REPAIRS TO FLOORING CEILING ROOFING AND OTHER ALLIED WORKS AT CENTRAL AMENITY BUILDINGS GE OFFICE AGE OFFICE AND BSO YARD AREA UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises.

M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in sub base for leveling course.complete all as specified.

M&L for joint free non-skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.

Ditto above item No 3 but on skirting over 10 mm th rendering in CM 1:4 complete.

M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M&L for vitrified coloured tiles 8 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete

Ditto above item No 7 but on skirting over 10 mm th rendering in CM 1:4 complete.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick etc.,complete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement

Material and labour 75 mm thick plain cement concrete 1:4:8 type C-2 using 40 mm graded stone aggregate as in the sub base of floor complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and as directed.

Taking down Chowkat/frame n.exc 1.5 sq.m including removing to store,complete all as specified.

Taking down Chowkat/frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified.

Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each and removing to store,complete all as specified.

Taking down Shutters of any description exc 2 sq. m each and removing to store ,complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F Glazed and skeleton shutter 35 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified.

S&F plain framed paneled shutter 32 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

S&F Anodised aluminium window and ventilator shutters, (three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S & F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed, complete all as specified

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified

S & F 125 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

S & F in repairs 15 mm bib taps fancy type long shank cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified

S & F in repairs 15 mm dia angle valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified

Supply and fixing in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe complete all as specified and directed by Engineer-in -Charge

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc comple make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.

S&Fixed in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc Make:-Hindware,Cera,Parryware.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

Supply & fixed in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete.

S & F in repairs 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified

S & F in repairs Vitreous China wash basin white with pedastal flat back size 580x450 mm including brackets, complete all as specified

S & F in repairs 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified

Supply & fixed in repair Towel Rail 600 mm long of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete.

Supply and fixed PVC connection 15 mm dia and 45 cm long with 2 Nos brass nuts, fixed in repairs complete.

Dismantling water tanks and removing to site up to 500Ltr capacity.

Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.

Supply & fixed rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 500 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete.

Supply & fixed rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete.

M&L for 15 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, complete all as specified.

Supply and fixed Grating round 140 mm size with waste hole of stainless steel fixed in repairs complete

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

All as per item No. 54 above but bore of pipe 20mm

Supplying and laying15 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 20 mm bore Galvanised mild Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 15mm bore Galvanised mild Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F of sheet glass 3 mm thick ordinary glass with oil putty in square n.exc 0.5 sq.m in each pane.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof covering

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 66 above but fix in valley gutter / ridge,plain/corrugated.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W ( gde E-250)Quality A

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, complete all as specified.

Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Supply & fixed in repair Wall mixer with telephonic type chromium plated, fancy type, 15 mm bore fixed in repairs complete. MAKE : MARC Cat No. MES-1140 or equivalent all as specified and approved by Accepting Officer.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

M&L for preparation old wooden surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surface and aplying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for Preparing new surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coats of creosote oil complete all as specified

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

M & L for 10 mm thick polypan PS 20010 Prelam PVC (Hallow profile ) Sheet used for fixing on wall lining and PVC False Ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

M & L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh Complete all as specified and directed.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Comlete removal of existing treatment and repairing the surface and applying two coad of luster paints as on wall surfaces over a coat of alkali resistant priming paint & putty (make- Birla or JK white ) @ 1.20 kg/Sqm including preparation surface of wall complete all as specified and directed.

M & L for complete removal of existing treatrment and applying two coats of Plastic emulsion paint as on walls over a coat of priming paint and 3 mm wall care putty over complete surfaces, complete all as specified.

S & F in repairs Pulley Operated Cloths Drying system of 7 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Enge-in-charge.

S & F in repairs Pulley Operated Cloths Drying system of 8 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Enge-in-charge.

M/S B.A. GAIKWAD

Shri Sant Cosntruction

H S TAKHI

D J Construction

M/S VR KRNCH

KARPE AND SONS CONSTRUCTION

PREETI ENTERPRISES