THE SYSTEM DESIGN PROCUREMENT MANUFACTURING TESTING SUPPLY INSTALLATION AND COMMISSIONING OF 2 NOS 40 KL EACH STORAGE TANK MOC MS FOR PETROLEUM CLASS C ALONG WITH PIPELINE AND RELATED CIVIL WORKS AT SITE MIXED BULK EXPLOSIVES SUPPORT PLANT AT JAYANT

Supply of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3250 mm dia . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulatedby 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected.

Supply of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers

Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2"

Supply of oil pipe- 2" Dia, MS along with 04Nos. valves and fitting with heat tracing and insulation

Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings

Supply of 50NB valves for Steam Piping

Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate

Supply of 25NB valves for Steam Piping

Supply of float type 25 NB Steam Traps

Cable 1100V Grade Multi strand Armoured Cable as per IS:7098 (Part-1)/1988 along with Cable Gland Double compression type and Cable Lug (Aluminium) as per site requirement - 4CX16 Sq mm. Al. XLPE CABLE

Description of Work / Item(s)

Installation & Commissioning of Storage Tank (MOC-MS) Tank of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3250 mm dia . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulatedby 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. I&C of MOTOR STARTER PANEL/BOX and cable laying under ground including excavation, sand cushioning, protective covering and refilling the trench or on cable tray as per side condition including end termination with necessary glands and lugs for the items mentioned in BoQ1 Item No. 10 and 11.

Installation & Commissioning of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers along with necessary supports, hooks and grouting etc

Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump

Installation & Commissioning of oil pipe- 2" Dia, MS along with 04Nos. valves and fitting with heat tracing and insulation along with necessary supports, hooks and grouting etc

Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings along with necessary supports, hooks and grouting etc

Installation & Commissioning of 50NB valves for Steam Piping

Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate along with necessary supports, hooks and grouting and underground laying etc

Installation & Commissioning of 25NB valves for Steam Piping

Installation & Commissioning of float type 25 NB Steam Traps

Construction of RCC foundation of size approx. 6m (B) x 10m (L) of suitable strength to withstand the load of 2 Nos. oil Storage Tanks and Brick Dyke Wall approx. 6m (B) x 10m (L) x 0.8m (H) x 0.25m (W) with Cement Mortar finishing and 1 No. RCC Hard Stand of size 4m (B) x 8m (L) x 0.2m thick and 1.8 mtr. height High Chain Link Fencing of approx. size 20m x 20m covering Dyke Wall and Hard Stand with approx. 5m x 1.5m MS Gate

GMP Systech Engineering Pvt.Ltd.

Pioneer Diligence

ASSOCIATED ENGINEERS INDIA

Spectra India

Pioneer Diligence

GMP Systech Engineering Pvt.Ltd.

ASSOCIATED ENGINEERS INDIA

Spectra India