Kerala

AOC

Works

Civil Works - Buildings

Panjal GP 2025-26 Renovation works at Thuvarakkad Nagar Anganwadi in ward 3

Local Self Government Department

Panjal | Thrissur, Kerala

Amount: ₹2.5 LCloses: 6 Oct 2025Closed

Timeline

Published27 Sept 2025
Closed6 Oct 2025
Technical Evaluation27 Oct 2025
Awarded13 Nov 2025

Bids

Item Rate

2 Bids13 Nov 2025

#	Company	Amount	Rank	Status
1	FAHAD A Y 1₹2.1 LAccepted-AOC	₹2.1 L	1	Accepted-AOC Lowest Bidder
2	RAVICHANDRAN M R 2₹2.1 L+₹6,918.94 (3.34%)Rejected-Finance	₹2.1 L+₹6,918.94 (3.34%)	2	Rejected-Finance Highest Bidder

BoQ Comparative

Line Items (12)

Sl No	Description	Qty	Unit	RAVICHANDRAN M R L2	FAHAD A Y L1
1.00Maintenance
1.00	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	96	sqm	143.92 ₹13,816.32	139.3 ₹13,372.8 Lowest
1.00	15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.	432	kg	4.91 ₹2,121.12	4.78 ₹2,064.96 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	320.4	kg	194.9 ₹62,445.96	188.67 ₹60,449.87 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	165.6	kg	157.87 ₹26,143.43	152.82 ₹25,307.14 Lowest
1.00	OD207876/2025-2026:Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	106.8	sqm	524.21 ₹55,985.63	507.44 ₹54,194.59 Lowest
1.01	OD207875/2025-2026:Ridge caping with pre painted galvanized steel 0.4 mm thick 60 cm wide including all cost and materials conveyance labour charges etc complete	30	metre	592.1 ₹17,763	573.16 ₹17,194.8 Lowest
1.01	OD208008/2025-2026:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1m interval	40	metre	429.39 ₹17,175.6	415.66 ₹16,626.4 Lowest
1.01	50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall	26	metre	222.23 ₹5,777.98	215.12 ₹5,593.12 Lowest
1.01	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	8.1	sqm	325.91 ₹2,639.87	315 ₹2,551.5 Lowest

Tender Value

₹2.5 L

EMD Value

₹6,343

Closing Date

6 Oct 2025, 11:00 amClosed

Tender Inviting Organisation

Name

AE Lsgd Panjal

Address

Office of Assistant engineer, Panjal GP

Work Description

Panjal GP 2025-26 Renovation works at Thuvarakkad Nagar Anganwadi in ward 3

Tender Information

Tender ID

2025_LSGD_801607_13

Reference Number

3/25-26 /AE/LID EW/PJL

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Panjal

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBID SECURITY REMITTANCE (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredINTEGRITY PACT CERTIFICATE (.pdf)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredE PAYMENT FORM (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredSBD AND NIT (.pdf)

RequiredBIDDERS LICENSE (.pdf)

RequiredGST DOCUMENT (.pdf)

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹560

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,343

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Nov 2025

Published

27 Sept 2025

Bid Opening

8 Oct 2025

Download Starts

27 Sept 2025

Download Ends

6 Oct 2025

Submission Starts

27 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1332633.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

FAHAD A Y

1₹2.1 LAccepted-AOC

RAVICHANDRAN M R

2₹2.1 L+₹6,918.94 (3.34%)Rejected-Finance

Sl No	Description	Qty	Unit	RAVICHANDRAN M R L2	FAHAD A Y L1
1.00Maintenance
1.00	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	96	sqm	143.92 ₹13,816.32	139.3 ₹13,372.8 Lowest
1.00	15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.	432	kg	4.91 ₹2,121.12	4.78 ₹2,064.96 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	320.4	kg	194.9 ₹62,445.96	188.67 ₹60,449.87 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	165.6	kg	157.87 ₹26,143.43	152.82 ₹25,307.14 Lowest
1.00	OD207876/2025-2026:Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	106.8	sqm	524.21 ₹55,985.63	507.44 ₹54,194.59 Lowest
1.01	OD207875/2025-2026:Ridge caping with pre painted galvanized steel 0.4 mm thick 60 cm wide including all cost and materials conveyance labour charges etc complete	30	metre	592.1 ₹17,763	573.16 ₹17,194.8 Lowest
1.01	OD208008/2025-2026:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1m interval	40	metre	429.39 ₹17,175.6	415.66 ₹16,626.4 Lowest
1.01	50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall	26	metre	222.23 ₹5,777.98	215.12 ₹5,593.12 Lowest
1.01	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	8.1	sqm	325.91 ₹2,639.87	315 ₹2,551.5 Lowest

Sl No

Description

Qty

Unit

RAVICHANDRAN M R

FAHAD A Y

1.00Maintenance

1.00

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

sqm

143.92

₹13,816.32

139.3

₹13,372.8

Lowest

1.00

15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

432

4.91

₹2,121.12

4.78

₹2,064.96

Lowest

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

320.4

194.9

₹62,445.96

188.67

₹60,449.87

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

165.6

157.87

₹26,143.43

152.82

₹25,307.14

Lowest

1.00

OD207876/2025-2026:Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

106.8

sqm

524.21

₹55,985.63

507.44

₹54,194.59

Lowest

1.01

OD207875/2025-2026:Ridge caping with pre painted galvanized steel 0.4 mm thick 60 cm wide including all cost and materials conveyance labour charges etc complete

metre

592.1

₹17,763

573.16

₹17,194.8

Lowest

1.01

OD208008/2025-2026:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1m interval

metre

429.39

₹17,175.6

415.66

₹16,626.4

Lowest

1.01

50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall

metre

222.23

₹5,777.98

215.12

₹5,593.12

Lowest

1.01

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

8.1

sqm

325.91

₹2,639.87

315

₹2,551.5

Lowest