Haryana

Active

Works

Civil Works

Annual maintenance of inter...

Haryana Board Corporation

Sonepat | Sonipat, Haryana

Amount: ₹2.0 LCloses: 23 Sept 2026Due tomorrow

Timeline

Published17 Sept 2026
Closes23 Sept 2026
Bid Opening24 Sept 2026

Tender Value

₹2.0 L

EMD Value

₹3,912

Closing Date

23 Sept 2026, 5:00 pmDue tomorrow

Tender Inviting Organisation

Name

Sh Ajit Singh

Address

DIV Sonepat

Work Description

Annual maintenance estimate for internal roads in Sector - 7, U/E, Sonipat

Tender Information

Tender ID

2026_HBC_548667_1

Reference Number

2026F9826D97 BC9F 456A B37B 083AF1DCB663243HSV

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

90 days

Location

Sonepat

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredSCANNED DOCUMENTS (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹250

EMD Fee Amount

₹3,912

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

24 Sept 2026

Download Starts

17 Sept 2026

Download Ends

23 Sept 2026

Submission Starts

17 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	[17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications	650	P.Sqm	25.79	₹16,763.5
2	[17.29]Built-up-Spray Grout Providing, laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a Base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm	97.5	P.Sqm	308.52	₹30,080.7
3	[17.50]Patch Work with close graded Premix Surfacing/Mixed seal Surfacing 20 mm thickness (Type B) Providing and laying patch work with close graded premixed surfacing material of 20 mm thickness Type B using penetration grade Bitumen VG - 10 @ 1.9 kg per sqm and crushed aggregates of specified grading after trimming the pot holes, removal of failed material, including mixing in a continuous type of HMP, carriage of mixed material and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 508 of MORT&H specifications	650	P.Sqm	162.33	₹1,05,514.5
4	[17.51]Patch work Seal coat Type B Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.	650	P.Sqm	66.55	₹43,257.5

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.85 MB

Work Item Documents

BOQ_628370.xls

BOQ • 0.31 MB

OT0178940.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

[17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications

650

P.Sqm

25.79

₹16,763.5

[17.29]Built-up-Spray Grout Providing, laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a Base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm

97.5

P.Sqm

308.52

₹30,080.7

[17.50]Patch Work with close graded Premix Surfacing/Mixed seal Surfacing 20 mm thickness (Type B) Providing and laying patch work with close graded premixed surfacing material of 20 mm thickness Type B using penetration grade Bitumen VG - 10 @ 1.9 kg per sqm and crushed aggregates of specified grading after trimming the pot holes, removal of failed material, including mixing in a continuous type of HMP, carriage of mixed material and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 508 of MORT&H specifications

650

P.Sqm

162.33

₹1,05,514.5

[17.51]Patch work Seal coat Type B Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.

650

P.Sqm

66.55

₹43,257.5