Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.5 L+₹2.1 L (6.12%)Rejected-Finance | L2 | Rejected-Finance Rejected due to L2 | |
| 3 | L3₹36.9 L+₹2.5 L (7.38%)Rejected-Finance | L3 | Rejected-Finance Rejected due to L3 | |
| 4 | L4₹37.6 L+₹3.2 L (9.40%)Rejected-Finance 5 508 509 VRAJ VALENCIA SCIENCE CITY ROAD S G HIGHWAY SOLA AHMEDABAD GUJARAT 390060 | AHMEDABAD | AHMEDABAD | GUJARAT | 390060 | L4 | Rejected-Finance Rejected due to L4 | |
| 5 | L5₹38.3 L+₹3.9 L (11.5%)Rejected-Finance | L5 | Rejected-Finance Rejected due to L5 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
23 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) NO.2 JODHPUR
GE (ARMY) NO.2 JODHPUR Multan Lines, Army Area Jodhpur Jodhpur -342010
REPAIR TO JOINERY FOR OTM ACCN UNDER GE (ARMY) NO.2 JODHPUR
2023_MES_598167_1
8800/23-24/16/02/E8
Open Tender
Civil Works
Item Rate
270 days
GE (ARMY) NO.2 JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (Army) No 2
₹70,000
Yes
17 Jul 2023
25 May 2023
26 Jun 2023
25 May 2023
23 Jun 2023
9 Jun 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.00 sqm each and removing from site or to store, complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site or to store, complete all as specified and as directed.
Taking down shutters any description exceeding 1.00 sqm but not exceeding 2.00 Sqm each and removing from site or to store, complete all as specified and as directed.
Taking down shutters any description exceeding 1.00 sqm but not exceeding 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting, complete all as specified and as directed.
S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling backs of chowkats with cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate etc, complete all as specified and directed
All as per srl item No 05 above but of size 105x60mm --ditto--.
M&L for cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work , complete all as specified and as directed.
S&F of factory made 35 mm thick plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F of factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated , complete all as specified and as directed.
S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed complete all as specified and as directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.
M&L for fabrication of aluminium powder coated door/ window/ ventilators or partition any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position, complete all as specified and as directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.
S&F of sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane, complete all as specified and as directed.
All as per srl item No 13 above but 4mm thick frosted glass, complete all as specified and as directed.
S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.
Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed, complete all as specified and as directed. Note:- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.
S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F.
S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges , complete all as specified and as directed.
S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws, complete all as specified and as directed.
S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws, complete all as specified and as directed.
S&F of 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts, complete all as specified and as directed.
S&F of alluminium anodised handles 150 mm long fixed to windows, complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed , complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 150 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F of mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding , complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work), complete all as specified and as directed.
S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) , complete all as specified and as directed.
M&L for prelaminated particle board 18/ 19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with wooden beading as required fixed in repairs i.e., including taking down and removal of old unserviceable boarding of any description and in any position, complete all as specified and as directed.
M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and as directed.
S&F of hydraulic hings for kitchen cabin door shutter of mild steel bright finish or elecrogalvanised, fixede with screw etc; , complete all as specified and as directed.
S&F of mild steel butt hinges 100mm long, medium weight cold rolled fixed with steel chowakats etc; , complete all as specified and as directed.
S&F of mild steel single action helical hinges 150-200mm long, suitable for 1000-1250mm wide wooden door fixed with steel chowakats etc;, complete all as specified and as directed.
S&F of ball catches with 8mm dia steel ball and brass body and stiking plate incluing letting and fixed in repairs, complete all as specified and as directed.
S&F of ball bearing single extension drawer slide (runner) 300-450mm clear slide and 25-30mm wide,fixed with screws etc, complete all as specified and as directed.
S&F of alluminium anodised handles 100 mm long fixed to windows, complete all as specified and as directed.
S&F of 50mm dia polished hard wood knobs fixed with screw complete fixed in repairs, complete all as specified and as directed.
S&F of powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; , complete all as specified and as directed.
Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed
M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.
M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.
Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 7 - 8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.18 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
Dismantling boarding of any description fixed in any position with nails, complete all as specified.
S&F in repair PVC hollow wall lining interlocking type 5-7mm thick plain/ coloured, fitted into the wall with PVC rawal plugs and steel screws including fillets on joints as per manufacturers instruction complete all as specified and directed by Engineer in charge. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)
S&F in repair PVC hollow false ceiling interlocking type 5-7mm thick plain/ coloured, fitted with MS hollow grid (light weight) section 25mmx25mmx1mm thick including fillets on joints, with hanging arrangements and including maintain levels with adjustable clips, complete all as specified complete all as specified and directed by Engineer in charge. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)
S&F in repair Gypsum board 6-8mm thick in ceilling fixed with screw as per manufacturer's instructions, plain/ colour fixed with steel snap grid (powder coated bottom side) with 'T' and 'L' (25mmx30mmx1.00mm thick) section of size 600mm x 600mm placed in ceiling 'L' section fixed to wall with PVC rawal plugs and steel screws @ 600mm centre to center, including provided 5.0 mm dia galvanised bars/ wire suspended @ 1.80 mtr centre to center both sides proper hanging arrangements and maintain levels with adjustable clips, complete all as specified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing).
S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for door shutter 1000mm to 1200mm vide and weight between 8.0 kg and fixed complete all as specified and as directed.
S&F in repair for Door closer Aluminium (Die cast) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 1000mm to 1200mm in width and of weight between 61 to 80 kg and fixed complete.
L AND J CONSTRUCTION CO.
naveen enterprises
M/S gayatri construction company
M/S Dharam Chand Lal Chand Jain
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .