters of horizontal member size

40mmx18mmx1.29mm, Wt.of 0.456kg/mt. @ with 5mm thick transpearent bronze

colour tinted float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. complete for

33 Providing and fixing M.S.grills of required pattern to wooden frames of windows etc. 450.00 Kg. 111.68

with M.S. flats at required spacings and frame alround, square or round bars with round

headed bolts and nuts or by screws(A) Plain Grill.

34 Supply & fixing factory finished cold formed Light guage steel frame sections confirming 1240.00 Kg. 114.44

to SP:6 (5) 1980 at site or work including riveted, bolted or welded in builtup for all

type of sections ,in framed work, cutting, hoisting, fixing in position and applying primer

coat of approved steel primer etc. complete as per structural designs & directions of

Engineer-in-charge.

35 Providing, Fabricating and Erecting 60cms wide steel ladder of M.S. angle 5.00 Rmt. 1113.00

50x50x6mm for HR Well as per drawing and design incl one coat of primer and two

coat of anti corrosive paint etc. complete

PART-C (COLOUR WORK)

36 Applying two coats of putty & two coat of primer of approved brand and 245.00 Sqmt. 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

37 Wall painting (two coats) with plastic emulsion paint of approved brand 880.00 Sqmt. 86.38

and manufacture on undecorated wall surfaces to give an even shade

including thoroughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

38 Finishing wall with weather proof exterior emulsion paint on wall surface 260.00 Sqmt. 122.14

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete.

39 Applying priming coat over new steel and other metal surface after and 25.00 Sqmt. 37.29

including preparing the surface by throughly, cleaning, oil grease dirt and

other foregin matter and scoured with brushes fine steel wood, scrapers

and sand papers with ready mix priming paint brushing red lead.

40 Painting two coats (excluding priming coat ) on new steel and other metal 25.00 Sqmt. 94.39

surface with enamel paint, brushing, inerter to given an even shade

including cleaning the surface an even shade including cleaning the

surfece of all dirt, dust and other forgin matter.

41 Applying priming coat over new wooda and wood based surface after and 35.00 Sqmt. 43.10

the including preparing the surface by throughly cleaning oil, grease, dirt

and other foregin matter, sand papering and knotting © ready mixed paint

brushing priming for enamel.

42 Painting two coats (excluding priming coat) on new wood and wood based 35.00 Sqmt. 94.92

surface with enamel paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other foregin matter sand

papering and stopping.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

PART-D (WATER SUPPLY, PLUMBIMG AND SANITARY FITTINGS)

43 Providing and fixing Urinal of appoved quality including connecting the 1.00 Nos. 1074.86

urinal with waste pipe, tap etc. complete. (A) white earthwareflat back or

corner type size 430 x 260 x 350mm.

44 Providing and fixing wash down water closet (European type, W.C.Pan) 1.00 Each 1356.81

with integral "P" or "S" traps including jointing the trap with soil pipe in

cement mortar 1:1 (1-Cement:1-fine sand) (Seal and cover to be measure

and paid for separately) (A) vitreous China Pattern : (i) in white colour.

45 Providing and fixing plastic seat and cover for wash down water closer 1.00 Each 291.33

with CP brass hinges and rubber buffers (B) black plastic seal and cover.

46 Providing and fixing 12.5 liters low level flushing cistern with a pair of C I 1.00 Each 2370.39

or mild brackets, complete with fitting such as lead valve less syphone,

15mm nominal size brass ball valve with polythene float, CP brass handel

unouns and coupling for connections, with inlet outlet and overflow pipes,

40mm dia porcelian enamalled flush bend including cutting holes in wall

and making good same connecting the flush bend with cistern and closet

(overflow pipe to be measured and paid for seperatly) (A) vitrous china

(1) in white colour.

47 Providing and fixing washbasin with single hole for pillar tap with C.I. or 2.00 Each 1619.42

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings A) vitreous china: ii) Flate back wash basin

550mm to v 400mm size (i) in white colour

48 Providing and fixing cast iron (spun) Nanhi trap of the following nominal 3.00 Each 651.54

diameter of self cleaning design with CI scread down or hinged grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet C) 100mm dia

49 Providing and fixing 600mm x 450mm bevelled edge mirror of superior 2.00 Each 859.41

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screw and washers.

50 Providing and fixing C.P. brass towel rail complete with C.P. brass Brackets 1.00 Each 616.42

fixed to wooden plugs with C.P. brass screw B) 600mm x 20mm size.

51 Providing and fixing C.P. brass waste for wash basin and sink (B) 40 mm 2.00 Each 89.83

52 Providing and fixing M.I fisher union for wash basin and sink (B) 40 mm 2.00 Each 88.65

53 Providing and fixing W.W. gully trap with C.I. grating brick masonry 2.00 Each 1292.19

chamber and water tight C.I. cover with frame of 300mm x300mm size

(inside) with standard weight (i)Square mouth traps. (A)100mmx100mm

54 Providing, erecting, fixing double coated ISI water tank of required 1000.00 Liter 3.95

capacity each with all necessary fittings & connection etc, complete. On

55 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe 40.00 Rmt. 148.12

(SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including costof all materials.

56 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe 20.00 Rmt. 91.84

(SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

57 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe 20.00 Rmt. 72.65

(SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

58 Providing and fixing pillar tap, capstan head, screw down high pressure 8.00 Each 308.73

with screws, shanks and back nuts. (i) 15mm dia.

59 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 1.00 Each 282.16

100mm dia. Each

60 Providing Jet spray heavy duty with S.S. Braided hose 60 cm long. 1.00 Each 308.99

61 Providing and fixing chromium plated brass half trun flush cock of 4.00 Each 254.78

approved quality including fixing in pipe line etc. complete.(i) 20mm dia.

62 Providing and fixing chromium plated, bottle trap with necessary 2.00 Each 295.80

couplings of approved quality for wash basin.

63 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 20.00 Rmt. 897.79

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

64 Aqua Zeep Copper Alkaline Vitamin B12 Minerals RO System with 1 year 1.00 No. 9899.00

PART-E (FURNITURE ITEMS)

65 SOFA- 3 Seater Foam with Tapstry Siz-:72'' 1.00 No. 40000.00

66 Dinning table with 4 Chair Sunmica Finish Size 48'' x 36'' x 30'' 1.00 No. 27000.00

67 Wooden Cot with Box type Size 72" X 36" 2.00 No. 15500.00

68 Wooden Warddrobe Cupboard 3 Door of Plywood with sunmica of size 72'' 1.00 No. 27000.00

69 Mattress 4'' & 40-Density Size 6'x3' with U foam Cover 2.00 No. 7140.00

70 Bed sheet 2.00 No. 1000.00

71 Pillow 2.00 No. 300.00

72 Wooden Executive Table of Size 5' x 3' x 2.5' 1.00 No. 23000.00

73 Revolving Chair : Full back Spe. PU Handel Seat/Back Hi Density Form 1.00 No. 12500.00

Tapestry/Velvet 5-BLade Stand With Hydraulic Gas Lifted System Back

Lock System Heavy Good Quality Of Castor Fitting

74 Visitor Chair(Plastic) 10.00 No. 500.00

75 Steel Cupboard 4 Selves, 20 Gauge Size : 78"X36"X18" 1.00 No. 13000.00

76 Visitor Chair : Steel Visitor Chair Pipe Frame Powder Coated, Seat/Back 6.00 No. 3700.00

Foam/Tapestry Black Colour

77 Grommet Type Curtain up to Sill Level of Size 1.30mt X 1.50 mt 2.00 No. 6030.00

78 Grommet Type Curtain upto Sill Level of Size 1.30 Mt. x 1.50 Mt. 4.00 No. 3870.00

79 Providing and fixing 12 mm thick and 100mm wide pelmet of flat pressed 10.00 Rmt. 221.55

3 layer needed particle board solid core with 25 mm diametre alluminium

curtain Road and brackets including fixing with 25mm x 3mm M.S flat

10cm,long and plugs etc.complete.

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

PART-F (ELECTRICAL WORK)

80 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 30.00 Pt. 456.52

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (i) partial

PVC pipe and drops in oval conduit / PVC casing capping erected concealed

in wall/ceiling complete. Cat. III

81 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 5.00 Pt. 669.63

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed. (i) partial PVC pipe and drops in oval conduit / PVC casing

capping erected concealed in wall/ceiling complete Cat. III

82 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 1.00 Pt. 782.75

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories. [II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (i)

partial PVC pipe and drops in oval conduit / PVC casing capping erected

concealed in wall/ceiling complete.

83 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 12.00 Ea. 503.99

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown. (A)

Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20 (ii) 11-15 watts,

Surge-2 KV Cat. III

84 Supplying and erecting led lamps with following wattage capacity of 220 to 2.00 Ea. 222.20

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iii) 10 to 15 watts

85 Supplying and erecting led lamps with following wattage capacity of 220 to 7.00 Ea. 476.72

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (v) 21 to 30 watts

It. Description of Item (with brief specification and reference to Quantity Unit Rs. in Amount

No. book of specifications) Figures

86 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 5.00 Ea. 3100.70

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, compitible with electronic regulator unit for Speed

Control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required. [Make shall be approved by Engineer in Charge] (A) 1200 mm

87 Supplying & erecting funnel type earthing having earth plate of following 1.00 Ea. 9292.00

size burred in specifically prepared earth pit 3 mtr. below ground with

40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length

of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As per drawing) with

following specification

(C) with 60 x 60x 0.315 cms. Copper earth Plate

88 Providing following type of Modular Type Accessories mounted with PVC / 1.00 Ea. 347.44

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections

as per site situation directed by Engineer In charge.

(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch Cat.III

89 Supplying & erecting approved make low noise decorative exhaust fan 1.00 Ea. 2009.90

having square frame ABS body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

PART-G (BOARDS AT DAM SITE)

90 Providing & fixing Concertina with punched tape concertina coil 600 mm 114.00 Rmt. 271.69

dia 10 meter open able length (total length 90m) having 50 nos rounds per

6 meters length, upto 3 m height of wall with existing angle iron "Y"

shaped placed 2.4 m or 3.0 m apart and with 9 horizontal R Bt reinforced

barbed wire, stud tied with G I staples & G I clips to retain horizontal,

including necessary bolts or G I barbed wire tied to angle iron, all complete

as per direction of Engineer-in-charge, with reinforced barbed tape (R B

T)/ Spring core (2.5mm thick) wire of high tensile strength of

Kg/Sq.mm with tape (0/52 mm thick) and weight 43.478 gm/meter (cost

of M S angle, CC block shall be paid separately.)

91 Providing Murrum including spreading the same and dressing the side 600.00 Cum. 166.00

slope & top surface in required grade and camber with lead upto 1.0 km.

92 Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade 4.50 Sqmt. 7611.27

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc.

complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B)Class B Type-4(MDR/ODR)

retro reflective sheeting.

93 Providing and fixing gauge post with M.S.Channel of size 150x75x5mm of 30.00 Rmt. 821.00

required length as per design with necessary foundation and with painted

enameled plate and fixing it on MS channel etc complete with necessary oil