PROVISION OF CERTAIN WORK SERVICES IN TECHNICAL AREA AT AFS BAREILLY UNDER GE (AF) BAREILLY

B&R PORTION: Dimantaling of boarding of any description and in any position fixed with nails / screws complete all as specified.

S&F for 18 mm thick HDHMR board exterior grade, including 1 mm thick acrylic high gloss sheet over HDHMR board anti-fungal, moisture resistance, anti borer etc as per IS-14587 for frame and shutter of kitchen cabinet/ cupboard including fixed with nuts, screws , washers, nails, supporting bracket etc and all other connecting accessories as required complete all as specified and directed by Engineer-in-charge. Make:- Action Tessa/Greenply/Century

S&F for 18 mm thick HDHMR board exterior grade, both side lamination with any colour, anti-fungal, moisture resistance, anti borer etc as per IS-14587 for frame of kitchen cabinet, cupboard shelves etc fixing with same matching colour lipping/ beading including fixed with nuts, screws , washers, nails, supporting bracket and all other connecting acessories as required complete all as specified and directed by Engineer-in-charge. Make:- Action Tessa/Greenply/Century

S&F for 12 mm thick HDHMR board exterior grade, both side lamination with any colour, anti-fungal, moisture resistance, anti borer etc as per IS-14587 for frame of kitchen cabinet, cupboard shelves etc fixing with same matching colour lipping/ beading including fixed with nuts, screws , washers, nails, supporting bracket and all other connecting acessories as required complete all as specified and directed by Engineer-in-charge. Make:- Action Tessa/Greenply/Century

S&F for powder coated stainless steel grade-304 sensys intergrated soft close hinges having size 103 mm x 64 mm finished with nickel / silver complete all as specified and directed by Engr-in-charge.

S&F for aluminium G-profile cabinet / drawer handle in shutter of approved make and shape complete all as specified.

Supply, fabrication and fixing for factory made modular kitchen with cabinet/ shelves & wardrobe / cupboard made out of HDHMR board exterior grade including 1 mm thick acrylic high gloss sheet over HDHMR board, anti-fungal, moisture resistance, anti borer etc as per IS-14587 for frame and shutter and external walls, 18 mm HDHMR board both side lamination of any colour for all side of carcase (except back side) and 12 mm thick HDHMR board for back side of carcase for kitchen cabinet/ cupboard shelves fixing with matching 1mm lipping/ beading etc comprising the following items:- (a) All type of basket must be having Innotech drawers system with organiser having powder coated stainless steel (grade SS-304) of standard sizes as per approved make to be provided fit as per available existing space. i.e. Plain basket, Plate Basket, Cup & Saucer Basket, Glass Basket, Cutlery Basket, Cylinder cabinet, Bottle pull out basket (Two shelves), below sink cabinet etc on requirment bases complete all as specified and directed. the following to be adhered :- (i) Atleast one modular kitchen cabinet corner plain shelve unit of standard size as per make/ site requirment to be provided with minimum one horizontal partition. (ii) One modular kitchen cabinet unit below sink to be provided including two square shape dust bin(grade SS-304) with 6 to 8 liter capacity each with one grey lid and one green lid along with waste bin holder. (iii) Adequate two / three Innotech drawer system unit alongwith all acessories with load capacity upto minimum 30 kg to be provided. (b) Hettich Innotech full extension soft closing channels/ runners to be provoided with load capacity minimum 30 kg. (c) Powder coated stainless steel SS-304 hettich sensys intergrated soft close hinges having size 103 mm x 64 mm finish of nickel/silver complete. (d) All shutters or drawer facia of this item to be provided with 'G' type SS profile handle, matt finish (approved quality) complete all as specified. (e) The carcase of all floor units will be supported by 100 mm height vertical adjustable legs (approved make) which will be covered with PVC skirting (approved make) in brushed aluminium finish attached by hardware of skirting. (f) All exposed edges made with 2 mm thick PVC (approved make) edge banding. (g) The quoted rate deemed to be included for all provisions as specified above including required any item to make modular kitchen completely functional, Colour/shade and pattern shall be approved by GE. Nothing extra shall be paid due to above provisions. (NOTE:- Only front facia (Length X Height) of cabinet area below kitchen platform (L / partial U shape kitchen) will be consider for measurement purpose of this item).

Dismantaling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris from site to outside MoD land.

S&F for joint free non skid ceramic coloured tile first quality 7 to 8 mm thick (Square/rectangular) polished and area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile including 15 mm thick screed bedding layer in cement mortar (1:6) complete all as specified.

M&L for providing 25 mm thick cement concrete 1:2:4 mix, type B-O using 12.5 mm gradded stone aggregate as in floors for levelling concrete complete all as specified.

M&L for joint free glazed ceramic coloured tile first quality of size 350 mm x 250 mm x7 mm /450 mm x 350 mm x7 mm thickness on vertical surface such as wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the tile over 10 mm rendering in cement mortar 1:4 complete all as specified.

Taking down cement plaster or cement lime plaster on brick/ stone or concrete surface including racking out joints, hacking for keys, scrubbing down with water etc including removal of debris from site to outside MoD land.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surface of wall including finished surface even and smooth without using extra cement all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified.

M&L for preparation of old plastered surfaces of wall/ ceiling and applying two coats of oil bound distemper all as specified.

Supply and laying for LT cable (heavy duty) XLPE cable 70 Sqmm 3.5 core, 1100 volt, ISI marked insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor including commissioning and testing in trenches / ducts, passing through pipe / fixing on poles all as specified and directed.

M&L for providing plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer in soil all as specified.

Removing surplus excavated material (Soil) to a distance exceeding 1.50 Kilometre but not exceeding 5.00 Kilometre and depositing where directed at a level not exc. 1.50 m above the starting point all as specified.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 all as specified.

M&L for providing 150 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) all as specified.

M&L for providing 100 mm thick cement concrete 1:2:4, type B-1 (using 20 mm grade stone aggregate) as in floor including finishing top surface even and smooth without using extra cement all as specified.

M&L for 75 mm thick cement concrete 1:3:6 mix, type C-1 (using 20 mm graded stone aggregate ) as in plinth protection laid in bay not exc 3.00 sqm each including finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces including finishing surface fair and even mixed with liquid WPC as per manufacturer's instruction complete (Note :- WPC will be measured and paid separately).

M&L for 15 mm thick rendering in cement mortar 1:6 in patch on fair face of brick work or concrete surfaces including finishing surface even and smooth without using extra cement.

Supply only liquid water proofing compound.

M&L for preparation of newly plastered / previously untreated surfaces of walls and finishing wall with acrylic smooth exterior paint (first quality) of required shade new work (two or more coats in camouflage pattern as approved by Engineer-in-Charge applied @ 1.67 Ltr per 10 Sqm over and including priming coat of exterior primer applied @ 2.20 Ltr per 10 Sqm complete all as specified.

M&L for preparation of surface of wall and applying wall care putty of 1 mm avg thickness over plastered surface to prepare the surface even and smooth all as specified.

M&L for two or more coats of distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gram /liter of approved manufacturer of required shade and colour over a coat of primer on newly plastered surface all as specified.

S&F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium for doors shutters of aluminium section weighing 0.55 kg/mtr including necessary joining cleats, glazing clips, ruber neoprene packing, handles (02 Nos) in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised of approved colour, sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill and mosquito proofing net including comprising as detailed below :- (i) Frame section 91.85 mm X 31.75 mm X 1.30 mm, section No. 8758 of Jindal or its equivalent for top and sides rails and 91.85 mm X31.75 mm X1.20 mm for bottom rail section No. 8687 of Jindal or its equivalent. (ii) Shutter for top, bottom and side rails 40 mm X 18 mm X 1.50 mm, section No. 8820 of Jindal or its equivalent. (iii) Glass 5 thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearing section No. 4407 and necessary handles, tower bolt etc. as directed. (iv) Stainless steel wire mesh 0.36 mm nominal dia fixed with aluminium frame. (v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vi) Locking arrangement and providing Namda rope to make the frame air tight.

S&F for 5.50 mm thick sheet glass (tinted/ reflective type) in square complete .

S&F for 12mm thick prelaminated particle board, grade-2 quality, interior grade, decorative type with decorative face veneer with on both faces fixed at site as per specification complete all as specified.

M&L for providing reinforced cement concrete 1:1.5:3 (Nominal Mix) type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chhajjas, water troughs, mangers, shelves and similar articles with plain faces and the like all as specified.

S&F for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

S&F for mild steel TMT bar 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for formwork to sides and soffits of floor or roof roof slab, manhole cover slab etc in rough finished surface of concrete complete all as specified.

M&L for providing 18 to 20 mm thick 'Z' black granite stone slab (table rubbed and polished) bull nosed as on shelves of cooking plateform, WHB, pillars, cill etc over and including 20 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade complete all as specified.

S&F for Neoprene/EPDM rubber gasket beading for aluminium work all as specified.

S&F for Mortice lock, brass 2 lever vertical type, size 65 mm all as specified.

S&F for floor door stoper 150 mm aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified.

S&F for false ceiling at height with fully perforated 12mm thick micro tegula edged or 10 mm thick square edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595X595 mm of approved texture, design and pattterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8825: 1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended inter locking metel T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both side) comprising of main-T runners of size 15X12 mm of length 3000mm,cross-T of size 15X12 of length 1200 mm and secondary intermidate cross-T of size 15X12 mm of length 600 mm to from grid module of size 600X600 mm suspended from ceiling using Galvanized mild steel items( galvanizing @ 80 grams per Sqm) i,e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm Galvanized iron perimeter wall angle of size 24X24X0.40 mm of lenght 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall good screw all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for.

M&L for providing 100 mm thick cement concrete 1:2:4 mix, type B-1 (using 20 mm graded stone aggregate) as in hard standing, floor, pavement etc complete all as specified.

M&L for forming contraction (dummy) joint 65 mm deep x 10mm wide f

M&L for point wiring with 2.5 Sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade of 20 mm dia with all fittings including 2.5 Sqmm single core 1100 volt grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including pressed mild steel sheet (1.0 mm thick) sunken box with 3 mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface all as specified.

M&L for point wiring with 1.5 Sqmm FR-LSH PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 25 mm dia fixed concealed / recessed in wall / ceiling etc including1.5 Sqmm FR-LSH PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volt grade as in earth continuity wire including mild steel sunken pressed steel terminal boxes of suitable size made of sheet 1.6mm thick with 3 mm thick bakelite sheet top cover for One light/ Fan point controlled by one way switch all as specified.

All as per Item No. 48.00 but for one 3 pin socket outlet, 5/6 Amps on independent board all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switch, socket,ceiling rose, holder etc and making good disturbed surfaces of walls, floors, etc all as specified.

S&F for switch piano flush type 5 Amps, single pole one way all as specified

S&F for socket out let 3 pin 5 Amps, flush type all as specified.

S&F for switch piano flush type single pole one way 15 Amps all as specified.

S&F for socket outlet 2 in 1, 6 pin 5/15 Amps, flush type all as specified.

M&L for submain wiring with two single core 4.0 Sqmm PVC insulated FRLS multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit not less than 20 mm dia, medium grade, ISI marked with all conduit fittings & fixing accessories and one single core 4 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified.

S&F in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with one single pole MCB 20 Amp all as specified.

M&L for chase cutting, pinning in making good to facings where required cutting not exc 10 cm girth and making good in cement mortar 1:3 in wall / ceiling / floor for cocealed conduit wiring etc complete.

M&L for shifting of 10 KVA UPS from inside of room to outside the room with connected all accessories complete all as specified and directed. (Note :- Replacement of wires alongwith connected items shall be deemed to be included in quoted rate of this item).

M&L for bricks sub class 'B' for covering to under ground cable laid flat transversally width equal to the lenth of the cable all as specified.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation, cable, poles, stay etc or for manholes, cesspits, shafts, columns etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified.

M&L for dry sand cushioning to underground cables with 8 cm thick before laying of cables and 15 cm thick after laying and stretching of cable all as specified. Note : Only punned thickness i.e. 18 cm shall be measured and paid.

S&F for flush mounting, factory made V TPN DBs-DPX-250 MCCB DB's, IP-43 protection-IK09 with metal door with 250 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 250 MCCB as incomer and 12 Nos. MCB's, SP as outgoing etc including grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified.

S&F for MCCB 200 Amp 4 pole fixed thermal & fixed magnetic of 36 KA breaking capacity 415 Volt all as speecified.

S&F for Industrial socket 3 Pin+N+E , 400 Volt, 50 Hz, 125 Amp complete all as specified.

Supply, installation and testing for Hi wall split unit indoor / outdoor complete with cordless remote control unit and with 5 star convertaible 5 in 1 cooling inverter split AC, copper wound rotary compressor, copper condenser and digital inverter fitted single phase 230 V 50 HZ suitable for CFC free refrigerant of capacity 1.5 TR Make-Blue Star /Hitachi / Carrier / Voltas all as specified and as directed. (NOTE :- Power cable between outdoor to indoor unit, copper piping, stand for out door unit and drain pipe shall be deemed to be quoted rate of this item).

Supply & Installation copper wound automatic boost / back transformer wall mounting digital display for low and high voltage correction equiped with electronic transistored relay suitable for correction on single phase 50 cycles AC supply complete with volt meter and designed for input voltage of 160 volts to 260 volts and out put voltage stablized between 215 volts + 1% of capacity 5 KVA with high low voltage and time leg relay complete all as specified.

S&F for ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 Volt, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE 5 star rating with brushless direct current motor (BLDC) with complete assessories all as specified.