CHILDREN PARK

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering - All works upto plinth level. 1:2:4 (1 cement: 2 coarse sand(zone III):4 graded stone concrete 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement - All works upto plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand(zone III):3 graded stone concrete 20mm nominal size)

Reinforced cement concrete work in wall (any thicknes) including attached pillars butteresses, plinth and string courses , fillets, columns, pillars, piers, abutments, posts and struts, etc above plinth level up tp floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size)

Providing tor steel reinforcement of 10mm,12mm & 16mm bars as per approved design and drawing. 10mm fe 500

Providing tor steel reinforcement of 10mm,12mm & 16mm bars as per approved design and drawing. 12, 16mm fe 500

S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering - All works upto plinth level. 1:2:4 (1 cement: 2 coarse sand(zone III):4 graded stone concrete 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement - All works upto plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand(zone III):3 graded stone concrete 20mm nominal size)

Reinforced cement concrete work in wall (any thicknes) including attached pillars butteresses, plinth and string courses , fillets, columns, pillars, piers, abutments, posts and struts, etc above plinth level up tp floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size)

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75Bbrick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing 125mm thick designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Supplying ,fiftting and good quality. Well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W clerestory windows openinig, including wedge over all clams complete including application of coats of wood presevative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length andjointed together at the end by end locks, mounted on specially designedpipe shaft with brackets, side guides and arrangements for inside andoutside locking with push and pull operation complete, including thecost of providing and fixing necessary 27.5 cm long wire springsmanufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thicknessfor rolling shutters.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 500 x 500 mm size

Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. 13.42.1 Two or more coats on new work

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing two coats of painting with ready mix paint over a coat of primer of approved shade and make over new steel surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete

Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings,frames,guard bar , ladder, railings , brackets , gates and similar work.

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Bricks Lead = 1 k+7 P(8km)

Sand lead =8 km

Stone chips lead = 118 km

cement = 3km

steel = 3km

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)

Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately).

Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge.

6' high 20' dia ball fountain with 30 nozzles bronze make with civil works complete

6' high fiber resin sculpture

STATUE SPOT LIGHT UPLIGHTER

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).@ 6KG/M2

MS analog clock outdoor type 1.5m X 1.5m with all machineries as applicable as per direction of E/I

Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification as required. 3.5 core 50sq. mm.

4 core 16sq. mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 25 sq. mm

Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( without charcoal or coke and salt).

Extra for using charcoal and salt for GI/Copper plate earth electrode complete as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply and laying 25mmX5 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ STONE WARE / METAL pipe/ Cable Trays as required. Upto 25 sq. mm

Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade. 2C x 6 sq mm

2C x 10 sq mm

2C x 16 sq mm

2C x 25 sq mm

Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC Medium Class conduit alongwith 1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc as required

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc as required ( but with out charcoal/coke and salt )

Extra for using charcoal and salt for pipe earth electrode complete as required.

Supplying and fixing 50mm dia GI pipe on the pole for cable entry to junction box as required.

Wiring for light/ceiling fan/exhaust fan/call bell point with 2x1.5 sq.mm PVC insulated stranded copper conductor cable alongwith 1 No. 1.5 sq.mm PVC insulated copper conductor cable for earthing in PVC Medium conduit as required. (Point shall be controlled / looped Fromexisting point). Point wiring in PVC conduit, with modular type switch; Group C

S/F Modular type switch socket; 5/6 amp, one way switch

S/F modular boxes, base & cover plate; 1or 2 module (78mm X 78mm X 45mm)

Wiring with 2 x 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC Medium Class conduit alongwith 1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying of USHA 1200 mm sweep ceiling fan with 300/600 mm standard down rod and electrical connection as required etc.

Supplying and fitting tubelights 12 watt (SYSKA B22)

Supplying and fitting syska 12watt led bulb

Supplying and fitting Syska 5watt led bulb

Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch,connection,painting etc.as required.

Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.

S/F, S.P., MCB DB 8 way, Single Door

S/F, 'C' series MCB:- 6/32 amp, Single pole

S/F, SPN RCCB:- 16/25 amps

Dismantling pucca brick work or lime work including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I

Dismantling R.C.C. work or lime work including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

200/150 mm dia Deep borewell : Suppling all materials labours , tools & equipments for drilling 200/150 dia Borewell in bell hammer technology inclusive of molillisation demolillsation of rig air compressor all accessories tools and plants labour etc all complete job including of transportation charges up to site -do- (a) From 0.00 M to 50.00 M below G.L

(b) From 50.00 M to 200.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200mm Nominal size dia.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm Dia.

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Supplying 100mm dia. Submersible pump sets confirming to IS 8034 and motor cvonfirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft ant polypropylene/ norylimpeller. Motor suitable for working on 415 V+10%, 3PH, 50 HZ, AC supply with cable guard, thurst carbon/ fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump ste shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined no return valve shall be provided with pump. 3 m submersible copper conductor cable in single/ double run shall be provided with each pump. 2 HP

Supplying and fitting of standared make starter pannel board with arrangement of all necessory protection ,including all taxes , royalty etc all complete job as per direction of E/I

Supplying ,fitting & fixing & connecting 3 core 4 sqmm flat copper submerssible cable of Finolex / Hevels make including all taxes ,royalty etc all complete job as per direction of E/I

Supplying and laying /lowering of GI pipe of 50 mm dia including of required fittings solvent etc complete job as per direction of E/I

Earth work is excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give 1m av, cover over the socket of pipe with disposal of excavated earth wirthin intial lead and lift as per specification and direction of E/I.

Earth work in back filling the trenches after laying different types and size of pipes with earth removed dufing excavation within intial lead and lift as per specification and direction of E/I. ( For classification of soil item- A&B)

Supplying material and labour and construction inspection chamber all complete as per specification and direction of E/I

Supplying G.I pipe TATA make all complete as per specification and direction of E/I (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Supplying labour and tools for fixing G.I pipe all complete as per specification and direction of E/I (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Providing fixing male ended 15 mm dia brass bib cock of approved quality all complete as per specification and direction of E/I 15 mm dia

Providing and fixing 15 mm size C.P brass pillar cock of approved quality all complete as per specification and direction of E/I (b) C.I body brass spindle

Supplying fitting and fixing G.I fitting of approved quality all complete as per specification and direction of E/I (A) Elbow (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

(B) Tee Plain (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

© Reducing Sockets (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(D) Nipple (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

( E ) Plug (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

(F) Reducing Tee Plain (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(G) Union Socket (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/I (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Supplying fitting and fixing vitreous white glazed ware I.W.C of parry hindustan or any other I.S.S approved all complete as per specification and direction of E/I 580 mm long with 12.5 litres low level PVC cistern

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved all complete as per specification and direction of E/I

Supplying fitting and fixing H.C.I pipe with ear of approved make all complete as per specification and direction of E/I (a) 100 mm dia

(b) 75 mm dia

Supplying fitting and fixing H.C.I pipe fitting of approved make all complete as per specification and direction of E/I (A) H.C.I single junction with door but without ear except socket (a) 100 mm dia

(b)80 mm dia

(B) H.C.I Heat Rest Bend (i) 100 mm dia

(ii) 80 mm dia

( C ) HCI bend with door & ear (i) 100 mm dia

(ii) 80 mm dia

(D)Norton Patent HCL Cowl (i) 100 mm dia

(ii) 80 mm dia

( E ) Floor trap with grattings (i) 100 mm dia

Supplying all tools and labour and cutting of chajja or cronice for laying HCI pipe of approved make all complete as per specification and direction of E/I

Making Halls in walls for laying H.C.I pipe all complete as peer specification and direction of E/I (i) 125 mm dia

(ii) 250 mm dia

Supplying material and labour for painting the exposed H.C.I pipe all complete as per specification and direction of E/I (a) 100 mm dia

(b) 80 mm dia

Supplying fitting and fixing polythene water storage tank of approved quality

Supplying fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware urinal all complete job (a) Flat back or standing corner (600 mm x 350 mm)

Reinforced cement concrete work in wall (any thicknes) including attached pillars butteresses, plinth and string courses , fillets, columns, pillars, piers, abutments, posts and struts, etc above plinth level up tp floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size)

Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l

Providing 12mm cement plaster (1:8) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Multi Seater See Saw

Double Arc Swing

FRP Platform MGR

Spiral Slide (2.1m)

bench with backrest Wooden/ Treated Bamboo/ Bamboo composite planks Fitted in cast iron frame. Painted/ Polished with protective laquer coat

TRAMPOLINE

TRIPLE TWISTER – PGOFT 29 Product Area : 1.9 X 1.9Mtr Safe Play Area : 2.9 x 2.9 Mtr

SIT UP BOARD – PGOFT 47 Product Area : 2.5 X 0.9 Mtr Safe Play Area : 3.5 X 1.9 Mtr

CIRCULAR PULL UP STATION – PGOFT 44 Product Area : 3.5 X 3.0 Mtr Safe Play Area : 4.5 x 4.0 Mtr

LEG PRESS SINGLE – PGOFT 37 Product Area : 1.2 X 0.9 Mtr Safe Play Area : 2.2 x 1.9 Mtr

CHEST PRESS & SHOULDER EXERCISER COMBINATION – PGOFT 22 Product Area : 2.3 X 1.2 Mtr Safe Play Area : 3.3 x 2.2 Mtr

SOLAR LED STREET LIGHT 1) Solar module 12V , 75 watt 2) Battery 12 V , 40 AH 3) LED LUMINARY 9W Installation and transportation also.

Garden light with 3m high pole

Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner. 3 core 2.5 sq mm Per

3 core 10 sq mm

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 meter and upto 8.0 meter

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc. as required. Upto 35 sq. mm

ADD GST @12%

ADD LABOUR CESS @1%

RAJIB KUMAR PAUL