Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹87,000
Closing Date
23 Sept 2026, 6:00 pm
Aayush Kumar Singh
Holta camp palampur
SPL REPAIR TO BLDG NO DY 26 ALONGWITH ATTACHED BATHROOM OF 39 INF DOU AND BLDG NO P 7 AND M 40 OR LIVING LINE OF 539 ASC BN UNDER GE PALAMPUR
2026_MES_787496_1
GEP-70/2026-27
Open Tender
Civil Works
Item Rate
270 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹87,000
2 Sept 2026
2 Sept 2026
30 Sept 2026
2 Sept 2026
23 Sept 2026
16 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1S&F for Pre-painted galvalume zinc coating alloy based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 mpa as in roof covering /cladding to wall, fixed with self tapping screw including dismantling of steel sheeting, any gauge, thickness., complete all as specified and directed. | |||||
| 2S&F for Pre-painted galvalume zinc coating alloy based Plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 mpa as in roof covering /cladding to wall, fixed with self tapping screw , including dismantling of steel sheeting, any gauge, thickness., complete all as specified and directed. | |||||
| 3Dismantling timber scantling 40 sq cm & over in section , any position in unframed work.complete all as specified and directed. | |||||
| 4M&L for Form work Rough finish to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as spfd and directed. | |||||
| 5 | M&L for Formwork to sides of fair finished flat surfaces sides of concrete sides and soffits of roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed. | 46.5 | Sqm | - | - |
| 6 | M&L for RCC (Nominal mix), 1:1.5:3 Type A1, (20 mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves including form work and the like, complete all as spfd and directed.
Note :- Reinforcement if used shall be measured and paid separately under relevant item. | 0.35 | Cum | - | - |
| 7 | M&L for RCC (Nominal mix), 1:1.5:3 Type A1, (20 mm graded aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5 m span. complete all as spfd and directed.
Note :- Reinforcement if used shall be measured and paid separately under relevant item. | 5 | Cum | - | - |
| 8M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | |||||
| 9 | M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.complete all as specified and directed. | 320 | Kg | - | - |
| 10S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_882595.xls
BOQ • 0.56 MB
td.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .