REPAIR TO CERTAIN FENCING AND OTHER MISC WORK AT DEFENCE LAB JODHPUR

Amount

Dismantling of GI barbed wire fencing, any type ccomplete all as specified & directed by Engineer-in-charge.

S& F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified & directed by Engineer-in-charge.

All as item No-02 above for Restraining & resecuring including making good staples for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified & directed by Engineer-in-charge.

Dismantling fencing wire mesh, any type and size complete all as specified & directed by Engineer-in-charge.

Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil,returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed by Engineer in charge.

M&L plain cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed by Engineer-in-charge.

M&L plain cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Kerbs,coping,bed plates,including weathering slightly rounded off, plinth courses, parapet walls etc complete all as specified & directed by Engineer-in-charge.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion from concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

S&F mild steel sections like angle, flat etc in post and struts in fencing including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

Fixing only chain link fencing including line wires round or square, any mesh,size and type to any type of standards,rails, straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge

Fixing only in repairs chain link fencing including line wires round or square, any mesh,size and type to any type of standards,rails, straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge

Supply only chain link MS galvanised fencing, any size or type(size as approved by AGE(I)) complete all as specified and directed by Engineer-in-charge.

Supply only Mild steel round or square bars,in available length Fe-290(Gde-165) for fixing of chain link fencing complete all as specified & directed by Engineer-in-charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified & directed by Engineer-in-charge.

M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Cleaning away all grass ,vegetation, saplings ,shrubs ,brushwood, undergrowth, roots,and trees not exceeding 30 cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed by Engineer in charge.

M&L preparation of old painted surface of kerb stone/concrete surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) in two different colour pattern complete all as specified & directed by Engineer-in-charge.

M&L preparation of old steel surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting , any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

MAA AISHA TRADERS SIWANCHI GATE

SNEH CORPORATION

vinayandsons