15th fc 2024-25 2nd installment untied grant

Engaging Dewatering pump 5 HP (diesel) for Bailing out water from the trenches including hire charges, Crew, oils, conveyance of Machinery to site and other incidental charges etc., complete. As per SoR P44/26 (PH)

Removal of wet Silt and sludge from sullage drain with aid of baskets and vessels and labour charges etc,. Complete. As per SSR P11/40 (PH)

Earthwork in excavation for structures as per drawings and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal up to a lead of 50 mts dressing of sides as per Technical Specifications 305 MORD / 304 MORTH. (RBR-FNDN-1-A)

Carting of waste material with a initial lead up to 3.00 km including loading, unloading charges etc,. Complete. As per SSR P41 (PH)

Collection, supply and Filling with Stone Crusher Dust (Finer than 3mm HBG m/c) in layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges etc., complete for finished item of work. (APSS NO. 309 & 310) (RBR - F NDN - 2)

Plain Cement Concrete (1:4:8) mix using 40mm hard granite machine crushed metal with OPC (Ordinary Portland Cement) including cost and conveyance of all necessary material, labour, curing for 7 days etc., complete. (BLD - CSTN - 2 - 5)

The Centring and scaffolding charges for VCC vertical walls of plane surface including open drains of 600mm size and above. Including centring hire charges and centring labour charges for Both Faces for Wall

Providing Nominal mix (1:2:4) P.C.C grade M-20 concrete using 20 mm nominal size Graded hard stone aggregate with OPC, mechanically mixed, placed and compacted by vibration including curing for 21 days complete as per drawings and technical specifications. RBR-FNDN-4-5

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. BLD-CSTN-2-13

Supplying, fitting and placing HYSD / TMT (Fe-500 / Fe-500D / Fe-550) with ISI Standard Mark bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded BLD-CSTN-2-18 For Walls

Plastering in CM (1:3) Prop, 12mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc. BLD-CSTN-6-1

Supply and placing of M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For Slab

Fixing of Channels Levelling the concrete with Beam vibrator vacuum dewatering power trowelling to finish as per the direction of Engineering Incharge rate inclusive of labour charges all complete for finished item of work. VDF

Supplying, fitting and placing HYSD / TMT (Fe-500 / Fe-500D / Fe-550) with ISI Standard Mark bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded BLD-CSTN-2-18 For Slab