Construction of 2 No ACRS at Girls High School Hajin.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, in all kinds of soil

Providing and laying Stone solling Hand packed including compacting, watering including all carriages of material complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level (1:4:8) (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incl all carriages 20mm nominal size) Crushed. (All Works up to Plinth level) raft

Providing/laying in position specified grade excluding the cost of centering & shuttering . (M-15 Mix) 1:2:4 (1 Cement: 2 Coarse Sand: 4 graded stone aggregate 20mm nominal size- crushed.)

Centering and shuttering including strutting propping etc. removal of form work in Raft,foundation and plinth (All works upto Plinth level)

Filling available excaveted earth in trunchs , plinth sides of foundation in layers not exceding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in: 1:6 (1 cement and 6 coarse Sand ) in superstructure above plinth level upto first floor level

Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported Kd Wood.

Providing and fixing 32 x5mm flat iron hold fast including fixing of frames with nuts and bolts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, Coloumns, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).incl all carriages Crushed Aggrigrates.

Providing and fixing 20--25mm dia PVC conduite pipes incl. juctions , fan boxes , light boxes etc all complete job

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting propping etc. removal of form work in in lintel bands, roof bands etc (Above plinth level)

Structural steel work welded in built up sections and frame work including cutting, hoisting fixing in position all complete in angles / flats / tubes including MS sheet for chejja,soffits and eveas boarding complete job etc.

Providing corrugated coloured G.S sheet roofing fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers fille with white lead and including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete(upto a pitch of 60 degrees),excluding the cost of purlins,rafters and trusses.0.50mm thick

Providing and Fixing of ridges hips / valleys 60cm vide of colour G.I sheets including cost screws/washers all complete job.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Finishing walls with waterproof cement paint of approved brand and manufacture of required shade to give an even shade on new works all complete job.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing glazed shutters for doors, windows and clerestory windowsincluding ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and Fixing of Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type for door shutters

Applying Priming coat with ready mixed colour primer of approved brand and manufacture on wood work.

Painting with synthetic enamel paint to give an even shade two or more coates of approved brand and manufacture on wood. And steel

Providing and fixing of hardware items of ISI Marked of standard quality and make.; Handles 150mm

Handles 100mm

Concealed Locks 200mm

T Bolts 150mm

T Bolts 100mm

Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire,6 amp one way swittch6 amp S pole MCB,10 amp DP MCB,2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights.including cost of channelsas per requirement.One point controlled by one 6 amp switch.( upto 10 meters)including Placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC Work.incl cost of service line

Heating point (one heatting point includes wiring of lighting point in 2.5 sq.mm PVC insulated copper wire and 4.00 sq.mm PVC insulated multistrand copper wire,16 amp one way swittch,10 amp S pole MCB,2 way DB MCB and hylem sheet.including Placing and fixing in position deep junction of cast iron with network Conduit pipes with necessary fittings in RCC Work.

Providing and fixing one fan point includes wiring for lighting points in 1.5sqmm pvc insulated copper wire and 2.5sqmm pvc in multi -strant copper wire 1200mm ceilling fan electronic fan dimmer.6Amp s pole MCB-10AMP DP MCB 2 Way DB for housing MCB or lightting circuits and hylem sheet.including Placing and fixing in position Fan clamp boxes with MS Fan clamps connected with network Conduit pipes with necessary fittings in RCC Work

Grilling in Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and laying Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments. size of tile 600x600mm etc. complete

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing 18mm thick etc all complete

providing /F Heavy duty glass panes 3.5 mm thick )instead of ordinary glass panes in doors windows and clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured)incl cost of beading nails complete

Making plinth protection 50mm thick of cement concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size ) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand incl. finshing the top smooth and curring all complete

Carriage of material by Mechenical transport form source to site : Cemant Avg 2km

Aggregate -Avg 20km

Sand -Avg 5km

Bricks -Avg 50km