Construction of youth training and development centre at Ghumarwin District Bilaspur HP including internal and external water supply and sanitary installation

Amount

Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material in all leads and lifts.

Suspended floors, roofs, landings, balconies and access platform.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (excluding landings) except spiralstaircases.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Add for using extra cement in the items of design mix over and above the specified cement content therein. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Extra for providing richer mixes at all floor levels. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of material in all leads and lifts.

All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand :16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding cost of form work laid in depressed portion of slab/ under flooring including carriage of material in all leads & lifts.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including carriage of material in all leds and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor-V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor-V level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position Sal wood with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). including carriage of material within all leads & lifts.

Providing and fixing 40mm thick panelled door shuters made of 2nd class deodar wood having style and top rail 100mm width and bottom rail 200mm width lock rail 150mm width with panel insert of 12mm thick commercial veneered flat pressed ply wood board of BWP grade confirming to I.S. 303-1975 and bounded with BWP type synthetc resin confirming to I.S. 848-1974 including providing and fixing 2nd class deodar wood beading of size 38X20mm along the panels on both faces of shutters and providing wooden cleats and ISI marked black enamelled M.S. butt hinges with necessary screws all complete as per drawing & specification and instructions of Engineer-In-Charge including carriage of material in all leads and lifts.

Providing and fixing 40mm thick single/double leaf glazed window shutter made of 2nd class doedar wood having style and top rail and bottom rail 75mm width and chamferred edged moulding 20X12mm for glass panes complete including bright finished balck enamelled iron hinges with necessary screws including carriage of material in all leads and lifts.

Providing and fixing 2nd class deodar wood 40 mm thick wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G. with wire of dia 0.56 mm for doors windows and providing and fixing 2nd class deodar wood chamfered edged beading of 20 x 12 mm including bright finished black enemelled iron hinges with necessary screws complete as per drawing and specification & as per instruction of Engineer-in-Charge.

Providing & fixing glass panes with putty and nails in doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes including carriage of material in all leads and lifts

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete including carriage of material in all leads and lifts. (a) Fastener with threaded dia 12 mm.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel /wood windows by welding including carriage of material in all leads and lifts.

Providing and fixing 1st class indian teak wood plain square edged cover fillets(beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions. including carriage of material in all leads and lifts.

Providing and fixing aluminium sliding door bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. (a)300x16mm

Providing and fixing Anodised Aluminium tower bolts (barrel type) of required shade and colour with screws, etc. complete including carriage of material in all leads and lifts.

Providing and fixing aluminium handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts.

Providing and fixing bright finished brass hard drawn hooks and eyes:- 150mm including carriage of material in all leads and lifts.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts. (a) 25 mm thick.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size/colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads and lifts.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement including carriage of material in all leads and lifts. (a) 18 mm thick

Providing and fixing glass strips in joints of terrazo/ cement concrete floors including carriage of material in all leads and lifts. (a) 40 mm wide and 4 mm thick.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including carriage of material in all leads and lifts. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including carriage of material in all leads and lifts. Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge including carriage of material in all leads & lifts. (a) Size of Tile 600x600 mm.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material in all leads and lifts 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material in all leads and lifts.

Bend 87.5° 110 mm bend

Plain Shoe 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.including carriage of material in all leads and lifts:-110 mm diameter

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts.

In gratings framed guard bars, ladders, railling, brackets and similar works.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry. including carriage of material in all leads and lifts.

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts. .

CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mix including carriage of material in all leads and lifts. Cement mortar 1 : 6 (1 cement : 6 fine sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications (a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material in all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications (a)Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of material in all leads and lifts.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. INTERNAL WORK - EXPOSED ON WALL including carriage of material in all leads and lifts. (a) (16mm O.D.) outer Dia)

1216 (16mm O.D.) pipe.

1620 (20 mm OD pipe).

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts:-25 to 40 mm nominal bore

Providing and fixing G.I./M.I Union of following sizes (where not included in the items including carriage of material in all leads and lifts.

15 mm nominal Size

20 mm nominal Size

Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts.

15 mm nominal Size

20 mm nominal Size

Providing and fixing high pressure a PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts.

75 mm dia

110 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc, complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc., complete, including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC cowl (confirming to B.I.S specification) including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing 110mm x 75 mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts.(a) Ordinary closet.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc complete including carriage of material in all leads and lifts.(a) 110 mm dia.

Providing and fixing white plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of material in all leads and lifts. (Hindware, Cera.)

Providing and fixing coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of material in all leads and lifts.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- including carriage of material in all leads and lifts.(a) Flat back (i) 550mmx400mm

Providing and fixing 32mm dia C.P. brass waste for wash basin or sink:, and confirming to BIS specifications.incldung carriage of material in all leads and lifts.(ESS-ESS/ CZAR/ NOVA)

Providing and fixing 32 mm dia M.I. Union for wash basin or sink including carriage of material in all leads and lifts.

Providing and fixing 32 mm P.V.C. waste pipe for wash basin or sink including carriage of material in all leads and lifts.

Providing and fixing 100 mm dia cromium plated stainless steel grating confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing 600mmx450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brassscrews and washers including carriage of material in all leads and lifts and confirming to BIS specifications. (Atul, Modi Guard, Saint Gobains)

Providig and fixing C.P. brass towel rail complete C.P.brass brackets ( fixed to wooden plugs with C.P. brass screws , and confirming to BIS specifications,600mm x20mm, including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws.including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing C.P. brass Toilet paper holder and confirming to BIS specifications.incldung carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Proving and fixing C.P. brass bib tap with capstan head 15mm dia, long body and confirming to BIS specifications, including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Proving and fixing C.P Brass pillar tap with Capstan head 15mm dia, and confirming to BIS specifications, including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing C.P.brass angle valve 15 mm without nuts and pipe including carriage of material in all leads and lifts. (Confirming to B.I.S. specification) (ESS-ESS/ CZAR/ NOVA)

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement:2 sand :4 gradedstone aggregate 20mm nominal size) , foundation concrete 1:4:8 ( 1 cement :4 sand:8 gradded stone aggreagate 40 mm nominal size) in side plastering 15mm thick with cement mortar 1:3 ( 1 cement :3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement: 2 sand:4 graded stone aggregate 20mm nominal size) , finished smooth complete, curing and testing including carriage of material in all leads and lifts.

Inside size 800x800mm and 500mm deep including SFRC Cover with frame (medium duty) total weight of cover and frame to be not less than 173 kg (weight of cover 103kg on and weight of frame 70 kg With 230 mm walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand)

Providing and fixing polythene water storage tank for storage of water up to all heights keeping water hygenic and safe for drinking etc.moulded to seamless perfection from FDA approved grades of polythene (LDPE / HDDE / CIDPE) confirming to BIS-12701-1989 with 40 mm nominal bore galvanised steel scoure tube with fittings 25mm nominal bore galvanised mild steel over flow tube with fitting & mosquito proof coupling of approved municipal design 15mm nominal bore ball valve and as per direction of Engineer-in- charge including carriage of materials in all leads and lifts. (a) 1000 liters capacity

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. (a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

JEEVAN KUMAR