PERIODICAL SERVICES TO BLDGS AND BOUNDARY/DWARF WALL IN E AND J AREAS AT NAVAL BASE KOCHI UNDER GE NW KOCHI (SECOND CALL)

Amount

Note:- 1. Contractor should cover the floor with tarpoline before commencement of the white wash /OBD or any paint work after completion should clear, if any paint droplet near paint surface, all the rate included in quoted rates. 2. The quoted rates includes the scaffolding or staging upto 10th floor hieght and shaft portion etc 3. The quoted rates include all the safety equipments to be used like glouses, safety belts, helmets, mask, safety goggles etc. 4. Quoted rates includes providing mask. tape wherever required and directed. 5. Contractor should bring all the quantity of paint required as per direction and kept in store as per sample approval and to use immediately as per requirement at site. 6. Contractor painters will be present on all days except sundays and public holidays and shall attend the emergency compalints within 8 hours. If the Contractor fails to attend the complaint an amount of Rs 1000/- per complaints will be deducted from the contractor's payment . And also, during emergencies like VIP visits Contractor alongwith his labourers shall attend the site even if its a sunday or holiday 7. The complaints shall be communicated to the contractor/rep of contractor/site engineer /site supervisor through online complaint management portal / website, SMS, Telephonic calls, letter/register or otehr suitable mean of communication at any time. 8. The nature of complaint (emergency or normal) will be decided by Engr-in-Charge, if contractor is not agreeing to the decision of Engr-in-Charge the same shall be referred to the Accepting Officer whose decision shall be final, binding and conclusive.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and washing the surface with Bleaching powder solution for treatment of fungal growth and applying two top coats of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint) having over and including a coat of exterior water base coat and 1.5mm thick exterior putty wherever required all as specified and as per instructions of manufacturer and as directed. NOTES:- (i) The old surface must be prepared in a manner so that there should not be no impression of dent and surface shall be made even all as per manufacturers instruction before application of emulsion paint / putty/ primer. The cost of materials (like putty, base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of approved manufacturer. The contractor shall give FIVE years of performance warranty for the work executed. Guarantee certificate shall also obtained from the authorised applicator of manufacturer and submitted to GE for record.. (iii).After carrying out preparation of surface the same shall be got approved from Engineer in charge before application of exterior emulsion for each building. (iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor

M&L for Preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for Preparation of old decorated surfaces of walls and applying one coat of colour wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of Ceiling, and applying one coat of white wash complete all as specified and as directed.

M&L Preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for complete removal of old finishes surfaces of walls including washing rubbing down and stopping of distempered and painted and applying two coats of acrylic distemper oil emulsion over and incl a coat of exterior water suitable primer and 1.5mm thick wall care putty including filling of nail holes/disturbed surface by cementitious wall care putty all as specified and as directed.

M&L for Preparation of existing old treated surface and applying one coat of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint) or equivalent from the list of makes) at any storey, including provn and removal after use, of necessary scaffolding, complete all as specified and as directed

M&L for complete removal of existing treatment on internal walls and preparation of surface by applying a layer of 1.5 mm thick wall care putty and applying two coat of Interior Plastic emulsion paint (ASIAN ROYALE or equivalent from the list of makes) over a coat of suitable primer complete all as specified and as directed

M&L preparing old treated surface of wall and applying one coat cement based paint complete all as specified and as directed Make:- Berger Durocem/indigo royal indigocem/Snowcem plus or any approved make as approved by GE

M&L preparing old treated surface of wood or wood based material of any description including filling of holes by filler (fevicol and wooden dust) exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparing old treated surface of wood or wood based material of any description including filling of holes by filler (fevicol and wooden dust) exc 10 cm width or girth and applying two coats of synthetic enamel paint all as specified

M&L preparing old treated steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparation of old painted surfaces of wood and wood based materials of any description including filling of holes by filler (fevicol and wooden dust) one coat of synthetic varnishing of any description over 10cm in width or girth including cleaning and preparing the surface all as specified

M&L preparation of old painted surfaces of wood and wood based materials of any description including filling of holes by filler (fevicol and wooden dust) one coat of French polishing of any description exc 10 cm width or girth including cleaning and preparing the surface all as specified

Taking down cement plaster, in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material, complete all as specified and directed.

M&L for rendering 10mm thick on brick work or concrete wall surfaces in cement mortar 1:6, finished even & smooth without using extra cement all as specified and directed

M&L for rendering 15mm thick on brick work or concrete wall surfaces in cement mortar 1:4 finished even & fair all as specified and directed

M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 finished even &smooth without using extra cement all as specified and directed

M&L for applying two coats of cement base paint over a priming coat after preparation of newly plastered/concrete surfaces complete all as specified.

M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primer to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered ceiling surfaces and application of three coats of white wash all as specified and directed

kanjirathingal builders (BID ID -3109510)

LAKSHMI BUILDERS (BID ID -3124778)

SAGA ENGINEERS (BID ID -3109733)

T K BUILDERS (BID ID -3111605)

M/s T.P SHAJI (BID ID -3112472)

Aarjay Tech Engineering (BID ID -3111992)