Karnataka

Active

Works

Buildings

Sub Estimate of providing Furnitures, Kitchen items, Compound wall, Land Scaping, Sewerage treatment plant, Road works and Other necessary works in Govt. Hostel Building (100 Students) in Cluster 7 works at Hassan.

Public Works Department

PWD Division Office Hassan | Hassan, Karnataka

Amount: ₹4.0 CrCloses: 1 Sept 20265d left

Timeline

Published18 Aug 2026
Pre-Bid Meeting24 Aug 2026
Closes1 Sept 2026
Bid Opening2 Sept 2026

Tender Value

₹4.0 Cr

EMD Value

₹6.0 L

Closing Date

1 Sept 2026, 9:30 pm5d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Bharath K.S

Office Number

08172268437

Work Description

Sub Estimate of providing Furnitures, Kitchen items, Compound wall, Land Scaping, Sewerage treatment plant, Road works and Other necessary works in Govt. Hostel Building (100 Students) in Cluster 7 works at Hassan.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT37356

Reference Number

PWD/2026-27/BD/WORK_INDENT37356

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredKPWD Class-II and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 as per KW-4 Rs. 806.40 Lakhs

RequiredSimilar Work done certificate as per KW-4 50 percent amount put to tender i.e., Rs. 201.60Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredLine of credit as per KW-4 Rs. 201.60 Lakhs

RequiredAssessed available tender capacity-AxNx1.5 -B should be greater than or equal to Rs.403.20 Lakhs

RequiredMinimum quantities of work 1. Earth work/Subgrade/Embankment-1065.36Cum 2. PCC/RCC- 363.28 Cum 3. Steel-16.28 Tonne 4. Plastering-1287.23 Sqm 5.Painting-1554.41 Sqm 6.Solid Block work-526.00 Sqm 7.interlocking work-1627.95Sqm

RequiredThe tenderer or his identified sub contractor for executing building Furniture works should have executed similar work of value not less than Rs 85.00 lakhs in any one year during last five years

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. The Tender processing fee shall not be refundable.

The employer reserves the rights to reject one or all Tender without assigning any reasons and Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractors should be registered with KPWD Class II and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per KW-4 and Work should be carried out as per KW-4 STD attached with tender .

The period of completion of this work is 6 Months & the eligible contractor should maintain the work for ONE YEAR after the successful completion of the project.

Contractors has to upload the EPF Registration and Contractors has to submit their labour EPF details with every Running Bill. Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the Executed amount accordingly.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Hassan, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

The FSD payable at the time of executing agreement, will be refunded only after successful completion of Defect Liability Period

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The Contractor should upload original scanned copy of Purchase invoice/RC Book/Sale Deed duly attested by Notary along with original purchase invoice/Ownership transfer in RC book/Hire or Lease Agreement duly attested by Notary along with original purchase invoice or RC book

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The Contractor has to establish Field laboratories and should furnish the documents for having required lab testing equipments.

Confirmations to LOC and work done Certificates uploaded in e-Proc should be received to this office, EE, PWD, HASSAN DIVISION, within 15days from the date of receipt of confirmation request letters to concerned Departments/Banks, otherwise LOC and Work done will be considered as, Not Confirmed and Bids will be Considered for Rejection.

Technical Criteria

General

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

List of Financial Resources with Certificates

Past Experience

ITT Clause 3.2 (c) Executed in any one year i.e 2021-22 , 2022-23, 2023-24, 2024-25, 2025-26 the following Minimum quantities of work 1. Earth work/Subgrade/Embankment-1065.36Cum 2. PCC/RCC- 363.28 Cum 3. Steel-16.28 Tonne 4. Plastering-1287.23 Sqm 5.Painting-1554.41 Sqm 6.Solid Block work-526.00 Sqm 7.Concrete interlocking work-1627.95Sqm

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2(b) To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 (b) Mandating Satisfactorily completion as prime contractor, for atleast one similar nature of Building work to an extent of 50 percent of the cost of the work for all the works value not less than Rs.201.60 Lakhs (Updated to 2026-27 Price Level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (f) The tenderer or his identified sub contractor for executing building Furniture works should have executed similar work of value not less than Rs 85.00 lakhs in any one year during last five years (Updated to 2026-27 Price level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity:(AxNx1.5 -B ) should be greater than or equal to Rs.403.20 lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2026-27 price level) N-Number of years prescribed for completion of the works for which tenders are invited- 6 Months. B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 6 Months. (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 (a)To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 (a) Achieved in atleast two financial years a minimum financial turnover of Rs. 806.40 Lakhs (in all classes of civil engineering construction works only) (Updated to 2026-27 Price Level) (Usually not less than two times the estimated annual payments under this contract)

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs. 201.60 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually the equivalent of the estimated cash flow for three months in the peak construction period) (The fomat should be as per KW-4 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-4

Others

KPWD Class-II and above Registration Certificate

Others -- Valid KPWD Registration Certificate

Contractors has to upload the EPF Registration

Others -- Valid EPF Certificate

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.0 L

Important Dates

Last Activity

18 Aug 2026

Published

18 Aug 2026

Bid Opening

2 Sept 2026

Download Ends

31 Aug 2026

Pre-Bid Meeting

24 Aug 2026

BOQ Preview

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyan...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per...

•

Providing & supplying Stainless Steel sturdy round food plate of 30cm dia made as per direction of Engineer in charge of work ---- With all lead and lift including cost and conveyance of all materials...

•

Providing & supplying Stainless Steel Tumblers with 150ml capacity as per direction of Engineer in charge of work ---- With all lead and lift including cost and conveyance of all materials,labour, hir...

•

Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per di...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work ---- With all lead and lift including cost and conveyance ...

•

Providing and Supplying of Single burner stove of overall dimensions 600 (L) x 600 (W) x 450 (D) mm, body made-up with SS-304 grade with control valve and burner single burner and top sheet shouldn’...

•

Providing and Supplying Dosa stove with Plat Form overall dimensions 1200(L) x 900 (W) x 750 (D) mm body made up with SS-304 grade and shouldn’t be less than 2 mm thick sheet and platform made with ...

•

Providing and Supplying work bench of overall dimension 1200(L) x 600(W) x 750(D) mm. The top sheet made up with SS -304 grade and shouldn’t be less than 2 mm thick matt finished sheet over MS ERW c...

•

Providing and Supplying of 4 Door Commercial Refrigerator/Chiller of 1075 L capacity, with approved make Stainless Steel body, cabinets and doors with SS-430 grade. require voltage of 230 v and 50Hz f...

•

Providing and Supplying Wet Grinder of 20 ltr capacity, Body made with SS-304 grade steel sheet Semi automatic about 1.5 hp motar capacity 1440 RPM working voltage 230 volts AC supply single phase wit...

•

Providing and Supplying Idly Steamer of capacity 108 Idly and body made up with SS-304 grade and suitable thickness stainless steel sheet with 12 tracks and complete the work as per the Specification ...

•

Providing and supplying of Round shaped silver colour anodized aluminium / hindalium vessel of 1 set for cooking. The set should be contain three different size of 10L, 20L and 40L capacity vessels wi...

•

Providing and supplying of Two tier Cot of Size: 1980 L x 760 W x 1980 mm H The vericals shall be made out of 38mm square MS tubes of 16G thick on all the four corners & 19mm square MS tubes in-betwee...

•

Providing and supplying of DINING TABLE with 6 Seater: The overall dimensions of the table should be 1800mm (W) X 800mm (D) X 750mm (H). The table top should be made of SS-202 grade 1mm thick mat fini...

•

Providing and Supplying of Study chair L-Type of Meroan colour of standard size made out of wooden frame, crape polyster material fabric, 12mm plywood used in both seat back rest with melamine mat fin...

•

Providing & fixing of Study table 750mm x 600mm 750mm with 19mm thick one side Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade m...

•

Providing & Supplying of SS-202 grade Storage Rack with 4 Shelves, the overall dimension is 1830mm (L) x 458mm (W) x 1524mm(H). The Verticals should be made with squre/circular steel tube about 50mm d...

•

Providing & Supplying of Shoe stand of 4 shelves over all dimension 810mm (H) x 330mm (W) x 533mm (L) and made up with good quality ISO Certified fiber material. Complete the work as per specification...

•

Providing & Installing of Electrical Heat Pump Water Heater Machine of 200 L Capacity and operates in 3kW three phase power and 415Volts supply. Out flow should be 280 LPH and size about 1000(L) x 365...

•

Providing and Erection of LPG Gas Pipe line, the gas line drawn with 19mm dia Type K Copper pipe with pvc coated, fixing with 19mm clamps and other required fixtures at 150mm interval, at both end sho...

•

Crack Groove Cutting: Groove shall be cut using hand held electrically operated concrete cutting machine of size of 50 mm wide and 75 mm deep on each side of the crack to form as "V" groove all along ...

•

Providing and Supplying Furnitures and Other Works for Construction of girls Govt.Hostel Buildings (10 Students) in Cluster 7 works at Halebeedu in Beluru.

•

Providing & supplying Water resistant No dust plastic broom of minimum 2.5 feet height of good quality with flagged grass bristle for cleaning purpose as per direction of Engineer in...

•

Providing & supplying Water resistant No dust Plastic Dust pan of good quality as per direction of Engineer in charge. ---- With all lead and lift including cost and conveyance of all materials,labou...

•

Providing & supplying hands free squeeze Micro fibre Flat spin Mop with 360 degree flexible head and super absorbent fibre of good quality as per direction of Engineer in charge. ---- With all lead an...

•

Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. ---- With all lead and lift including cost an...

•

Providing and supplying pillow polyester fibre with good sleeping

•

comfort of size 60cm x 40cm as per direction of engineer in charge ---- With all lead and lift including cost and conveyance ...

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- With all lead and lift including c...

•

Installation & commissioning of energy efficient Air Source Heat Pump (ASHP) unit of reputed make with 5 years warranty for Domestic Purpose made of Enamel coated Steel with Mg Anode and havi...

•

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets - 20mm dia heavy pipe ---- With all lead and lift including cost and conveyance of all materials,labour, hire char...

•

Providing & fixing 100% Polyester Curtains with specification of

•

regular wash as per direction of Engineer in charge ---- With all lead and lift including cost and conveyance of all materials...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 40 mm dia ---- With all lead and lift including cost and conveyance of all mater...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 40 mm dia ---- With all lead and lift including cost and conveyance of all mater...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of al...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Supplying & fixing Composite Fibre Reinforced Polymer (FRP) utility cover conforming to IS 12592:2002 with sufficient load bearing capacity as per technical specifications. - Heavy Duty Circular 600 m...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with s...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm ---- With all lead and lift including cost and convey...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. - Size 80 mm ---- With all lead and lift including cos...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprisin go fantiglare clear diffuser with Injection moulded polyc...

•

Providing and Supplying Dosa stove with Plat Form overall dimensions 1200(L) x 900 (W) x 750 (D) mm body made up with SS-304 grade and shouldn't be less than 2 mm thick sheet and platform made with 10...

•

Providing and Supplying work bench of overall dimension 1200(L) x 600(W) x 750(D) mm. The top sheet made up with SS-304 grade and shouldn't be less than 2 mm thick matt finished sheet over MS ERW cyli...

•

Providing and Supplying Wet Grinder of 20 Itr capacity, Body made with SS-304 grade steel sheet Semi automatic about 1.5 hp motar capacity 1440 RPM working voltage 230 volts AC supply single phase wit...

•

Providing and supplying of Stainless steel chapathi maker of capacity 1000 pieces per hour, 1hp motar capacity working voltage 230 volts AC supply single phase, body made up with SS-304 grade steel an...

•

Providing and supplying of DINING TABLE with 6 Scater: The overall dimensions of the table should be 1800mm (W) X 800mm (D) X 750mm (H). The table top should be made of -202 grade Imm thick mat finish...

•

Providing & Supplying of Shoe stand of 4 shelves over all dimension 810mm (H) x 330mm (W) x 533mm (L) and made up with good quality I1SO Certified fiber material. Complete the work as per specificatio...

•

Providing & Installing of Electrical Heat Pump Water Heater Machine of 200 L Capacity and operates in 3kW three phase power and 415Voltssupply. Out flow should be 280 LPH and size about 1000(L) x 365(...

•

Estimate of providing Furnitures, Kitchen items, Compound wall, Land Scaping, Sewerage treatment plant, Road works and Other necessary works in Govt. Hostel Building (100 Students) in Cluster 7 works at Channarayapatna.

•

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomina...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with s...

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work ---- With all lead and lift including cost and conveyance ...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Two tier Cot to MDRS/KRCRS/ P U MDRS

•

Size: 1980 L x 760 W x 1980 mm H The vericals shall be made out of 38mm square MS tubes of 16G thick on all the four corners & 19mm square MS tubes in-between. A S...

•

DINING TABLE 6 Seater: The overall dimensions of the table should be 1800mm (W) X 800mm (D) X 750mm (H). The table top should be made of SS-202 grade 1mm thick brush finish stainless steel. The top fr...

•

Providing & Supplying of SS Storage Rack with 4 Shelves, the overall dimenssion is 1830mm (L) x 458mm (W) x 1524mm(H). The Verticals should be made with squre/circlar steel tube about 50mm dia. and Sh...

•

Providing & Supplying of Electrical Napkin Incinerator Machine about 10 Kg/batch or 50 napkins/day it should be less than 20 min of burning time and burning ability is about 3-5 napkins per cycle. Mil...

•

Providing & Supplying of SS Shoe rack of 4 shelves over all dimension 810mm (H) x 330mm (W) x 533mm (L) and the pipes about 19 mm dia of standard Shape available in the market. complete the work as pe...

•

Providing & Supplying of Single burner stove of overall dimensions 600 (L) x 600 (W) x 450 (D) mm, body made-up with SS-304 grade with control valve and burner single burner and top sheet shouldn't be...

•

Providing & Supplying of Dosa stove with Plat From overall dimensions 1200 (L) x 900 (W) x 750 (D) mm, body made-up with SS-304 grade and shouldn't be less than 2 mm thick sheet and Platform made with...

•

Providing & Supplying of work bench of overall dimension 1200 (L) x 600 (W) x 750 (D) mm, The top sheet made up with SS-304 grade and shouldn't be less than 2 mm thick matt finished sheet over MS ERW ...

•

Providing & Supplying of Wet Grinder of 20 ltr capacity, Body made with SS-304 grade steel sheet Semi automatic about 1.5 hp motar capacity 1440 RPM working voltage 230 volts AC supply single phase wi...

•

Providing & Supplying of Idly Steamer of capacity 108 Idly and body made with SS-304 grade and suitable thickness stainless steel sheet with 12 tracks and complete the work as per the Specification an...

•

Providing & Supplying of Round shaped silver colour anodized aluminium /hindalium vessel of 1 set for cooking. The set should be contain three different size of 10L, 20L and 40L capacity vessels with ...

•

Providing & Supplying of Stainless steel chapathi maker of capacity 1000 pieces per hour, 1 hp motor capacity working voltage 230 volts AC supply single phase. body made up with SS-304 grade steel and...

•

Providing & Installing of Electrical Heat Pump Water Heater machine of 200 L Capacity and operates in 3k W three phase power and 415 Volts supply, Out flow should be 280 LPH and size about 1000(L) x 3...

•

Providing & Erection of LPG Gas Pipe line, the gas line drawn with 19mm dia Type K Copper pipe with pvc coated, fixing with 19mm clamps and other required fixtures at 150mm interval, at both end shoul...

•

Providing and Supplying of 4 Door Commercial Refrigerator/ Chiller of 1075 L capacity, with approved make Stainless Steel body, cabinets and doors with SS-430 grade. Require voltage of 230 v and 50Hz ...

•

Additionalities for Formwork, Centering & Scaffolding. (Earth retaining structures) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries a...

•

Additionalities for Formwork, Centering & Scaffolding. (RCC Roof Slabs) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipment...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per di...

•

Providing and supplying pillow polyester fibre with good sleeping

•

comfort of size 60cm x 40cm as per direction of engineer in charge ---- With all lead and lift including cost and conveyance ...

•

Providing & supplying Water resistant No dust plastic broom of minimum 2.5 feet height of good quality with flagged grass bristle for cleaning purpose as per direction of Engineer in...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of al...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Preparation and Surface Treatment of Formation. - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, t...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

•

Providing & supplying Water resistant No dust plastic broom of minimum 2.5 feet height of good quality with flagged grass bristle for cleaning purpose as per direction of Engineer in...

•

Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per di...

•

Providing and supplying pillow polyester fibre with good sleeping

•

comfort of size 60cm x 40cm as per direction of engineer in charge ---- With all lead and lift including cost and conveyance ...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular s...

•

Providing & supplying plastic bucket of 25 L & Mug of 1.5 L capacity in sets as per direction of Engineer in charge of work ---- With all lead and lift including cost and conveyance of all materials,...

•

Providing & fixing 100% Polyester Curtains with specification of

•

regular wash as per direction of Engineer in charge ---- With all lead and lift including cost and conveyance of all materials...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 40 mm dia ---- With all lead and lift including cost and conveyance of all mater...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 40 mm dia ---- With all lead and lift including cost and conveyance of all mater...

•

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...

•

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...

•

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...

•

Providing & fixing foldable ladder 1500mm height with aluminium

•

body and fibre foot steps ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all...

•

Providing and supplying of DINING TABLE with 6 Scater The overall dimensions of the table should be 1800mm (W) X 800mm (D) X 750mm (H). The table top should be made of -202 grade Imm thick mat finish ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 4-37356.docx

Tender Document • 1.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].