Panchayat Ghar

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

1 Excavation for foundation upto 1.5 m depth including 156.00 Cmt. 212.53

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1- Cement : 48.00 Cmt. 2769.70

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

3 Brick work using common burnt clay building bricks 90.00 Cmt. 4214.33

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement

: 6 -fine sand)(B) Conventional

4 Providing and laying ordinary cement concrete M-150 19.50 cmt. 4840.69

using B.T. stone aggregate and curing etc. complete,

including the cost of formwork, but excluding the cost of

reinforcement for R.C.C. work in wall cap /copping up to

5 Filling available excavated earth (excluding rock) in 108.90 Cmt. 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

7 Filling in plinth with sand under floors including 41.70 Cmt. 481.80

watering ramming, consolidating and dressing

8 Providing and laying Ordinary cement concrete M-200 2.25 Cmt. 5565.59

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in foundation footings, base of columns

and mass concrete.

9 Providing and laying Ordinary cement concrete M-200 1.20 Cmt. 6139.10

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Plinth BEAMS

BOQ Page No.1

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

10 Providing and laying cement concrete M-200 using B.T. 0.90 Cmt. 12546.97

stone aggregate and curing etc. complete, including the

cost of formwork, but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS: (i)

Having cross-sectional area 0.05 to 0.08 sq.mt

11 Providing and laying cement concrete M-200 using B.T. 5.70 Cmt. 8805.26

stone aggregate and curing etc. complete, including the

cost of formwork, but excluding the cost of

reinforcement for R.C.C. work in BEAM : (i) Having cross-

sectional area 0.05 to 0.08 Sq.M

12 Brick work using common burnt clay building bricks 168.60 Cmt. 4496.05

having crushing strength not less than 35 kg./Sq.Cm.in

superstructer above floor two level in Cement Mortar

1:6 (1- Cement : 6 - fine sand) (B) Conventional

13 Providing and laying Ordinary cement concrete M-200 4.80 Cmt. 10430.85

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Lintel

14 Providing and laying cement concrete M-200 for 10.50 Cmt. 6857.08

reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1-cement,

Fine sand) to give a smooth and even surface centering

and formwork and curing complete excluding cost of

reinforcement

15 Providing and laying Ordinary cement concrete M-200 52.80 Cmt. 6515.66

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Ground Floor / Top level SLAB

16 Providing TMT Bar FE 550D reinforcement for R.C.C. 7590.00 Kg. 95.00

work including bending, binding and placing in position

complete upto floor two level

17 Providing and fixing double door shutter having colour 29.70 Smt. 3797.01

anodized aluminium section-19552 {Section 63.50 x

mm x 2.50 mm thick having weight 1.1 Kg./M.T. } for

door frame, hollow portion of door frame shall be filled

with non teakwood wood for durable grip, with factory

made 38mm thick flush door both side 1mm thick pre

laminated with 6 Lever Mortice lock {Godrej or

Equivalent), SS Aldrop, SS Handle size 30Cm Long,

Tower Bolt size 15 cm etc. as per detail colour & pattern

Apporoved by this office including necessary anodized

alluminum fixtures and fastenings.

BOQ Page No.2

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

18 Providing and fixing window having extruded 62.70 Smt. 1583.96

aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm (of Jindal Section no:2459

@ wt.of 0.738 Kg/mt), horizontal Three track member

size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm (of

Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

19 Providing and fixing FRP frame size 100x50 mm and 18.00 Smt. 2377.77

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter

is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures

& fastenings & fastener sleeve.

20 Providing and fixing 18 mm thick mirror polished 156.00 Sqm 2201.80

Granite stone of machine cut & full round edge and

polished of approved quality in cladding on sill and

around the Doors / windows / ventilation with 20 mm

thick cement plaster 1:3 and jointed with white /

matching pigment cement slurry & adhesive, including

polishing & moulding of exposed edges etc. complete for

all floor level as directed by Engineer-in-charge.

21 Providing and fixing Safety grill / Compound wall, Gate 3060.00 Kg. 152.07

of required pattern ,for window, door etc. using 12 mm

round Bright Bar at required spacing as per design with

Frame of M.S. Flate of size 40x 6 mm and hold fasting

with coach bolts including applying a priming coat of

red lead paint and two coats of oil painting etc. complete

for all floor.

22 Providing 15mm thick cement plaster in single coat on 969.00 Smt. 254.40

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand)including finishing with a floating coat of neat

cement slurry

BOQ Page No.3

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

23 Providing 20mm thick sand faced cement plaster on 1041.00 Smt. 352.44

walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc. complete.

24 Providing 10mm thick cement plaster in single coat on 324.00 Smt. 228.35

ceilings and sofits of stairs upto floor two level for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 including finishing

with a floating coat of neat cement slurry

25 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 307.50 Smt. 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade

26 Providing and laying Ceramic tiles 6mm thick in flooring 22.50 Smt. 997.16

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

27 Providing and laying Ceramic tiles 6mm thick in skrting 118.50 Smt. 1030.57

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry

28 Providing and laying Ordinary cement concrete M.200 1.50 Cmt. 4389.74

and curing complete excluding cost of form work &

Rainforcement of reinforced concret work in with

Vaccum Dewatering system incl. using vaccum

dewatering material Vibrator mechanically floater (A)

Foundation and Plinth ------

29 Providing and laying white glazed tiles 6mm thick in 267.00 Smt. 985.47

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

BOQ Page No.4

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

30 Providing and laying water proofing treatment on 175.50 Smt. 1043.10

terrace with broken China mosaic tiles flooring over

average 40 mm C.C. 1:2:4 bedding for maintaining slope

for plain and curve surface & 12 mm to 20 mm of broken

piece of ceramic / glazed tiles (one for more colour as

directed) to be laid over cement mortar bedding of C. M.

1:3 (1 cement : 3 sand) contain one KG of water proofing

materials per bag of OPC at plain or / and slops and to be

tempered to bring mortar ceramic up to surface with

using white cement and colour pigment, including

rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any patterns or

design as per drawing and cleaning by using oxalic acid

etc. complete.

31 Applying two coats of Birla or Asian acrylic lapy ( putty) 581.40 Smt. 40.59

& two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth.

32 Wall painting (two coats) with plastic emulsion paint of 649.20 Smt. 82.85

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

33 Wall painting (two coats) with plastic emulsion paint of 321.90 Smt. 88.38

approved brand and manufacture on ceiling and sloping

roofs to give an even shade including thoroughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

34 Finishing wall with weather proof exterior emulsion 1107.00 Smt. 120.26

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

BOQ Page No.5

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

35 Providing and fixing wash down water closet European 6.00 No. 2854.99

/ Anglo Indian type W.C. pan with integral “P” or “S” trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (A) Vitreous china

pattern - I (i) in white colour including P & F 100 mm

size “P” or “S” trap for water closet squatting pan

including jointing the trap with the pan & soil in cement

mortar 1:1 (1 cement : 1 coarse sand) including fixing

G.I. inlet connection for flush pipe with W.C. pan.

including Jet Sprey, fixing plastic seat & cover for wash

down water closet with C.P. brass hinges and rubber

buffers. including P&F PVC Flush tank of approved

brand. Cera / equivalent - fitting "Ess Ess" / equivalent.

36 Providing and fixing wash basin with single hole for 9.00 No. 2187.86

pillar tap with C.I. Or M.S. brackers painted white

including cutting holes and making good the same

vitreous china flat back wash basin 550 mm x 400 mm

size in white colour including 32 mm diac.p.brass

couplin 32 mm dia. . M.I. fisher union providing and

fixing pillar tap capstan head screw down high pressure

with screw shanks and back nut 15 mm dia. brass screw

down stop tap 15 mm dia. etc. complete

37 Providing and fixing Urinal or approved quality 6.00 No 1074.86

including conecting the Urinal with waste pipe , tap etc.

complete.(A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

38 Providing and fixing screw down bib taps of following 21.00 No 186.83

size.(B) Brass chromium plated screws down Bib

Tap.(i) 15mm dia.

39 Providing and fixing screw down bib taps of following 12.00 No 263.77

size.(B) Brass chromium plated screws down Bib Tap.

(ii) 25mm dia.

40 Providing and fixing PVC SWR Nahni trap IS 14735 for 12.00 No 586.27

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

41 Providing and fixing S.W. gully trap with C.I. grating 9.00 No 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

42 Providing and fixing C.P. brass towel rail comlete with 9.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

BOQ Page No.6

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

43 Providing and fixing 600mm x 450mm bevelled edge 9.00 No 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

44 Providing and Fixing PVC Spigot and Socket Soil waste 39.00 Rmt. 280.23

and Ventilating Pipe of the following nominal size

45 Providing and Fixing P.V.C. Spigot and Socket Soil waste 159.00 Rmt. 339.05

and Ventilating Pipe of the following nominal size

46 Constructing brick masonry chamber for underground 6.00 No 2932.93

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

47 Supplying & fixing PVC water tank such as Sintex 3000.00 Litre 3.95

including delievery at site, supply and fixing of inlet,

outlet, air vent overflow, drainage sleves of the specified

size, with necessary neo-prene gasket/packing/washers,

GI washer & check nuts etc. complete as directed on

terrsce, loft in bathrooms etc in any height. The rate

shall include for fixing additional accessories supplied

by the supplier accessories. The necessary pedestal /

supporting structures shall be measured relavant items

48 Providing and fixing M.S. fan clamps type 1 of 16 mm. 18.00 No. 132.29

dia M.S. bar bent to shape with hooked ends to R.C.C.

slabs during laying including painting the exposed

portion of the loops all as per standard design complete.

49 Providing laying and jointing in true line and level 123.00 Rmt. 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

BOQ Page No.7

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

50 Providing laying and jointing in true line and level 120.00 Rmt. 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

51 Providing Sock well of inside Dimension 3.00 mt. Deep 3.00 No. 43965.30

& 2.00 mt. Dia. Incl. Excavation, honey comb masonary

work in C.M. 1:6 incl. Covering the top with slab and

providing mainhole cover incl. Providing vatas and

curing etc. complete..

52 Constg Septic tank Including Excavation,B.B.C.C. 1:5:10, 3.00 No. 24632.89

with brick masonarry wall in C;M 1:6 finished with

Cement plaster in C;M; 1:3 incl. partition with half brick

masonary. Etc complete.

53 Providing and fixing Number plate of Marble plate stone 3.00 No 306.14

of required size set in C.M. 1:4 including finishing and

engeaving letters etc. completes.

54 Point wiring for Light / Fan / Bell / Primary Point with 102.00 Point. 279.77

2-1.5 Sq.mm & earth wire of 1.5 Sq.mm (green) both are

of ISI marked 1.1 kv grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall /ceiling, complete

with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on Metal / PVC Box

covered with 3 mm thick PC (Polycarbonate) / Acrylic

sheet with necessary Lamp holder / ceiling rose / H.D.

Connector as directed. (c) with oval conduit /pvc casing

capping double lock type

55 Point wiring for independent PLUG with following size 42.00 Point. 270.68

mains earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in /flushed on wall/ceiling , complete with ISI

marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) / Acrylic

sheet. (c) with oval conduit /pvc casing capping double

56 Mains with ISI marked electrolyte stranded copper 540.00 Mtr. 63.63

conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HFFR)

conforms to IS-694, erected in existing pipe with 1.5sq.

mm copper conductor of same specifications for earth

continuity of following size. [i] 3 wire 1.5 sq.mm

BOQ Page No.8

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

57 Supplying & erecting earth pit of minimum bore 3.00 No's 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound

- 1 Nos Bag of 15 Kg.

58 Providing & Erecting following Shockproof tissino type 6.00 No's 30.30

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (1)

One no Single pole 6 A Switch / Bell push

59 Providing & Erecting approved make following size of 90.00 Mtr. 37.37

TV Co-axial flexible cable comprising inner conductor of

solid bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation. b).RG-6

60 Providing & Erecting following Shockproof tissino type 27.00 No's 45.45

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (3)

One no Single pole 16 A Switch

61 Supplying and erecting LED indoor fittings with LEDs of 30.00 No's 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt LED, LED driver efficiency >

85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

ranges shown.) (A) Tube Light with integral driver (iv)

22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

62 Providing & Erecting following Shockproof tissino type 18.00 No's 209.07

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (14)

Electronic Hum free EME Socket Type Steps Fan

BOQ Page No.9

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

63 Providing & erecting Switch board for Computer or 12.00 No's 318.15

electric apparatus consisting of following items in single

board erected on PVC / Metal board with 3 mm thick

PC (Polycarbonate) / Acrylic sheet erected as directed1

no. 6A/16A universal plug-switch combined. , 4 nos. 6A

Switch & 4 nos. 6A 5 pin Plug

64 Providing & erecting 240 V MCB double pole switch for 9.00 No's 330.27

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp. Cat.III

65 Supplying and erecting led lamps with following wattage 42.00 No's 258.56

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (iv) 16 to 20 watts

66 Providing and erecting Sheet Steel powder coated MCB 12.00 No's 702.96

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming

to IS 13032 and BS 5486-1986 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of

same company of MCB to be used) (E) Single phase

way single door

67 Providing and erecting open well type horizontal mono 3.00 No. 9613.18

block pump set with cast iron body having following

specification (C) 1.00 H.P. single phase open well motor

pump set suitable for 145 LPM discharge @ 25 mtr.

head, suitable for 32 mm dia. delivery pipe with control

panel and 10 mtr. long 3 x 1.5 sq.mm submersible flat

copper cable Cat. II.

BOQ Page No.10

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

68 Providing and erecting Approved make Ceiling fan with 18.00 No's 1596.81

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm sweep complete, canopy and

cms down rod erected on existing hook or clamp with

24/0.2, 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

TOTAL =

I / We am / are willing to carry out the work at ________________________________ % above / below

percent (should be written in figure and words) of the estimated mentioned above. Amount of my / our

tender works out as under

Estimated amount put to Estimated amount put to

Tender Rs. __________________ Tender Rs. __________________

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

Net Rs. _______________________________ Total Rs. _________________________

In words ______________________________ In words ________________________

(* Please strike out whichever is not applicable)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or

as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold

good for work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH /

102008 / 61 / C, Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain

any contractor representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division

PETLAD ANAND.

BOQ Page No.11