REPAIR/REPLACEMENT TO FLOOR, JOINERY, WALLS, TILES, SANITARY/ WATER SUPPLY FITTING AND ALLIED WKS IN ZONE VII UNDER THE AREA OF AGE B/R-I AT GE (W) BAREILLY.

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 125mmx60mmx2mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed

S&F 105mmx60mmx2mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

S&F 2nd class hardwood glazed and Skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed.

M&L for factory made solid panel PVC door flush shutter 30 mm thick (style) consisting of frame made out of one side prelam PVC sheet and other side plain pvc sheet. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall with necessary screw /solvent to make PVC Frame as per specification and drawing

M&L for 5mm thick Prelam coloured PVC sheet with required angle, strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site inclusive taking down old wall panneling complete all as specified and directed.

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F steel ventilator with top hang shutters with pressed steel frames including hinges, steel peg stay in repairs

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F in repair 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S & F in repair 300 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S&F in repair 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S & F 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S & F in repairs 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S & F mild steel 300 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete all as specified and directed.

S & F in repair mild steel 300 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete all as specified and directed.

S & F in repair 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings ofdoor shutter complete all as specified and directed.

S & F in repair Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F in repair Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F Figured glass, 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F Sheet glass 4.80 mm thick, ordinary quality and glazing with rubber gasket in aluminium frame not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed.

M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed.

S&F Glass dividing strips 3mm thick 38mm wide complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for RCC

M&L for Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as as in chajjas and like all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles including necessary formwk with plain faces and set in cement mortar 1:4 all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Cutting down existing tree any girth on roof/wall of bldgs, grubbing roots including necessary cutting and filling holes with cement mortar 1:4 or PCC 1:2:4 type B-1 making good to disturbed portion of brick work and cleaning site, complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar including demolition of old brick work complete all specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement including taking down old plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed. (Water proofing compound wiil be measured and paid in respective Schedule.)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement including taking down plaster from ceiling and scrubbing down with water etc complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of walls and applying one coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old painted ceiling surfaces and applying a coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L for preparation of new plastered walls surfaces and applying two coats of Cement based paint paint over a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for preparing old plastered surfaces and applying one coats of cement base paint on surfaces of walls complete all as specified and directed.

M&L for preparing new plastered surfaces and applying Two coats of Oil bond distemper over 2 mm thick wall care putty on surfaces of walls complete all as specified and directed.

M&L for preparing old plastered surfaces and applying one coats of Oil bond distemper on surfaces of walls complete all as specified and directed.

M&L for preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc

M & L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone 20-25 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing, rounding of edge and polishing all as specified and directed.

M&L for 15-18mm thick Marble (Green or coloured) stone for floor, steps, jambs, pillars, window cills, cooking platform and like 13-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing androunding of edgeover and including 15mm thick screed in CM 1:6 complete all as specified and directed

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of floor or wall tiling and 15mm thick screed bed in cm-1:6 all as spd or as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 (400x400) sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 including dismantling existing tiles complete all as specified and directed.

M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300x200 mm jointed and pointed with coloured cement to match including 10 mm thick rendering of cement mortar 1:4 and dismantling of floor/wall tile including cement mortar bedding complete all as specified or as directed.

M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 450x300 mm jointed and pointed with coloured cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of old floor/wall tile including cement mortar bedding complete all as specified or as directed.

M&L for vitrified coloured doubled charge tiles 7 to 8 mm thick (square/ rectangular) ( 1200mm x 600mm ) on floor surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed with cement mortat 1:6 including dismantling existing tiles complete all as specified and directed.

M&L for vitrified coloured doubled charge tiles 7 to 8 mm thick (square/ rectangular) ( 1200mm x 600mm ) on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering with cement mortat 1:4 including dismantling existing tiles complete all as specified and directed.

M&L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15 mm thick screed bed in cm 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge.

S & F rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade bedded over 25 mm thick sand cushion including filling the joint with sand including dismantling existing tiles/paver block complete all as specified and directed.

S & F rubber moulded coloured Chequered cement concrete tiles 25cm x 25 cm x 22 mm thick, bedded over and including screed bed 20mm thick in CM 1:6 set and jointed in neat cement slurry and pointed with white cement and pigment including dismantling existing tiles complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from tanks capacity exc 250 ltr but n exc 500 ltr and from mouths of circulating pipes etc. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from tanks capacity exc 500 ltr but n exc 1000 ltr and from mouths of circulating pipes etc. complete all as specified and directed.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed.

S & F 1000 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15 mm GI old steel tubing and connections in new or old position complete all as specified and directed.

Refixing 20 mm GI old steel tubing and connections in new or old position complete all as specified and directed.

S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed.

S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair CP wall mixer with connction for shower arrangement complete all as spd and directed Make -Jaguar, Cera, Hindware

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed. Make -Jaguar, Cera, Hindware

S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed Make -Jaguar, Cera, Hindware

S&F in repairs to CP Brass Health faucet with 1 mtr tube with wall hook complete all as spd and directed Make -Jaguar, Cera, Hindware

S&F in repair to toilet paper holder CP Brass fancy type Make -Jaguar, Cera, Hindware

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F for in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holders

S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed.

S&F in repairs Ball valves 25mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed.

S&F in repairs Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed.

S&F in repairs Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms)

S & F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

S & F in repairs stainless steel plate rack of over all size 31"x30"x10" made with 0.63 mm stailless steel thick sheet complete all as specified and directed. Make:- Blue star, Silvershine, Nirali

S & F in repairs Vitreous China wash basin with pedestal white , flat back, size 580x450 including , waste coupling brass,waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.

S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed.

S & F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630x450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed.

S&F in repair vitreous china wash down water closet single piece-WC (cascade pattern ) with UF seat cover, hinge, fixing accessories, cistern fittings, size 655x665x760, S trap-300 white, including connection to drain pipe etc complete all as specified and directed. Jaquar CAT No LYS-WHT-38851S, CERA-S1013178, Parryware-C847K

S & F in repairs Seat cover for EWC with brackets for fixing in seat complete all as specified and directed.

S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMTnuts of length 450mm

S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed.

S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)

Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge.

S & F in repairs Aluminium body(die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. in repairs complete all as specified and directed..

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed..

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook including dismantling of old asbestos cement (corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.

M&L for 6mm thick Asbestos cement two piece adjustable plain wing fixed with J or L type or crancked hook bolts including dismantling of old sheets complete all as specified and directed.

S&F plain, thick galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing( length and girth as fixed) with grade of zinc coating 275 and sheet 0.8mm thick including dismantling of old sheet complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

Supply and fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified.

S&F in repairs anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed, comprising of (aluminium anodised section and aluminium anodised fitting as following :- a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thick b) Lock rail of section- 83.50 x 44.45 x 1.70 mm thick c) Stiles of section- 85 X 44.45mm X 1.40mm thick including 2 handles, hinges etc

S&F in repairs aluminium anodised window/ventilator with fixed aluminium frame of size 63.50 x 38.10 x 1.41 mm thick fixed in vertical position with aluminium vertical members and 4.8 mm thick tinted glass including rubber beading and aluminium glazing clips complete all as specified.

Supply and fix in repair 140mm long Floor door stopper made of double Aluminium rod and hard rubber shoe fixed with steel screws complete all as specified and directed.

S&F in repairs pvc waste pipe 32mm dia 1mtr long complete all as specified and directed

S&F in repair 20 mm dia MS Fancy type drappery curtain Rod with bracket and lattu and other connceted accessories etc complete all as specified and directed

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repair PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.

S&F in repair stainless steel Grating doom 125 mm dia joint with white cement complete all as specified and as directed.

Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)

Supply only liquid waterproofing compound all as specified. Make : Dr. Fixit

M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete

S&F in repairs 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

novell engineers

multiple alliance enterprises

M/S Shree Sai Builders

A K builders

M/S Alam Construction Co

REHAN CONSTRUCTION

hardeep singh enterprises

M/S YASHCON CONSTRUCTIONS

RIYASAT ALI KHAN