PROVISION OF LANDSCAPING AND GREEN LUNG SPACES NEAR BLDG NO T153 SWARNA JYOTHI AT INS CIRCARS AND ADDITION and ALTERATION AND SPECIAL REPAIRS TO LANDSCAPING AT BLDG NO. P 41, NAVAL OFFICERS INSTITUTE UNDER AGE B R-II OF GE NB VISAKHAPATNAM

Amount

Phase - I: Schedule "A" Part - I [Provision of Landscaping, addition alteration & special repairs ]:

M&L for preparing the soil base for planting grass by levelling the base to required slopes and levels, supplying and spreading 02 parts of sand, 01 Part of bio fertiliser and one part of red loamy virgin soil for growth of grass to an average thickness of 300mm including mixing vermin compost etc., to improve the fertility of the soil in the required proportion and finally preparing the soil base suitable for planting carpet grass etc. including remoal surplus debris outside MoD land, complete all as specified and as directed.

M & L for planting ever green grass of natural Korean/mexican feather carpet grass of approved pattern over the prepared base lawn/carpet area with good earth over the prepared base including watering, removing the weeds or any other vegetation, mixing the manure from time to time and pesticides as required for healthy growth as per standard gardening practice complete all as specified and directed.

M & L for planting of hedge plants bougainvillea (height of plant not less than 3 Feet above ground level) of approved spacies at a spacing not exceeding 300mm C/C including excavation of pit of min dimension 50cmx50cm50cm and removal of excavated earth to outside the MD land, preparation of ground upto 30cm deep and filling with good earth, cow dung, vermi composit and watering etc complete all as specified and directed.

M & L for planting of crotons, hedge plants/sapling Acalypha variegated duranto/ boxwood (height of plant not less than 3 Feet above ground level) of approved spacies at a spacing not exceeding 200mm C/C including excavation of pit of min dimension 50cmx50cm50cm and removal of excavated earth to outside the MD land, preparation of ground upto 30cm deep and filling with good earth, cow dung, vermi composit and watering etc complete all as specified and directed.

Supply and planting Flower plant with pots of approved species viz Lantama varities/ Plumeria Pudica/ Alamanda mini/ Ixoras/ button rose of hight not less than 2 feet above GL including necessary earth work and providing cow dung manure etc obtained from nurseries complete all as specified and directed.

Supply and planting Ornamental Shrubs like baby crotons/erranthemum vatiedieds/ Thujas/ Furcuria of hight not less than 7 feet above GL including necessary earth work and providing cow dung manure etc complete all as specified and directed.

Supply and planting border plants viz Pendanus/Blueemarald/Latina Varities of hight not less than 2 feet above GL including necessary earth work and providing cow dung manure etc complete all as specified and directed.

S & F Ornamental crotons palm varieities like Royal Palm/Fishtail Palms/Foxtail Palm/Viechiemowcry/ Green including necessary earth work and providing cow dung manure, brick edging around the plant complete.

Supply and planting Ornamental plants Cycas revoluta gymnosperm species in pit size 800x800x800mm hieght not less than 6 feet including necessary earth work and providing cow dung manure etc complete all as specified and directed.

Supply and planting Mirchi mari gold plant species in pit size 1000*1000*1000mm hieght not less than 12 feet including necessary earth work and providing cow dung manure etc complete all as specified and directed.

S & F 15 mm bore, pop up sprinkler with maximum throw radius 12 mtr, discharge rate 12.5 ltr/ min, adjustable 360 degree full circle or adjustable from 20 degree to 360 degree and suitable with max pressure 4.8 Bars, ptmt sprinkler , screwed down, screwed for iron or hdpe pipe or for brass ferrule complete MAXI-PAW by RAIN BIRD or euievalent as per manufacturer instructions complete all as specified and directed.

Excavation over areas not exceeding 1.50 m in depth and getting out in Soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance exceeding 5 Km but not exceeding 10 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Excavation in trenches in soft/loose, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M & L for Hardcore of gauge exceeding 63mm and not 100mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 20mm graded stone aggregate as in sub base, surface finished fair and even complete all as specified and as directed.

M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for Chequered Cement Concrete Tiles of size 300 X 300 mm, 25mm thick, Hydraulically pressed as in Floors, set jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 of cement complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.complete all as specified and as directed.

Supply, laying, connection and testing, 50mm bore, High density poly-ethylene pipes(HDPE) of pressure rating 6 kgf/sq.cm fixed complete to alls, ceilings or in floors etc complete all as specified and directed.

S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S & F for mild steel Plates (plain or chequered),FE-290,Grade E-165 of 10mm thick, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as required at site complete all as specified and as directed.

S&F 18 mm thickness Alstone Brand WPC Grill Jali board (WPC Decorative jail 18mm thick for size 10 fit x 4 feet (Note:- Fixed with MS hollow Square tube section 50mm x50mm vetical at every 2 feet , MS Hollow Square tube section 50mm x 25mm horizontal top bottom of Jali with MS plate with suitable holes to fix 04 N0’s 10 mm dia anchor bolt for each plate complete all as specified and directed. Note:-(MS Tube and plate to be measured and paid saparately.)

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Dismantling of stone slabs and tiles in flooring, apron etc of any description or thickness laid dry and pointed in any mortar complete all as specified and directed.

M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.

Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish off the primises complete all as specified and as directed.

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 500M complete all as specified and as directed.

Taking down or up steel tubing and connections for 50 mm bore of pipe including cleaning and refixing the same at same place or new place on wall/ceiling with necessary fittings complete all as specified and as directed.

S & F Stainless Steel Railing made with Stainless Steel Pipes of wall thickness not less than 1.6mm, of Grade AISI 316L, standard quality, bright polish finish, using 50mm dia pipes for hand rail, 25mm dia pipes for vertical supports / balusters and 25mm dia pipes as in tie bars in three layers, SS tubes shall be welded at the turnings and junctions, welded portions shall be completely grinded and brought to bright and smooth finish including all bends, elbows, making holes in the floor / steps, grouting with epoxy to achieve full strength of railing complete all as specified and as directed.

S & F for stainless steel Cascade Water Fall blade height 10 cm of length 120cm / 48 inches complete all as specified and as directed.

M & L for Plain / Reinforced cement concrete Type B1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate in lintels,bands,coping,benching, bed block etc up to 1.5m span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed.

S & F GI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed.

S & F GI water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed.

S & F PP-R Gate Valve (Brass insert) as per requirement at site complete all as specified and as directed.

M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 350 mm/350mm X 250mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.

M & L for Hi-traffic tiles of size 600 x 600 mm, 15 mm thick as in deck flooring, floor/path, set and jointed in neat cement slurry with grey cement and pigments including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Make: ENDURA Hi-traffic tiles of Johnson or equivalent in makes specified in Particular specifications.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for forming fair finished drain or channel of 60cm inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.

Taking down MCCB DBs, MCB DBs, SPN / TPN Enclosures including MCCBs, MCBs etc of any description and any capacity and making good the disturbed surfaces all as per existing complete all as specified and as directed.

S & F MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.

S & F MCB, SPN, 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed.

S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed.

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable submain wiring and wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit.

S & F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.complete all as specified and as directed.

S & F 10 W LED bollard light 2 feet long colour: WW IP65 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and as directed.

S & F CPVC Pipes 25 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S & F Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe etc complete all as specified and as directed.

Supply, fixing, testing and commissioning of single phase end suction monoblock submersible pump of 1HP 230V, head upto 32 m complete all as specified and as directed. Make:-Kirloskar KOSi-135 or equivalent approved make.

Supply, install and testing of single phase DOL control panel suitable for above mentioned pump with voltage range 240V,Relay range6-10A including all fixing accesaries complete all as specified and as directed. Make:-Crompton Cat No. CHP 15 or equivalent approved make.

S & F Rigid non-metalic 20 mm dia PVC conduit exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducer, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hook etc. including taking down old unserviceable pvc conduit complete all as specified and as directed.

S & F 1.5Sqmm 3 core PVC insulated sheathed copper flexible cable for laying in ground and connecting to the garden light, flood lights,strip lights complete all as specified and as directed.

S & F 2.5Sqmm 3 core PVC insulated sheathed copper flexible cable for laying in ground and connecting to the submersible pump of 1 HP capacity complete all as specified and as directed.

S & F Flexible LED strips outdoor with uniform light distribution and long lasting adhesive for perfect cove lighting solution, 24 watts, 3000K with uniform light distribution and fixed with long lasting adhessive complete all as specified and as directed.

S & F LED aluminium profile W15.8 X H 15.8 having color W/WW/RGB cat Part No. ACE-F122 or euivalent approved make.complete all as specified and as directed.

S & F 18 W outdoor linear wall washer light RGB color with aluminium housing 65.2mm with 30 degree beam angle with IP65 protection,uniform light distribution and long lasting adhesive and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Make:-Jaquar Cat No. IST-WW-LSTP04X005XW or equivalent approved make.

Phase - II: Schedule "A" Part – II: [Maintenance of Arboriculture Works during Defect Liability Period of work under Phase – I i.e. 24 Months]:

Maintenance of Arboriculture / Plants / Grass as provided under Serial Item No. 2 to 12 of this BoQ by weeding, hosing, saucer melding once in every 15 days, planting new Plants / Grass in place of dead Plants / Grass of same species and height with out any extra cost to the department and as directed complete during Defect Liability Period complete all as specified and as directed. Note: Rate quoted shall be deemed to include for all labour, materials, tools & plants and regular watering, using sprinklers, including supply and spreading / spraying organic manure, chemical fertilisers, pesticides to the required extent complete all as specified.However, water shall be supplied by MES free of cost for maintaining the grass and plants.

SREE VIGNESWARA CONSTRUCTIONS (BID ID -3473781)

SAI KRISHNA ASSOCIATES (BID ID -3469440)

G Srinivas Rao (BID ID -3469285)

RAGHU RAMA PANDA (BID ID -3472984)

S V S ENTERPRISES (BID ID -3474364)