MHSUY-2025-26-Construction Of Various Community Hall At Kamrej Taluka(1) Construction Of Community Hall At Village Orna, Ta:Kamrej , Dist-Surat. (2) Construction Of Community Hall At Village Dhoranpardi, Ta:Kamrej , Dist-Surat. (3) Construction Of Community Hall At Village Timba, Ta:Kamrej , Dist-Surat. (4)Construction Of Community Hall At Village Akhakhol, Ta:Kamrej , Dist-Surat.

Name of work :- MHSUY-2025-26-Construction Of Various Community Hall At Kamrej Taluka(1) Construction Of Community Hall At Village Orna, Ta:Kamrej

Dist-Surat. (2) Construction Of Community Hall At Village Dhoranpardi, Ta:Kamrej , Dist-Surat. (3) Construction Of Community Hall At Village Timba,

Ta:Kamrej , Dist-Surat. (4)Construction Of Community Hall At Village Akhakhol, Ta:Kamrej , Dist-Surat.

: : BILL OF QUANTITY : :

Percentage Rate Tender

Sr. Description of Item (with brief Specification and reference Quantity Unit Rate In Amount

No. to book of specifications) Figures

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated 270.12 CMT. 122.93

stuff upto 50 Meter lead. (A) Loose or soft soil

Excavation for foundation upto 1.5 m to 3.0 m depth including

sorting out and stacking of useful materials and disposing off

the excavated stuff upto 50 Meter lead. (A) Loose or soft soil

Filling available excavated earth (Including rock in trenches plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming and watering)

Providing & filling in plinth with murrum or yellow soil or selected

4 soil in layers of 20 cm. Thickness. Incl. watering, ramming & 86.28 CMT. 301.77

consolidation etc. complete.

Filling in plinth with sand under floors including watering ramming,

5 consolidating and dressing complete. '(A) Foundation and plinth 43.16 CMT. 481.80

Providing and laying cement concrete 1:2:4 (1- Cement :2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in foundation, footings

base of column and mass concrete. (A) Footing

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in All Types of Column

D) Column, Pillers, posts and struts , upto Plinth

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in All Types of Column

D) Column, Pillers, posts and struts, upto Ground Floor

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in All Types of Column

D) Column, Pillers, posts and struts, upto Terrace Floor

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of the cost of

reinforcement for reinforced concrete work in Beams. (E) Beam,

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in All Types of

Beams,(E) Beam, Ground Floor

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in All Types of Slab,All

Thickness (C) Slab upto Plinth and Ground Floor

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Lintel upto Ground

Providing and laying cement concrete M.200 and curing complete

inculding the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Chajja. Upto Ground

Providing and fixing TMT bars Fe-500D steel reinforcement for

R.C.C. work including binding, bending and placing in position

complete upto floor two level ,Ground Floor, First Floor,Second

Floor , Terrace Floor ,Lift Machine Floor (all floor).

Brick work using common brunt clay building bricks having crushing

strength not less than 35 kg/sqcm. in foundation and plinth in cement

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional

Ground floor upto Plinth

Brick work using common brunt clay building bricks having crushing

strength not less than 35 kg/sqcm. in superstructure above plinth

level upto floor two level in cement mortar 1:6 (1 cement :6 fine

sand) etc.comp. (B) Conventional Ground Floor

Brick work using common brunt clay building bricks having crushing

strength not less than 35 kg/sqcm. in superstructure above plinth

level upto floor two level in cement mortar 1:6 (1 cement :6 fine

sand) etc.comp. (B) Conventional First Floor

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in foundation and plinth (B)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or Full/half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) Ground Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or Full/half brick walls for interior plastering

and finished even and smooth in (ii) Cement mortar 1:4 (1-cement

:4-sand) First Floor

Providing & laying 10 mm. thick cement plaster in single coat on fair

side of ceilings for interior plastering upto floor two level and

finishing with smooth mala plaster.(i) Cement mortar 1:4 (1 cement :

4 sand) Ground Floor

20mm thick sand faced cement plaster on walls upto Any height

metres consisting of 12mm thick backing coat of C.M. 1:3 (1-cement

24 : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- 643.76 SMT 315.68

sand) etc. complete. Upto Ground Floor to Terrace (LMR) Floor

Providing and laying Granite Slab 18mm thick in Flooring laid

20mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) and

jointed with Grey Cement Slurry including full molded round front

edges , rubbing and polishing etc. complete.

Providing and laying Granite Slab 18mm thick in Risers of steps

Dedo, window sill, jembs and pillars laid 10 mm thick Cement

26 Mortar 1:4 (1-Cement : 4-Coarse Sand) and jointed with Grey 106.52 SMT 2,159.38

Cement Slurry including full molded round edges , rubbing and

polishing etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry,Soluble

Salt Vitrified Tiles Flooring.

Providing and fixing flush door both sides laminated and shutter

fabricated from 35 mm thick solid core malemine faced three layered

pre laminated flat pressed wood based exterior grade bonded

BWP/BWR synthetic resin having stamped IS 12823 grade I type II

29 including three coats of lacquer polishing to exposed wooden 49.56 SMT 2,838.10

surfaces and Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc. as per

architectural detailed drawing and as directed by engineer in charge..

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 66.00 x 50.00 x 1.50 mm(Wt

1.40 Kg / Rmt), horizontal two track member size Both Side 66.00 x

50.00 x 1.50 mm(Wt 1.40 Kg / Rmt), with sliding shutters of

horizontal member size 66.00 mm x 26.00 mm x 1.50mm (wt.of 0.90 37.20 SMT 1,583.95

Kg/mt), vertical member of size 66.00 mm x 26.00 mm x 1.50mm

(wt.of 0.90 Kg/mt) with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt.

31 Kg/mt) with colour anodized alluminium frame for ventilation with 5 8.64 SMT 1,175.55

mm thick frosted glass as details etc complete for Ventilation.

Providing and fixing M.S. grill of required pattern of windows etc.

with M.S.. flats at required spacing and frame alround square or

32 round headed bolts and nuts or by screws.including applying a 1152.00 Kg 116.15

priming coat of red lead paint and two coats of oil painting etc

complete (A)Plain grill.

Applying two coats of Birla (white cement based) or (acrylic lapy-

putty) or equivalent & two coats of primer of approved brand and

manufacture on new wall surface,Ceiling surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface,Ceiling surface

34 to give an even shade including throughly brushing the surface free 893.52 SMT 84.36

from mortar droppings and other foreign matter and sand papered

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

35 thoroughly brushing the surface to remove all dirt, and remains of 643.76 SMT 120.26

loose powdered materials.etc complete

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and other foreign matter and scoured with brushes fine steel

wood, scrapers and sand paper with ready mixed priming paint

36 brushing red lead. and Painting two coats (excluding priming coat) 45.84 SMT 128.62

on new steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other foreign

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound

conforming to IS:2645

,brick bats is finally covered by jointless cement plaster 20mm th. in

C.M. 1:4 added with special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

37 surface of the parapet & other adjoining wall up to height of about 288.00 SMT 880.72

300 mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at khurra

as 65 mm.'(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of

mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.) NOTE :- (1) The whole work is to

be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors

& conducting water proof test as directed. Unit Rate of 1 Sq.Mt.

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be tempered to

38 bring mortar creme out upto surface using white cement 288.00 SMT 779.69

including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

Providing and fixing Stainless Steel railing having 50 mm dia hollow

stainless steel pipe as hand rail and 32 mm dia hollow stainless steel

39 pipe with combination of 10 cm long 16mm dia pipe as per virtical 12.00 RMT 3,333.50

supports 20 mm dia hollow stainless steel pipes H

Providing and constructing sandwitch type Granite stone top &

bottom Kota Stone platform 0.6 mt. wide & 0.75 mt. height,

40 including front granite stone patti of 10 cm wide, vertical partitions 10.00 RMT 3,589.54

of Kota stone with cement Mortar(1:1) as required comp as per

instruction given by site in charge at all floors.

Providing and fixing wash down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) inculding

Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (A) vitreous China

Pattern :(i) in white colour

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the Providing and fixing C.P. brass waste for washbasin

or sink. (A) 32mmdia.,Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks and back nuts. (i)

15mm dia.,Providing and fixing brass screw down stop tap.(A)

15mm dia..(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the same (C)

44 S.S. & Sink.(i) 600mm x 450mm x 150mm size with Providing and 4.00 No 3,204.92

fixing C.P. brass waste for washbasin or sink. (A)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve. 25mm. dia.

Providing and fixing chromium plated brass half trun flush cock of

48 approved quality including fixing in pipe line etc. complete.(ii) 8.00 No 263.77

Providing and fixing ball cock of approved. quality as directed.(A)

Copper Metal (A) 25mm. dia.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

50 the help of clamp at every two metre C/C or shall be concealed as 84.00 RMT 72.65

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

51 the help of clamp at every two metre C/C or shall be concealed as 64.00 RMT 91.84

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing, laying and jointing in true line and level 110mm diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

52 fixed on wall using of PVC clamp of the size 110 mm diametre x 149 112.00 RMT 878.57

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.(B) 150mm

x 100mm size P or R type

Constructing Brick masonry road gully chamber 500mm x 450mm x

54 600mm including 500mm x 450mm C.I. horizontal grating wih frame 8.00 No 2,017.19

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

55 frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse 8.00 No 2,932.93

sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

56 diameter with collars and butt ends prepared for collar joints 40.00 RMT 257.19

including testing of joints complete. (B) 150 mm dia.

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Providing erecting and fixing double coated PVC. (ISI) water tank

59 of required capacity each with all necessary fittings and connection 4000.00 Litr 3.94

etc. complete on terrace.

Rs. Sixty Two Lack Twenty Six Thousand Three Hundred Seventy Three and Twenty Seven Paise Only.

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs… 6226373.27 Put to tender Rs…

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

*( please strike out whichever is not applicable)

Note The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In –

:- 1 Charge for which no extra payment shall bemade.

Note The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note GST and Income tax TDS will be deducted at a source while making payments of bills.

Note In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017

:- 4 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Panchayat (R&B) Sub Division Panchayat (R&B) Division

Signature of the contractor