J&K

Active

Works

Repair and Maintenance Works

MID/J/72

I and FC

manyal brahmna | Jammu, Jammu And Kashmir

Amount: ₹1.0 LCloses: 22 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes22 Oct 2026
Bid Opening22 Oct 2026

Tender Value

₹1.0 L

EMD Value

₹2,020

Closing Date

22 Oct 2026, 12:00 pm3d left

Tender Inviting Organisation

Name

XEN MID JAMMU

Address

mid jammu

Work Description

enit 72 dated 13 oct 2026

Tender Information

Tender ID

2026_IFC_328075_1

Reference Number

MID/J/e-NIT/2026-27/72

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Item Wise

Period of Work

7 days

Location

manyal brahmna

Source Website

Subscribe to view

Eligibility / Pre-Qualification

as per tender notice

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of tender fee (treasury challan). (.pdf)

RequiredScanned copy of EMD (FDR/CDR (.pdf)

RequiredScanned copy of proof of DIC registration certificate/MSME registration certificate (.pdf)

RequiredScanned copy of the GST registration certificate. (.pdf)

RequiredCertificate to the effect of having accepted terms and conditions (.pdf)

Requiredcopy of PAN Card (.pdf)

RequiredExperience certificate of having completed similar nature of work (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

Executive Engineer MID JAMMU

EMD Fee Amount

₹2,020

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

13 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

13 Oct 2026

Bill of Quantities

Item WiseBoQ_Ver3.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no. 3 at LIS Manyal Brahmna along with allied works.
1.01	Repair of 05 cusec HC pump of unit no.3 at LIS Manyal Brahmna by decoupling from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5Cusec HC casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Job also includes repair to the pump shaft by remetalling, turning, aligning, threading at ends and making of new keyways and its proper adjustment. Providing and fitting of new bushes-2 Nos., check nut, new gland rings, bearings as per sample-2Nos., new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, Complete reassembling of pump set and shifting back to LIS Manyal Brahmana and then fitting/reinstallation at the base frame..Providing and fitting of new coupling set in place of old coupling along with new coupling nuts & bolts and rubber bushes.Coupling with the motor by making proper alignment and testing on partial/full load. Complete job including cost of material and labour charges at site.01 Job68,000/-68,000.00Dismantling of damaged motor 50HP of unit no. 3 at workshop for extraction of rotor, cleaning the rotor. Repair to rotor of motor by way of providing/fitting of new bearings (DE & NDE i.e 6213 and 6210 ) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, repairing to bearing housing, providing/fitting of bearing end cover plates and greasing of the same. Back carriage to site after repairs and reinstallation of motor and testing on idle and load conditions .Repair to the 50HP starter of unit-3 by way of dismantling of the starter at workshop and replacement of intermediate bakelite rod, moving and fixed contact points, no volt coil, thimbles, overload protection relay. Back carriage to site after repairs and reinstallation of motor and starter. Providing and filling of approx. 8litres of fresh transformer oil to starter after de-moisturizing of old one. Testing of motor and starter on no load and full load conditions at site. Complete job including cost of material, labour charges and transport charges involved.	1	Job	-	-
1.02	Rebate on Old Parts	1	Job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.50 MB

Work Item Documents

SBD72.pdf

Additional Documents • 0.56 MB

BOQ_1110486.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no. 3 at LIS Manyal Brahmna along with allied works.
1.01	Repair of 05 cusec HC pump of unit no.3 at LIS Manyal Brahmna by decoupling from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5Cusec HC casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Job also includes repair to the pump shaft by remetalling, turning, aligning, threading at ends and making of new keyways and its proper adjustment. Providing and fitting of new bushes-2 Nos., check nut, new gland rings, bearings as per sample-2Nos., new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, Complete reassembling of pump set and shifting back to LIS Manyal Brahmana and then fitting/reinstallation at the base frame..Providing and fitting of new coupling set in place of old coupling along with new coupling nuts & bolts and rubber bushes.Coupling with the motor by making proper alignment and testing on partial/full load. Complete job including cost of material and labour charges at site.01 Job68,000/-68,000.00Dismantling of damaged motor 50HP of unit no. 3 at workshop for extraction of rotor, cleaning the rotor. Repair to rotor of motor by way of providing/fitting of new bearings (DE & NDE i.e 6213 and 6210 ) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, repairing to bearing housing, providing/fitting of bearing end cover plates and greasing of the same. Back carriage to site after repairs and reinstallation of motor and testing on idle and load conditions .Repair to the 50HP starter of unit-3 by way of dismantling of the starter at workshop and replacement of intermediate bakelite rod, moving and fixed contact points, no volt coil, thimbles, overload protection relay. Back carriage to site after repairs and reinstallation of motor and starter. Providing and filling of approx. 8litres of fresh transformer oil to starter after de-moisturizing of old one. Testing of motor and starter on no load and full load conditions at site. Complete job including cost of material, labour charges and transport charges involved.	1	Job	-	-
1.02	Rebate on Old Parts	1	Job	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no. 3 at LIS Manyal Brahmna along with allied works.

1.01

Repair of 05 cusec HC pump of unit no.3 at LIS Manyal Brahmna by decoupling from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5Cusec HC casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Job also includes repair to the pump shaft by remetalling, turning, aligning, threading at ends and making of new keyways and its proper adjustment. Providing and fitting of new bushes-2 Nos., check nut, new gland rings, bearings as per sample-2Nos., new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, Complete reassembling of pump set and shifting back to LIS Manyal Brahmana and then fitting/reinstallation at the base frame..Providing and fitting of new coupling set in place of old coupling along with new coupling nuts & bolts and rubber bushes.Coupling with the motor by making proper alignment and testing on partial/full load. Complete job including cost of material and labour charges at site.01 Job68,000/-68,000.00Dismantling of damaged motor 50HP of unit no. 3 at workshop for extraction of rotor, cleaning the rotor. Repair to rotor of motor by way of providing/fitting of new bearings (DE & NDE i.e 6213 and 6210 ) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, repairing to bearing housing, providing/fitting of bearing end cover plates and greasing of the same. Back carriage to site after repairs and reinstallation of motor and testing on idle and load conditions .Repair to the 50HP starter of unit-3 by way of dismantling of the starter at workshop and replacement of intermediate bakelite rod, moving and fixed contact points, no volt coil, thimbles, overload protection relay. Back carriage to site after repairs and reinstallation of motor and starter. Providing and filling of approx. 8litres of fresh transformer oil to starter after de-moisturizing of old one. Testing of motor and starter on no load and full load conditions at site. Complete job including cost of material, labour charges and transport charges involved.

Job

1.02

Rebate on Old Parts

Job